|
|
Study of sterilization effect of dielectric barrier discharge on eucaryotic microorganisms
Vojkovská, Hana ; Ing.Hana Grossmannová, Ph.D. (referee) ; Kozáková, Zdenka (advisor)
Nowadays the wide spectrum of decontamination methods are used for the inactivation of microorganism on various materials and subjects. The serious disadvantage of the conventional decontaminations methods is stressing of the exposed material by heat or chemicals. The presented bachelor thesis discusses plasma sterilization, which is more friendly and more effective on the wide spectrum of procaryotic and eucaryotic microorganisms. Basically, the main inactivation factors for cells exposed to plasma are heat, UV radiation and various reactive species The work was focused on studying of the effect of the dielectric barrier discharge (DBD) operating at atmospheric pressure on bioindicator Aspergillus niger. Plasma was generated in nitrogen and argon. Paper and PET-foil wer used as the carrying medium. The influence of various working conditions on the efficiency of plasma sterilization was studied. Namely it was the influence of plasma exposition time, plasma power density, the type of operating gas and type of the medium supporting the microorganism. According to our results the efficiency of the plasma sterilization increases with increasing plasma power density, resp. the plasma exposition time. When comparing the results observed for the same conditions in argon and nitrogen the higher sterilization effect was reached in argon. The sterilization time was 40 – 120 second in dependence to plasma power density, gas and carrying medium. Furthermore the influence of the carrying medium on the sterilization efficiency was prooved. It was shown, that porous materials have a ”shadowing effect” for microorganisms. The microorganism may penetrate into the paper material and embed in pits and cavities. Such penetration could preclude the interaction of plasma with the microorganism, thereby decreasing the efficiency of spore inactivation. Additionaly paper porosity complicates the detachment of spores into solution, so it is reached less microorganisms as from the PET-foil. The discharge parameters were studied by means of the optical emission spectroscopy.
|
|
|
Study of elementary inactivation processes acting during sterilization of eucaryotic systems in dielectric barrier discharge
Vojkovská, Hana ; Machala, Zdenko (referee) ; Kozáková, Zdenka (advisor)
This diploma thesis is focused on studying of the effect of the dielectric barrier discharge (DBD) on eucaryotic microorganisms. Plasma sterilization is considered to be an alternative method to conventional sterilization processes. Contrary to standard decontamination methods it doesn´t stress exposed material by heat, pressure and chemicals. Plasma acts on eucaryotic and procaryotic systems by means of synergy of three inactivation mechanisms. They are various reactive species, UV radiation and heat. The Aspergillus niger has been chosen as a bio-indicator enabling to evaluate the effect of plasma assisted microbial inactivation. Plasma was generated in dielectric barrier discharge (DBD) at atmospheric pressure. Nitrogen and argon were used as working gases, paper and PET foil were used as carrying media. The influence of various working conditions on the sterilization effect was studied. Namely it was the influence of plasma exposition time, plasma power density, the type of operating gas and type of supporting medium. The effect of UV radiation in combination with temperature, temperature and direct plasma were studied separately. According to our results the efficiency of DBD increases with plasma power density, resp. plasma exposition time. When comparing sterilization efficiency of nitrogen and argon operating at the same conditions, the higher sterilization effect was observed in argon. The influence of the carrying medium on sterilization effectiveness was proved. It was caused by the different structure of surface. It was found out, that in our experimental setup the active species are probably the main inactivation mechanism. The influence of temperature on inactivation of microorganisms was negligible. The combination of UV radiation and temperature reached the decontamination level about 2 orders. The discharge parameters were studied by means of optical emmision spectroscopy. Scanning electron microscopy enabled to evaluate possible damage of exposed materials through DBD.
|
|
|
Study of elementary inactivation processes acting during sterilization of eucaryotic systems in dielectric barrier discharge
Vojkovská, Hana ; Machala, Zdenko (referee) ; Kozáková, Zdenka (advisor)
This diploma thesis is focused on studying of the effect of the dielectric barrier discharge (DBD) on eucaryotic microorganisms. Plasma sterilization is considered to be an alternative method to conventional sterilization processes. Contrary to standard decontamination methods it doesn´t stress exposed material by heat, pressure and chemicals. Plasma acts on eucaryotic and procaryotic systems by means of synergy of three inactivation mechanisms. They are various reactive species, UV radiation and heat. The Aspergillus niger has been chosen as a bio-indicator enabling to evaluate the effect of plasma assisted microbial inactivation. Plasma was generated in dielectric barrier discharge (DBD) at atmospheric pressure. Nitrogen and argon were used as working gases, paper and PET foil were used as carrying media. The influence of various working conditions on the sterilization effect was studied. Namely it was the influence of plasma exposition time, plasma power density, the type of operating gas and type of supporting medium. The effect of UV radiation in combination with temperature, temperature and direct plasma were studied separately. According to our results the efficiency of DBD increases with plasma power density, resp. plasma exposition time. When comparing sterilization efficiency of nitrogen and argon operating at the same conditions, the higher sterilization effect was observed in argon. The influence of the carrying medium on sterilization effectiveness was proved. It was caused by the different structure of surface. It was found out, that in our experimental setup the active species are probably the main inactivation mechanism. The influence of temperature on inactivation of microorganisms was negligible. The combination of UV radiation and temperature reached the decontamination level about 2 orders. The discharge parameters were studied by means of optical emmision spectroscopy. Scanning electron microscopy enabled to evaluate possible damage of exposed materials through DBD.
|
|
|
Study of sterilization effect of dielectric barrier discharge on eucaryotic microorganisms
Vojkovská, Hana ; Ing.Hana Grossmannová, Ph.D. (referee) ; Kozáková, Zdenka (advisor)
Nowadays the wide spectrum of decontamination methods are used for the inactivation of microorganism on various materials and subjects. The serious disadvantage of the conventional decontaminations methods is stressing of the exposed material by heat or chemicals. The presented bachelor thesis discusses plasma sterilization, which is more friendly and more effective on the wide spectrum of procaryotic and eucaryotic microorganisms. Basically, the main inactivation factors for cells exposed to plasma are heat, UV radiation and various reactive species The work was focused on studying of the effect of the dielectric barrier discharge (DBD) operating at atmospheric pressure on bioindicator Aspergillus niger. Plasma was generated in nitrogen and argon. Paper and PET-foil wer used as the carrying medium. The influence of various working conditions on the efficiency of plasma sterilization was studied. Namely it was the influence of plasma exposition time, plasma power density, the type of operating gas and type of the medium supporting the microorganism. According to our results the efficiency of the plasma sterilization increases with increasing plasma power density, resp. the plasma exposition time. When comparing the results observed for the same conditions in argon and nitrogen the higher sterilization effect was reached in argon. The sterilization time was 40 – 120 second in dependence to plasma power density, gas and carrying medium. Furthermore the influence of the carrying medium on the sterilization efficiency was prooved. It was shown, that porous materials have a ”shadowing effect” for microorganisms. The microorganism may penetrate into the paper material and embed in pits and cavities. Such penetration could preclude the interaction of plasma with the microorganism, thereby decreasing the efficiency of spore inactivation. Additionaly paper porosity complicates the detachment of spores into solution, so it is reached less microorganisms as from the PET-foil. The discharge parameters were studied by means of the optical emission spectroscopy.
|
guest ::
