|
|
Industrial Building - Review of Selected Reinforced Concrete Parts
Weber, Jozef ; Zlámal, Martin (referee) ; Švaříčková, Ivana (advisor)
Bachelor’s thesis deals with reinforced concrete floor structure. It is a 3D frame, which is composed of bar elements oriented in the longitudinal and transverse direction. The work is done calculating mean longitudinal beam and also the middle of the cross beam. Furthermore, the calculated floor structure, which operates in both directions. For the calculation of inner strength used computer program SCIA ENGINEER 2013.0, which operates on the Finite Element Method - FEM. All elements have been designed for ultimate and serviceability limit state. Work contains textual part, inner strength, static calculations, drawings and used documents.
|
|
|
Reinforced concrete structure
Vaněčková, Adéla ; Čairović, Dorde (referee) ; Šulák, Pavel (advisor)
The aim of bachelors thesis is to design of the frame monolithic reiforced concrete frame construcition of a multistoried garage. Project designe sof a typice storey of construction. The supporting structure consist of a frame consisting of rungs, which are stored by beams and slab. Rungs are supported by columns. Reaction of the structure are transmitted to the foundation soil by footings. The design was made according to standard ČSN EN 1992 – 1 – 1. Structural analisis was modeled using Scia Engineer 20014 – Student vision. The results were validated by simplified manual method.
|
|
|
Service Hall Velké Meziříčí, Administrative Part
Dulák, Michal ; Jeneš, Rostislav (referee) ; Podroužková, Božena (advisor)
The aim of this bachelor thesis was the design of reinforced concrete cast-in-place horizontal structures about the first floor of three-storied building. Horizontal constructions are made of two-field continuous slab. In static calculation the following are designed and evaluated : ceiling slab, beam, angled slab, staircase, landing, column. Construction has been designed to fulfill functionality and economic point of view. Drawing documentation is a part of the thesis.
|
|
|
Reinforced concrete structure of a multistoried garage
Klajba, Daniel ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The aim of bachelors’s thesis is to design monolithic reinforced concrete ceiling structure of a typical storey of a multistoried garage. The supporting structure consists of a frame consisting of rungs, which are stored by beams and slab. Rungs are supported by columns. Reactions of the structure are transmitted to the foundation soil by footings. The design was made according to standard ČSN EN 1992-1-1 for ultimate limit state. Structural analysis was performed using Scia Engineer 2012 – Student version. The results were validated by simplyfied manual method. Structure was modeled using Scia Engineer 2012 also in 3D together with second option of ceiling structure – locally supported plate. Comparison between these two variants was made.
|
|
|
Reinforced concrete structure of a multifunction building
Marková, Anna ; Buřič, Pavel (referee) ; Šulák, Pavel (advisor)
The aim of this qualification thesis is to design a reinforced concrete monolithic ceiling construction of typical floor. It concerns locally supported panel that is 250 mm thick and of irregular shape. The spread of the span is 6 x 6 m with the overshoot of 1,2 m. Inside the building there is a staircase with a lift and a plumbing stack that is surrounded by the monolithic reinforced concrete wall that is 300 mm thick. The structural height of the floor is 3500 mm. The pillars` cross-sections are 450/450 mm. An analysis using the end-element method, a static design and a drawing documentation of the ceiling panel were conducted within this thesis.
|
|
| |
|
|
Cranked ceiling slab
Maršalová, Jiřina ; Koláček, Jan (referee) ; Strnad, Jiří (advisor)
This bachelor work deals with the suggestion of spatially cranked concrete plate of family house and spiral staircase. The concrete desk of asymmetrical shape, which is reinforced in both directions, creates a ceiling construction of basement and is simply supported on the perimeter walls. The construction is dimensioned to the limiting state of carrying capacity and usability. Software programme RFEM 4.10 has been used for the calculation of internal forces.
|
|
|
Prestressed bridge over the river
Kačer, Karel ; Nečas, Radim (referee) ; Koláček, Jan (advisor)
As the thesis I chose static solving bridging the road. This is a real first-class roads situated near the city Kolín in the Central Region. The bridge will be used to transfer traffic across of local Sendražický stream. At the beginning I determined three main variants of supporting design and then I chose one for more detailed processing. It is a armored concrete slab solidified two prestressed ribs arching spanning 18.3 m The calculation is implemented by software Scia Engeneer in accordance to European standards.
|
|
|
Resistance of the roof structure loaded with photovoltaic panels
Holoubek, Jan ; Bažant,, Zdeněk (referee) ; Strnad, Jiří (advisor)
The aim of the thesis is to verify the resistance of the roof structure loaded with photovoltaic panels. On the roof of industrial building of rectangular plan with dimensions of 26,5 x 24,5 m in Hlinsko, the investor decided to install photovoltaic panels. Preliminary diagnostic survey showed only flexural reinforcement in the field of all considered load-bearing elements. Bending strength was assessed by these structural elements: reinforced concrete slab, reinforced concrete beam, reinforced concrete grinder. Static calculation includes a minimum reinforcement of support and necessary shear reinforcement, which must be demonstrated by a detailed diagnostic survey. The structural analysis includes the assessment of reinforced concrete beam deflection after loading. All assessments were performed according to currently valid Eurocodes. The calculation showed that all supporting elements meet the bending resistance and deflection of the beam is smaller than the limit value laid down in the EC, so the roof of the hall can be loaded with photovoltaic panels.
|
|
|
Reinforced concrete skeleton construction
Pevner, Jan ; Strnad,, Jiří (referee) ; Šulák, Pavel (advisor)
The bachelor project is aimed for design of monolithic reinforced concrete slab supported locally and stairs over the second floor in administrativ object, elaboration of design and reinforcement drawings to bending and shear. Calculation of internal forces is made by computer program SCIA Engineer with manual verification using simplified methods.
|
guest ::
