|
|
Hydration of biochar prepared by using microwave pyrolysis of municipal sludge
Miklasová, Marta ; Komendová, Renata (referee) ; Kučerík, Jiří (advisor)
Microwave pyrolysis represents a possible solution of municipal sludge disposal. One of the final products of pyrolysis is amorphous porous carbon material called biochar, which can be used in agriculture as a soil amendment. As a rule, biochar is hydrophobic, but its addition can lead to an increase in water holding capacity. However, reasons of this improvement cannot be explained only by its high porosity. This thesis aims to contribute to the understanding the interactions between biochar and water under various environmental-relevant conditions such as direct water addition method and water adsorption from ambient air at different relative humidity. The thermo-analytical methods are common for investigation of the relationship between water and organic materials. One of these methods, differential scanning calorimetry, was used in this thesis. The first experiment was focused on measuring of melting enthalpy of freezable water in biochar pores. The results reflect the influence of pore size and properties of ice structure. The extrapolation of concentration dependence to zero enthalpy was used to determine non-freezing water (0,13–0,15 mg·mg-1 biochar), which reflects microporosity of the biochar. The second experiment was focused on the determination of evaporation enthalpy of water from biochar, which is a measure of the strength of water binding in biochar. This value indirectly reflects the mechanisms of the intake and release of water by biochar. Comparing the results for bound and pure water showed that in biochar is water bound weaker about 10–20 %. This led to conclusion that biochar binds water relatively weakly and the water exchange between biochar and soil is fast, despite the biochar hydrophobicity.
|
|
|
The influence of recycled material on weathering and accelerated aging of high density polyethylene
Borguľová, Eva ; Tocháček, Jiří (referee) ; Bálková, Radka (advisor)
The thesis deals with the testing of moulded high-density polyethylene (HDPE) samples that have been exposed to natural weather conditions for 9 months and accelerated ageing at 65 °C for 1000 hours. One sample was white in colour (made from commercial granulate) and four were black, one of which would have been prepared from 10 year old recycled material (recyclate), the other three were blends of this with white HDPE at 30, 60 and 90 % ratios. Infrared spectroscopy with ATR technique, static and dynamic tensile testing, differential compensation calorimetry and thermogravimetric analysis were used to characterize the changes in composition, structure and mechanical properties. The results showed that photooxidation occurred in all samples after the 1st month of exposure. Inhibition of degradation was noted after 3 months but increased again with time. The change in the mechanistic properties over time is a response of cleavage and recombination, but also of crystallization or crosslinking. The black color proved to be a stabiliser, as the clear samples remained largely tough after accelerated ageing, in contrast to the white sample which became quite brittle, as confirmed by the highest carbonyl index value. Thus, it can be assumed that with moderate UV stabilization the recyclable material is reusable for production, especially the proportion of 30 % (higher proportions caused a decrease in toughness).
|
|
|
The influence of regranulate on structure and properties of high density polyethylene
Handlíř, Tadeáš ; Poláček, Petr (referee) ; Bálková, Radka (advisor)
The presented diploma thesis deals with the evaluation of the influence of the addition of 30, 60 and 90 % of recycled material on the structure and mechanical properties of high-density polyethylene (HDPE), where recycled material represents both HDPE from a several years old part and material multiple reprocessed by extrusion. The changes of supramolecular structure were examined by calorimetric measurement, which did not indicate degradation of the material due to multiple extrusion. Mechanical properties were investigated by tensile tests and dynamic-mechanical analysis. Both measurements showed the same trend, where the first and second pass of the material through the extruder led to improved mechanical properties, e.g. to increase stiffness, while the influence of the third and fourth passes through the extruder had not a significant effect on the mechanical properties. In terms of the structure and mechanical properties, a positive effect of the combination of material after the second extrusion passing (30%) with virgin material was recorded.
