|
|
3D model of st. Johns' church in Brno-Bystrc
Vilčeková, Lýdia ; Suchánek, Milan (referee) ; Bartoněk, Dalibor (advisor)
The diploma thesis is about the measuring and creating the 3D model of the Church of St. John the Baptist and sv. John the Apostle in Brno – Bystrc. At the beginning the thesis specifies the location of the object and informs about its history. Then it focuses on the measuring of the object. After testing the accuracy of the detailed points, it brings the 3D model of the church in the program AutoCAD, v. 2018.
|
|
| |
|
|
Surveying of hospice building in Rajhrad
Papež, Jakub ; Hanzl, Vlastimil (referee) ; Bartoněk, Dalibor (advisor)
In this Diploma thesis, a 3D model and building plans of hospice building in Rajhrad was created. These products can be used by building management for planning reconstructions and annexes. In the introductory part of this work, informations about hospice building are presented. The second part is devoted to describing data collection for the model. The last largest part describes the modeling in AutoCAD 2014, creation of building plans and the accuracy testing of the final product.
|
|
|
Use of PhotoModeler program in forensic engineering practice
Zdražilová, Alena ; Klika, Pavel (referee) ; Daňhel, Petr (advisor)
The main task of this thesis is to find out dimensions of family house from photos and after that use this dimensions to create a 3D model. Another task is to create and then test optimal procedure of taking photographs of house for the purpose of work in PhotoModeler software and subsequent processing in Autocad. The result is a model that serves for creation of sections and taking measurements necessary for valuations of a family house. The optimum process should be a compromise of the simplest and the most accurate method of creating 3D models.
|
|
|
Restaurant chalupa
Pavíčková, Kristina ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The main aim of this master’s thesis is to elaborate the project documentation of a new restaurant Chalupa. Building is situated in area of the local camp on the edge of the town called Mořkov. The building has one above-ground floor and a partial basement. On above-ground floor, there are two main parts: restaurant and kitchen. Then there are also private room and sanitary facilities for both customers and staff. The building is designed as a CLT superstructure and has a gable roof. The vertical loadbearing structures and non-loadbearing walls are designed of CLT panels. The horizontal loadbearing structures are designed of reinforced cast-in-place concrete slab. Heating energy is supplied by pellet boiler. Ventilation is provided by air conditioning unit. Shading is provided by external louvers. In the third pard, I am creating the facility management plan for this building. The project and visualizations were carried out in the Autocad program.
|
|
|
Multifunctional buiding Dělnická
Horňáková, Veronika ; Velecký, Pavel (referee) ; Utíkalová, Ivana (advisor)
The subject of diploma thesis is processing of the desing documentation for new multifunctional building in the street Dělnická, cadastre unit Komín, Brno - Komin. The building is a 3 floors and one underground floor and is designed as a last building in the street on the nearly flat land. In the building is located non-residential space, dwelling units and studios. Non-residential space comprise seven parking spaces in a public underground garage, two stores barrier-free solution with the facilities and two studios 1 + 1. The residential part has two dwelling units 1 + kk, two dwelling units 2 +1 and two dwelling units 4 + kk. The building is based on a waterproof concrete structure "white tub". The vertical structure is built of clay blocks Porotherm, horizontal structures are cast-in-place reinforced concrete. The exterior building envelope is completed with thermal insulation. An internal staircase is cast-in-place reinforced concrete. The entrance to the garage for cars is possible by Autolift. The building is roofed with warm flat roof. The drawings are processed in AutoCAD software visualization are processed in Sketch Up
|
|
|
Tool for AutoCAD Sketches Protection
Smejkal, Adam ; Kačic, Matej (referee) ; Ovšonka, Daniel (advisor)
The main goal of this thesis is to develop a tool that helps to protect sensitive data in drawings created by AutoCAD 2016 using methods employed by information rights management systems (IRM). It studies general principles of data leak prevention, closely describes IRM systems and analyzes suitable methods to extend the functionality of AutoCAD with a goal of integrating it into an IRM system as a client application.
|
|
|
Possibilities of usage of computational systems for switchgear assembly design
Stejskal, Lukáš ; Ing. Jan Krejčí (ext.) (referee) ; Valenta, Jiří (advisor)
The main goal of my bachelor's thesis is to descriebe the CAD systems that are used by engineers to design the electric switchboard and the electric network. In my thesis I descriebed the main options of these systems. The other thing is which data formats are supported for data export and import. In the second part of my thesis I'm dealing with designing the electric switchboard and his type-testing. I'm only interested in the thermal and short circuit endurance during the designing part and during the switchboards testing part as well.
|
|
|
The Family House
Gross, Petr ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The subject of this bachelor thesis is an elaboration of design documentation for new building of a detached house realization. The house will be built in Krnov at the current built-up area. The house will be used as a housing for family of four. The object is partially basemented, with two floors, where the second floor makes up an attic. The building is covered with a mono-pitched roof. One part of the object is a garage for one car, which is accessible from the exterior and from the hall. External loadbearing structures are made of ceramic masonry in above-ground floor and of permanent formwork at a level below the ground. Floor structure consists of girder and inserts. The staircase is prefabricated. The dominant feature of the building are large glazed area, glazed staircase space and walkable terrace above the garage. The documentation are drawn in AutoCAD program.
|
|
|
3D model of church of st. Peter of Alkantara in Karviná
Giemza, Lukáš ; Dorda, Jiří (referee) ; Bartoněk, Dalibor (advisor)
The object of this diploma thesis is surveying and creation of 3D model of the church of st. Peter of Alcantara in Karviná. In the introduction this thesis is focused on history and localization of the church. In the next part is a description of data collection, computational work and graphic processing. The final results of the thesis are the wired model, which is created in MicroStation PowerDraft V8i, and the textured 3D model made in AutoCAD 2018.
|
guest ::
