|
|
Městský dům
Baková, Erika ; Smola, Jaroslav (oponent) ; Ležatka, Lukáš (vedoucí práce)
Táto diplomová práca sa zameriava na komplexný architektonický a urbanistický návrh polyfunkčného mestského bloku v historickom centre Brna v stupni architektonickej štúdie. Cieľom projektu je harmonické začlenenie nových stavieb do historického kontextu mesta a rešpektovanie okolitej zástavby. Návrh rieši dostavbu existujúceho mestského bloku a vytvorenie nového mestského bloku medzi ulicami Veveří a Kounicova, čím vzniká nová ulica Závodní. Návrh zachováva pamätný strom ako kľúčový prvok verejného priestoru, fasáda domu mu uhýba a vzniká tak verejný priestor piazzetty s pamätným stromom ako dominantou. V rámci modro-zelenej infraštruktúry je do ulíc je integrovaná nová zeleň, objekty s plochými strechami majú navrhnutú vegetačnú strechu s fotovoltaickými panelmi. Architektonické riešenie zahŕňa dve podzemné podlažia určené na parkovanie, prízemie s aktívnym parterom s komerčnými a stravovacími prevádzkami a supermarketom, a päť nadzemných podlaží s bytovými jednotkami. Posledné nadzemné podlažie je od zvyšku odstúpené. Urbanistický návrh sa zameriava na spomalenie rušnej dopravy a stavia chodca do dominantnej pozície. Architektonický návrh rešpektuje charakter územia a spája tradičné tvary s novodobým vzhľadom. Konštrukčné riešenie objektu kombinuje železobetónový skeletový systém so keramickým stenovým systémom. Projekt využíva potenciál vyťaženia územia a prináša až 399 nových bytových jednotiek v zastúpení od 1+kk po 4+kk, s bytmi vyššieho štandardu v poslednom odstúpenom nadzemnom podlaží.
|
|
|
Production buildings, Production of aquariums in Brno
Baková, Erika ; Klement, Miloš (oponent) ; Boleslavská, Yvona (vedoucí práce) ; Bečkovský, David (vedoucí práce)
The aim of the bachelor thesis was to design a new industrial production hall for the production of aquariums for the company Akváriá Pavlica in Horní Heršpice. This project is based on an architectural study, which was developed within the subject AG035. The area of interest is located in the city part of Brno, Horní Heršpice. The plot is located at the edge of the suburban part of the city near the railway station. The building is located in the centre of the plot and is accessible by sidewalks for pedestrians, access roads with parking for cars and a bus, and a road with a handling area for trucks. Part of the design of the production hall was also the design of a water area on the plot, which would serve for representative purposes. The mass of the building consists of six trapezoidal modular blocks stacked together. The roof pitch and the leaning walls create a dynamic shape. The building envelope consists of sandwich panels and a glazed facade made of triple insulation glass, which together provide thermal insulation to the interior. The glass facade illuminates the exhibition and administrative area. The building is divided into four zones: the public zone, the production zone, the administrative zone and the technical building equipment zone. The interior partitions are made of lime-sand blocks, but the main supporting system of the building is a reinforced concrete skeletal structure. On pillars are placed steel trusses that support the roof structure. The roof surface is designed as a vegetation area and there are placed photovoltaic panels.
|
|
|
Production buildings, Production of aquariums in Brno
Baková, Erika ; Klement, Miloš (oponent) ; Boleslavská, Yvona (vedoucí práce) ; Bečkovský, David (vedoucí práce)
The aim of the bachelor thesis was to design a new industrial production hall for the production of aquariums for the company Akváriá Pavlica in Horní Heršpice. This project is based on an architectural study, which was developed within the subject AG035. The area of interest is located in the city part of Brno, Horní Heršpice. The plot is located at the edge of the suburban part of the city near the railway station. The building is located in the centre of the plot and is accessible by sidewalks for pedestrians, access roads with parking for cars and a bus, and a road with a handling area for trucks. Part of the design of the production hall was also the design of a water area on the plot, which would serve for representative purposes. The mass of the building consists of six trapezoidal modular blocks stacked together. The roof pitch and the leaning walls create a dynamic shape. The building envelope consists of sandwich panels and a glazed facade made of triple insulation glass, which together provide thermal insulation to the interior. The glass facade illuminates the exhibition and administrative area. The building is divided into four zones: the public zone, the production zone, the administrative zone and the technical building equipment zone. The interior partitions are made of lime-sand blocks, but the main supporting system of the building is a reinforced concrete skeletal structure. On pillars are placed steel trusses that support the roof structure. The roof surface is designed as a vegetation area and there are placed photovoltaic panels.
|
host ::
RSS.