|
|
|
Influence of different forms of titanium dioxide nanoparticles on soil organic matter properties
Miklasová, Marta ; Řezáčová, Veronika (referee) ; Kučerík, Jiří (advisor)
Nanoparticles present potential risk for environmental compartments including soil. Previous works have been focused on negative effects of nanoparticles on soil biota, however studies about the influence of nanoparticles on soil properties are still limited. This thesis investigates an impact of 20 nm titanium dioxide nanoparticles on selected water properties in soil organic matter exposed to air with various relative humidity. Indeed, at 43, 70 and 95 % dominate different water types, i.e. water adsorbed on soil organic matter, water in water molecular bridges and phase water, respectively. Differential scanning calorimetry (DSC) was used in the study. An important finding is that nanoparticles reduce the stability of water molecular bridges under 70% relative air humidity and generally reduce evaporation enthalpy of water, which represents the ability of the soil to retain water. In the next part the influence of nanoparticles on total water in soil was observed. Under low relative humidity, rutile and anatase affected soil in different ways due to their various hydrophilicity. Under higher relative humidity this effect disappeared. In the last part, ice melting and water evaporation enthalpies of nanoparticle solutions were measured to confirm the presumed effect of nanoparticles on water. The ice melting enthalpy of the solutions was higher relatively to pure water, while the evaporation enthalpy showed a reverse trend (decrease). This confirmed the effects of nanoparticles both for pure water and soil water.
|
|
|
The study of behavior of platinum nanoparticles in environmental compartments
Berka, Michal ; Řezáčová, Veronika (referee) ; Komendová, Renata (advisor)
Platinum nanoparticles pose a risk to environmental compartments. The aim of this diploma thesis is to conduct research on the influence of platinum nanoparticles in a wide range of concentrations on soil properties at different humidities. Specifically, it is about influencing the stability of water molecular bridges, the content of aliphatic crystallites, the retention capacity of water in the soil and the strength of water binding. Furthermore, the amount of nanoparticles sorbed on the soil was also measured. These indicators give us more information about the influence of platinum nanoparticles on evapotranspiration and soil deterioration. Methods of thermal analysis (differential scanning calorimetry) and optical methods (atomic absorption spectrometry) were used for these researches. The theoretical part of the work is devoted to a comprehensive introduction to platinum and its nanoparticles, as well as aqueous molecular bridges. It has been found that 200 nm platinum nanoparticles affect the strength of aqueous molecular bridges, have no effect on aliphatic crystallite content, have minimal effect on soil water retention, and that the water bond strength decreases due to platinum nanoparticles at high relative humidity. With 200 nm platinum nanoparticles, complete adsorption to soil occurs over the entire concentration range. With 3 nm nanoparticles, the soil is supersaturated at higher concentrations and larger amounts are not adsorbed. The results show that the larger the size of the platinum nanoparticles, the lower the negative effect on evapotranspiration and soil function itself.
|
|
|
Study of interactions of the surfactant component of Septonex with selected proteins
Bohunská, Miroslava ; Pekař, Miloslav (referee) ; Krouská, Jitka (advisor)
The study of protein and surfactant interactions is of great significance in a number of applications, such as the cosmetic, food or pharmaceutical industries and many others. However, they require further study due to their compositional complexity and the limitations of current analytical approaches. In this thesis, the cationic surfactant septonex in combination with two differently charged proteins lysozyme and bovine serum albumin under different physiological conditions (temperature, surfactant concentration, environment and others) was selected to study the interactions. Characterization of protein-surfactant interactions is a very important but challenging task, therefore it is essential to use appropriate approaches to explore the nature of these interactions. In order to unify the information to provide rational models, calorimetric methods (DSC, ITC) and dynamic light scattering were used. Isothermal titration calorimetry monitors the evidence for the formation of the system of the mentioned substances and information on aggregation behavior, differential scanning calorimetry characterizes the thermal stability of proteins and dynamic light scattering made it possible to monitor changes in particle size. Both proteins have been proven to interact with positive septonex, even if the lysozyme molecule is also positively charged. However, significant differences were found between the two proteins. From the obtained results it is evident that the identical charge of the protein with the surfactant has an effect on the intensity of the measurement, although all measured interactions showed an endothermic character.
|
|
|
SStudy of crystalline structure of polyhydroxybutyrate and nucleating activity of selected additives
Sedláček, Zbyněk ; Tocháček, Jiří (referee) ; Bálková, Radka (advisor)
This diploma thesis deals with study of crystalline structure of polyhydroxybutyrate (PHB), which contains different types of additives for studying of their nucleation activity and which were prepared by mixing. It is about boronitrid (BN), sacharin, hydroxapatit, plasticizer Tegmer a tree types of talc. Crystal structure was analysed by differential scanning calorimetry and x-ray diffraction, supramolecular structure was observed by optical microscopy (polarized and confocal laser scanning). Nucleating activity was evaluated by isothermal and non-isothermal crystallization made on calorimeter and heated table of optical microscope. There is not influence of additives on crystallographic structure, but additives affects number and size of spherulites including crystal domains defects, which can have impact on final mechanical properties. BN and talcs react as nucleating agents, other additives during low and high cooling speeds (vc) inhibit nucleation and in middle cooling speeds are without effect. Nucleating activity is not evaluated by numerically, because decrease of crystallization temperature together with vc is not linear. Results of direct methods are based on picture analysis, which is great benefit for understanding of crystal behaviour of PHB.
