|
|
Benchmarks With Points On Elliptic Curves
Brychta, Josef
This paper deals with benchmarks of generating random points and arithmetic operations with points on elliptic curves. These benchmarks were implemented on the hardware platforms Raspberry Pi Zero/1/2/3. The primary goal was to measure usage of the system resources and energetic consumption of that hardware platform. Specifically, it was memory and time consumption of Raspberry. In total, 48 elliptic curves of standards NIST, BRAINPOOL, GOST and FRP were measured.
|
|
|
The use of advanced composite materials for the design of concrete structures
Macháček, Jan ; Matušíková, Anna (referee) ; Girgle, František (advisor)
The diploma thesis deals with the design of concrete structures reinforced by FRP according to ACI, fib, CSA and EC2 regulations, which are stressed by a shear force. The diferences between steel rebar and FRP reinforcement were described, in particular its mechanical degradation over time and a different stress-strain diagram. Furthermore, shear capacity calculations were performed according to the regulations and compared with the real tests. Then the parametric analysis of shear strength was performed. In the practical part, the design of concrete floor slab structure supported by the pillars and walls was performed. The upper reinforcement of this slab was designed with FRP and the lower with steel rebar. Double-headed studs were used as a punching shear reinforcement.
|
|
|
Comparison of cryptographic primitives used in elliptic curve cryptograpny on different hardware platforms
Brychta, Josef ; Martinásek, Zdeněk (referee) ; Fujdiak, Radek (advisor)
This master thesis deals with the implementation of variants of cryptographic libraries containing primitives for elliptic curves. By creating custom metering charts to compare each implementation. The main task was not only the implementation of libraries but also the design and implementation of test scenarios together with the creation of measurement methods for different libraries and hardware platforms. As a result, a number of experimental tests were conducted on different curves and their parameters so that the results of the work included complex problems of elliptic curves in cryptography. The main parameters were power, time and memory consumption.
|
|
|
Study of properties of Fiber-Reinforced Polymers
Fojtášek, Martin ; Hela, Rudolf (referee) ; Bodnárová, Lenka (advisor)
Bachelor thesis deals with monitoring the properties of the FRP reinforcement when exposed to aggressive environments that cause degradation. In the theoretical part of this thesis there are described the method of production, the most commonly used types of FRP profiles, the composition of the FRP profiles, durability of FRP profiles against the action of aggressive environment and durability of the FRP material in the damage environment. Further more there are briefly described the most common types of tests on FRP profiles. In the experimental part of this thesis there are defined conditions for laboratory testing of FRP samples, which were stored in an alkaline environment at temperatures of 20 degrees, 40 degrees and 60 degrees. These samples of the FRP were stored and tested after 90 days. Subsequently there are described the changes of the physical properties of rebar in a time when saving in an aggressive environment.
|
|
|
FRP composite materials resistance to the effects of selected corrosive environments
Mičkal, Petr ; Prokeš,, Jan (referee) ; Bodnárová, Lenka (advisor)
This thesis deals with monitoring of the durability of FRP reinforcements in alkaline environments with differing temperature exposures. The theoretical part of the thesis consists of a general description of the FRP composites, the manufacturing of these FRP reinforcements using pultrusion technology, the resistance of these composites in aggressive alkaline environments, and the influence of temperature on the speed and manner of degradation. In the experimental part of this thesis, the FRP reinforcements were placed in an alkaline environment tempered at different temperatures (20 °C, 40 °C, 60 °C). Subsequently, any optical physical changes of the reinforcements were described and evaluated by the use of optical microscopy and the destructive tests of these reinforcements.
|
|
|
Study of durability of FRP reinforcements
Dipold, Václav ; Prokeš,, Jan (referee) ; Bodnárová, Lenka (advisor)
This thesis deals with monitoring the durability of FRP reinforcement in different types of environments which cause degradation. The theoretical part of the thesis describes reinforcing fibers, matrix materials, manufacturing technology of composite reinforcements by pultrusion and durability of FRP materials in environmental degradation. In the experimental part of this thesis was carried storing samples reinforcements in alkaline environment with various temperatures. As suitable were selected temperatures of 20 °C, 40 °C and 60 °C. Subsequently are described changes in physical properties of the reinforcements and tracking optical microscope.
|
|
|
Design of concrete structures with FRP reinforcement
Januš, Ondřej ; Girgle, František (referee) ; Štěpánek, Petr (advisor)
The diploma thesis presents design of construction with FRP reinforcement. Including design process of cross-section with FRP reinforcement exposed to bending moment and shear force at ultimate limite state according to given standards and guidelines. Long term physical and mechanical properties of FRPs are taking into account. There are also compared load capacities of cross-section exposed to combination of bending moment and axial force, which were designed according to mentioned standards. In another part of diploma thesis there is a design of construction (precast gatehouse) with FRP reinforcement and steel reinforcement with ordinary and lightweight concerete.
|
|
|
Monitoring the durability of FRP composite materials
Janák, Petr ; Prokeš,, Jan (referee) ; Bodnárová, Lenka (advisor)
This diploma thesis deals with evaluation of the conditions for laboratory testing of composite profiles with fiber-reinforced polymer (FRP). Theoretical part describes the main material properties of FRP profiles and method of manufacturing by pultrusion. Experimental part evaluates imposition of the test samples in alkaline environment and their subsequent changes in physical properties. Next part contains evaluation of cuts FRP profiles by electron microscopy in combination with element analysis. The outcome of this work is the method of evaluation of accelerated durability FRP profiles.
|
guest ::
