|
|
Model of the bridge for presentation of the member system
Chlup, Pavel ; Krejčí, Petr (referee) ; Appel, Martin (advisor)
In this bachelor thesis, the individual parts of the model bridge structure are explained with a brief commentary on their creation. Subsequently, the computational modelling of the problem using statics and its practical solution using strain gauges and MATLAB software is elaborated upon. The thesis is divided into a total of four chapters, where the first one is devoted to research on the application of statics and strain gauges. Subsequently, the function of each part of the fabricated model is formulated and a static model of the truss system which is equivalent to the fabricated model but is statically indeterminate without further considerations is presented. Then, the principle on which strain gauges are applied to solve the insolvability of the system is explained and as a result, the force action in the truss system as a function of the load is plotted using an application developed in MATLAB software. The result is a comparison of the measured and calculated values in the truss system.
|
|
|
Stress-deformation analysis of the indoor basketball construction
Kubíček, Daniel ; Kovář, Jaroslav (referee) ; Fuis, Vladimír (advisor)
The topic of this thesis is stress-strain analysis of a basketball structure in a gymnasium. This structure is divided into two parts. One part is modeled as a spatial bar system. The other part is modeled as a plane bar system. The first part of the paper deals with the research on the use of bar systems in sports. This is followed by the development of analytical computational models of the spatial and plane bar systems. These models are then used to calculate three different loading conditions. Subsequently, the models are developed for numerical solution. In the last part of this work, the analytical solution is verified by the numerical solution.
|
|
|
Stress-strain analysis of a crane arm
Mora, Lukáš ; Halabuk, Dávid (referee) ; Fuis, Vladimír (advisor)
The content of this bachelor’s work is a summarization of types of tower cranes and subsequent stress-strain analysis of the crane arm of the crane type 150EC-B8 Litronic located on the Šumavská street in Brno. Analytical stress-strain analysis is calculated with equations of equilibrium using joint method in various types of loading of the construction with MAPLE software. Numerical calculation is executed on 3D model of the construction in software ANSYS. The aim of this bachelor work is the verification of the correctness and comparison results of analytic calculation with numeric calculation and evaluation of the results from a limit states and deformation standpoint.
|
|
|
Stress-strain analysis of Kozlov lookout tower
Winter, Josef ; Vaverka, Jiří (referee) ; Fuis, Vladimír (advisor)
Bachelor thesis is aimed at stress and deformation analysis of strut frame. The object of interest is lookout tower Kozlov close to the city of Česká Třebová in region of Ústí nad Orlicí in Pardubice Department. The main aim is to simplify 3D model of strut frame and its analysis. At the beginning I deal with history of lookout towers, theoretical introduction of bar, strut frames and limit states. Then follows modelling of 3D model with modified topology of bars and following calculation for different static loading and calculation for static determination. At the end numerical calculation was done to compare chosen model with analytic solution.
|
|
|
Napjatostně deformační analýza rozhledny Hraniční vrch
Novák, Tomáš ; Skalka, Petr (referee) ; Fuis, Vladimír (advisor)
Bachelor thesis is focused on stress and deformation analysis of strut frame, which is based on lookout tower Hraniční vrch by the city Město Albrechtice. The main goal is to create simplified 3D model and his resulting analysis at various degree of static indeterminateness. The first part contains introduction to history of lookout tower, theoretical introduction to bar, strut frame and limit state, followed by calculation of three various static indeterminate level. In the last part is verification of analytic results by numeric method. Another goal is to create thesis, which will also give a guidence for future solver of more complex 3D strut frame.
|
|
|
Finite element solution of axially loaded bars using linear element
Plucnar, Tomáš ; Návrat, Tomáš (referee) ; Vaverka, Jiří (advisor)
This bachelor thesis deals with the finite element method for axially loaded bars using linear basis functions. The theoretical part briefly describes the theory of axially loaded bars and states the individual steps that lead from the initial differential equation to a system of linear algebraic equations. A Weak formulation of the differential equation is used to derive the system. Using the theory described in the first part, an algorithm is created in Matlab, which is used to solve four problems. The results are then compared with the analytical solution and with the model in Ansys.
|
|
|
Comparison of selected parameters of tensile strength of concrete
Rozsypalová, Iva ; Žítt, Petr (referee) ; Daněk, Petr (advisor)
The thesis deals with a comparison of the selected strength tension properties of the hardened concrete and finding relationships between them. This is essentially a simple tensile strength, tensile flexural strength and tensile splitting strength. The text describe the testing procedures to determine the tensile strength of concrete. Furthermore, there are presented the results of testing on different types of concrete (plain concrete, lightweight concrete, steel-fiber concrete, polymer-fibre concrete and high strength concrete). The conclusion deals with the derivation of dependancy between concrete strengths and comparing the values obtained from the available relations with the results of the tests.
|
|
|
Stress-strain analysis of the mast in Lelekovice
Vitouch, Matěj ; Vaverka, Jiří (referee) ; Fuis, Vladimír (advisor)
This bachelor thesis is focused on stress and deformation analysis of 3D strut frame. The main goal of this thesis is to create model of strut frame, which is based on TV transmitter in Lelekovice, and his resulting analysis at various degree of static indeterminateness and loads. There is also verification of analytic results by numeric method in Ansys Workbench.
|
|
|
Proposal of a program for solving of problems of simple tension/compression of bars and strut frames
Martínek, Tomáš ; Kubík, Petr (referee) ; Polzer, Stanislav (advisor)
The aim of this work is a program that will solve problems from the simple tension /compression bars and strut frames in the range of bachelor. The work consists of two programs developed in the Borland Delphi development environment. The programs allow the user to define a bar (strut frames) on the basis of the geometrical parameters and constraints, determine the rate of statical indetermination, make the necessary calculations and, if necessary, indicate the condition of deformation (a program for solving bars). The written part of the work serves as a manual.
|
|
|
Stress-strain analysis of the railway bridge in Zahrádky near Česká Lípa
Abdul moghni, Abdul rahman ; Vosynek, Petr (referee) ; Fuis, Vladimír (advisor)
Cílem této bakalářské práce je využití deformačně napěťové analýzy na Železniční most v Zahrádkách u České Lípy. Konstrukce mostu byla zjednodušena a vymodelována jako nosníková konstrukce. První část bakalářské práce byla věnována získávání vstupních dat a základních informacích z technické dokumentace mostu. V nosníkovém modelu bylo využito několik zjednodušení. První model považujeme za staticky neurčitý, zatímco druhý jako staticky určitou konstrukci. Každý model tedy obsahuje zátěž z důvodu vlastní váhy a zatížení způsobeno projíždějícím vlakem. Z důvodu objemnosti rovnic, využíváme k výpočtu software Maple. Zkontrolovali jsme i mezní stav vzpěru pro oba modely, avšak jsme uvažovali pouze zatížení vlastní váhou a zatížení způsobeno vlakem. Po získání analytických dat bylo důležité tyto výsledky ověřit. Toto bylo docíleno využitím metody konečných prvku za pomocí programu Ansys. Veškeré výpočty byly provedeny pro 2D modely. Jediná výjimka je numerická sekce, kde byl přidán 3D model za účelem porovnání s 2D modelem.
|
guest ::