|
|
|
Optimisation of Isolation Procedure and Characterization of Amorphous PHB granules
Kratochvíl, Zdeněk ; Obruča, Stanislav (referee) ; Kalina, Michal (advisor)
First artificial PHB granules were prepared under the terms of this thesis. The effect of used PHB solvent, ultrasonic bath temperature and time, solvent evaporation temperature and stabilizing agent nature was investigated using dynamic and electrophoretic light scattering. The most proper parameters were demonstrated at samples which were prepared by dissolving of PHB in chloroform, stabilizing with CTAB or lecithin, ultrasonifying at 35 °C followed by chloroform evaporating at 60 °C. Based on ATR-FTIR and Raman spectroscopy results, it was found out that PHB within the artificial granules were in crystalline form. The native PHB granules were isolated from Cupriavidus necator using either lysosyme, deoxyribonuclease and cell disruption by ultrasonification or digestion with alcalase, SDS and EDTA. Granules obtained by both isolation procedures were characterized by ATR-FTIR, Raman spectroscopy, light scattering techniques and DSC. According to the analyses results, the second mentioned procedure turned out to be more effective for obtaining the polymer in amorphous state. Furthermore, the polymer within granules recovered by using this procedure was thermally more stable. Last but not least, the native PHB granules samples were exposed to effect of acetone, lipase and sodium hypochlorite, assuming that polymer crystallinity should be increased by these chemicals in varying degrees. The highest degree of crystallinity was achieved after their treatment with lipase.
|
|
|
Mechanical properties and structure of blends of recycled polyethylene with linear low density polyethylene
Kocandová, Jana ; Poláček, Petr (referee) ; Bálková, Radka (advisor)
Recycled material produced during three months from packing polyethylene foils coming from three suppliers was analysed together with one recycled material under complaint from the point of melt flow index (MFI), composition and mechanical properties. The addition of linear low density polyethylene (LLDPE) into the recycled material was studied as well. It was measured melt flow index (MFI), Differential scanning calorimetry (DSC) together with Thermogravimetry methods were used to determine composition. Selected materials were pressed to obtain films with the thickness of 1 mm to determine tensile properties. Recycled materials contained 40–65% LLDPE, small amount of polypropylene as well as chalk. The content of LDPE and LLDPE varied within one supplier and thus mechanical properties did. The results showed the difference in quality of PE films separation among all suppliers. The problems with workability of material under complaint were caused by the material composition – the amount of LLDPE predominated. The addition of LLDPE into the recycled material in the range of 5–20 % increased MFI by 13-78%. Mechanical properties of blends rich in LLDPE were similar to those of clear LLDPE. The presence of LDPE influenced more markedly only the strength to break. The blends of LDPE and LLDPE were evaluated as immiscible but with high affinity of the components with increasing contend of LLDPE. No material was chemically degraded. The methods commonly performed in manufacture, especially MFI, are not able to differentiate LDPE form LLDPE – recommended is DSC.
|
|
|
Stability of natural oils used in cosmetics and pharmaceuticals
Milerová, Helena ; Enev, Vojtěch (referee) ; Hurčíková, Andrea (advisor)
The bachelor's thesis deals with the issue of stability of selected plant oils used in the cosmetic industry. Six oils were subjected to analysis using differential scanning calorimetry (DSC), which determined the oxidation onset temperatures for all samples. The aim of the thesis is to evaluate the use of the DSC method for obtaining data on the thermo-oxidative stability of plant oils. For comparison, the samples were also measured using the Rancimat method, a commercially established procedure in which the samples were exposed to elevated temperature using air flow. The results yielded induction periods, which indicate the time until the sample starts to oxidize. After measuring the samples using both methods, the oils were ranked according to their oxidative stability from the most stable to the least stable. The resulting sequences from both methods were nearly identical. DSC has proven to be a suitable method for measuring the thermo-oxidative stability of plant oils.
|
guest ::
