|
|
Steam boiler with grate firing , burning coal or wood biomas 200 t/ h, 9,3 MPa 520°C
Čech, Jaroslav ; Hudeček, Mirko (referee) ; Skála, Zdeněk (advisor)
The aim of the work is the design of a grate boiler of 200 t . h-1 output, which will burn brown coal or wood chips. The work is divided into several parts. First, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler was counted boiler efficiency. The design of individual heating surfaces is proposed and at the end are controlled the overall heat balance of the boiler. The calculation is supplemented by drawings.
|
|
|
Grate Biomass Boiler - 88 t/h; 9.6 MPa; 520 °C
Střecha, Josef ; Hudeček, Mirko (referee) ; Lisý, Martin (advisor)
This master's thesis deals with the design of stoker-fired boiler for combustion of biomass. The main points of work are stoichiometry calculation of combustion, determining the dew point of flue gas, calculation of losses, which ones serves for determination of boiler efficiency, dimension design and detail calculation of thermosetting surfaces. In the last chapter is numbered total balance and real thermal efficiency of boiler.
|
|
|
Steam boiler with grate firing burning wheat straw
Křivák, Petr ; Kohout, Přemysl (referee) ; Lisý, Martin (advisor)
The aim of the thesis is the design of the steam grate boilers of 40 t/h for straw burning. The required parameters are generated steam temperature 420 ° C and a pressure of 5.5 MPa. The specified fuel is cereal straw with a calorific value of 9.5 MJ/kg. The calculation is made from the stoichiometric calculation of elemental analysis, to calculate the individual dimensions and heating surfaces of the boiler.
|
|
|
The membrane wall of the boiler with an advanced flow control
Češla, Martin ; Tomáš, Zdeněk (referee) ; Tomáš,, Zdeněk (referee) ; Ing.Tomáš Zdeněk (referee) ; Pospíšil, Jiří (advisor)
The master thesis deals with hydraulic characteristics of once-through boilers and describes the problems which may arise during the flow of water through the evaporator. Especially the formation of aperiodic instability of the evaporator and hydraulic uniformity amongst every steam generating tube. The thesis describes parameters, which cause these problems, and solutions how to deal with them. The calculation has been done for evaporator of the boiler called K2 located in power station in Chvaletice.
|
|
|
Heat pump
Klíma, Martin ; Kloss, Ondřej (referee) ; Kaplan, Zdeněk (advisor)
Bachelor thesis describes and characterizes the heat pump. Summarizes the various types of heat pumps in terms of energy production, principles of their function and description of the differences between different types of compressors, use of refrigerant and its future development. Finally, here is my own view given the heat pump, which I prefer.
|
|
|
Direct cooling systems in food processing plants
Kotásek, Petr ; Vlček, Petr (referee) ; Formánek, Marian (advisor)
Diploma thesis deals with direct cooling systems in food processing plants. The work focuses on the description of the components of the refrigerant cycle, with emphasis on the choice of refrigerant. The result is a design of direct cooling system in the food factory in the variants with refrigerant R404A and R717. The work describes the advantages and disadvantages of various options. The work includes an experimental section which deals with the measure-ment and processing of the actual values of the refrigerant cycle and the comparison of two cold sources.
|
|
|
Boiler for Brown Coal Combustion
Pavlo, Matej ; Hoffman, Pavel (referee) ; Skála, Zdeněk (advisor)
The aim of the master’s thesis is thermal calculation and dimensional design of boiler of 235 t/h which burns brown coal. The work is divided into several parts. In the first part, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler, the boiler efficiency is counted. In the next part, thermal calculation of combustion chamber is calculated. Subsequently, design of the individual heating surfaces is proposed. Finally, the overall heat balance of the boiler is inspected. The calculation is supplemented by drawing of the boiler.
|
|
|
Industrial evaporators for process water treatment
Cacková, Tereza ; Havlásek, Martin (referee) ; Vondra, Marek (advisor)
Bachelor thesis is focused on industrial process water evaporators. The basic principles of evaporation were described and various types of industrial water evaporators were introduced. The main part of the thesis was a thorough research and creation of a database of industrial water evaporators, which is also a probe into the current situation on the water evaporator and sewage sludge market. Part of the thesis is also comparing evaporators with other thickening technologies.
|
|
|
Design HRSG 0,8Nm3/s, 450°C
Hatiar, Peter ; Kól, Přemysl (referee) ; Skála, Zdeněk (advisor)
This master’s thesis deals with the issue of design heat recovery steam generator. In the first part is realized calculation of stoichiometry and further the thermal balance of the boiler. The boiler was divided on the basis of thermal analysis in two heating surfaces that have been designed separately. The thesis also includes structural design and drawings of evaporator, economizer and their compilation.
|
|
|
Steam boiler for wood burning 40t/h
Mach, Ondřej ; Křemínský, pavel (referee) ; Skála, Zdeněk (advisor)
The purpose of this Diploma Thesis is the construction design of the steam-boiler for the combustion of biomass – wood pellets. For the specified parameters have been defined stoichiometric calculations and calculations enthalpy burnt gas. In sequence, there is designed and solved the configuraion of the steam-boiler, so that the result design and the number of the heat-delivery surfaces can be determined, in dependence on the required inlet parametres of the air and outlet parametresof the water vapour. These parametres mean the amount, the temparature and the pressure. The aim of the thesis is to make a design of the steam.boiler burning biomass according to the set parametres. This very ecological fuel can really substitute the fossil fuel and friendly respect the environment.
|
guest ::
