| |
|
Reducing of energy and ecological demands of brickmaking production
Blažek, Tomáš ; Skotal, Zbyněk (referee) ; Sokolář, Radomír (advisor)
This bachelor thesis focuses on the possibility of lowering the required firing tem-perature of brick body by adding different fluxes that promote the formation of the crystalline phase. The thesis also examines the possibility of reducing the amount of fuel required and the associated decrease in carbon dioxide production. Finally, the thesis presents the possibilities of using alternative lightweighting agents as a substitute for the currently used standard wood sawdust.
|
|
The effect of reduction cores on the properties of brick body
Kučera, Tomáš ; Stančík,, Hynek (referee) ; Sokolář, Radomír (advisor)
This diploma thesis deals with creation of reduction core problem mainly in fired roofing tiles. With those is the emphasis on the impermeability and frost resistance. Black reduction core is reducing frost resistance but depends on firing temperature. At 1060 °C the reduction in frost resistance is not as unfavorable as at 900 °C. This thesis includes overview of research conducted on reduction core topic. There is enough literature focusing on frost resistance, experimental part is focused mainly on the impact of reduction core on impermeability and compares two types of production mixtures used in Czech Republic (calcium-containing type from Hranice and non-calcium type from Stod). It includes comparison of mixtures with fluidized fly ash and dust from grinding masonry elements. It opens discussion if those mixtures can be used for reduction core elimination.
|
|
Brick Dust Arising During Grinding of Burnt Brickwork and Possibilities of its Utilization
Kocmánek, Tomáš ; Sokolář, Radomír (referee) ; Nevřivová, Lenka (advisor)
The diploma thesis focuses on the brick dust arising during grinding of burnt brickwork and the possibilities of its utilization. In the theoretical part origin and basic properties of brick dust is described. Some published results of research on the potential utilization of brick dust in various industries are presented here. Also proposal of utilization of brick dust in the ceramic industry is presented. In the practical part two ceramic raw materials and the two brick dust with different granulometry arising during grinding of burnt brickwork (made from these two ceramic raw materials) were selected. The effect of the addition of brick dust to the ceramic raw materials on the physical - mechanical properties of ceramic body after sintering was investigated.
|
|
The Combustion of Organic Lightweighting Agent in Brick Body
Kašíková, Milada ; Stančík,, Hynek (referee) ; Sokolář, Radomír (advisor)
This diploma thesis deals with the burnout of organic substances in the brick body using different types of lightener for different types of soils. The theoretical part summarizes the different ways of lightening and a descri-ption of burnable organic substances. The practical part contains the results of various experiments and individual graphs with the course of temperature increase during firing using various burnable substances.
|
|
Geopolymers based on fly ashes and brick body
Řezník, Bohuslav ; Lang,, Karel (referee) ; Příhoda,, Jiří (referee) ; Žižková, Nikol (referee) ; Rovnaníková, Pavla (advisor)
In line with the current focus on utilizing side products of various production processes, this dissertation thesis analyzes the process of alkali activation of particular side products: fly ash and brick fragments. This activation produces geopolymeric materials widely used in civil engineering. The thesis aims to optimize the geopolymerization process so that the resulting geopolymer is both ecologically and economically viable. To that end, the thesis studies the course of geopolymeric reaction between the alkali activator and fly ash from: (i) the Chvaletice power plant, (ii) the Dětmarovice power plant, and (iii) biomass combustion, as well as (iv) fluid fly ash from the Hodonín power plant. All experiments of geopolymeric reaction have focused on the factors influencing the synthesis of geopolymers—that is: composition of the alkali activator, the ratio of alumino-silicate to the activator, and the impact of temperature on structure of the synthesized geopolymer. Further, the thesis analyzed the synthesized polymer’s microstructure, phase composition, resistance against corrosive conditions, and compressive strength, as well as mechanical-fracture properties of selected fly-ash geopolymers. The thesis finds that the most suitable for geopolymeric synthesis appears to be the fly ash from the Chvaletice power plant in which case the obtained geopolymers showed best properties in the studied areas. The fly ash from the Dětmarovice power plant, biomass fly ash, and fluid fly ash have failed to reach acceptable properties. Separately, the thesis studies the geopolymerization of brick body that could be suitable input for alkali activation. The geopolymers synthesized from brick fragments resulted in materials of supperior mechanical strength. A mixed use of fly ash and brick fragments failed to show a synergetic effect. Properties of the resulting geopolymers have been inferior to the properties of geopolymers produced using just fly ash or just brick body.
|
|
Color Changing of the Ceramic brick.
Kocmánek, Tomáš ; Zach, Jiří (referee) ; Nevřivová, Lenka (advisor)
The bachelor’s thesis is focused on color correction of brick body. There are examples of pigments commonly used in various industrial fields, as well as studies on the use of waste products as additives in brickmaking industry, altering, among other things, the color of the brick body. In the experimental part of the thesis the effect of three selected ferric pigments and two selected correction clays on the color and selected physico-mechanical properties of the brick body was investigated.
|
|
The effect of reduction core on the water impermeability and frost resistance of brick body
Kučera, Tomáš ; Stančík,, Hynek (referee) ; Sokolář, Radomír (advisor)
The bachelor thesis reviews effect of reduction core on the basic physical and mechanical properties of fired roof tiles. Theoretical part summarizes the knowledge about the reduction cores effect on the properties of the brick body and describes the basic rules for the successful reduction core elimination during firing of the brick body. In the experimental part are mainly compared properties of porosity, bend strength, impermeability and frost resistance of laboratory prepared samples and those are compared based on differently developed reduction core due to different firing.
|
|
The Effect of Raw Materials on Sound Insulation of Brick Body
Bosák, Filip ; Stančík,, Hynek (referee) ; Sokolář, Radomír (advisor)
Diploma thesis is concerned with opportunities of increase sound isolution index for bricks. In theoretical part is summary of present knowledge about acoustic properties ceramic body field and theoretical calculations and measuring sound insulation as well as. Practically part is divided on apply and basic research. Under apply research is experiment, that considers impact quantity of raw materials using at brick factory in the Holice on the most significant technological properties of plastic paste and brick body, additionaly with the considering chances of increase sound insulation index. In basic research is experiment, that evaluates impact common use domestic brick´s raw materials on sound insulation. Sound insulation is evaluated indirectly by transsmision rate of ultrasound in a both cases.
|
|
The effect of fibres addition on the properties of brick body
Novotný, David ; Stančík,, Hynek (referee) ; Sokolář, Radomír (advisor)
This diploma thesis will discuss possibilities of using inorganic fibers to improve the mechanical properties of the resulting physical body bricks. Assessment of the effect of fiber length, fiber thickness is in the order of micrometers. In this work we were used fibers which are commercially produced for the purpose of reinforcement, but also waste fibers, which mainly serves as an insulator.
|