|
|
Design of modular tubular heat exchanger
Marx, Sven ; Turek, Vojtěch (referee) ; Jegla, Zdeněk (advisor)
Hlavním cílem této práce je seznámit se s požadavky specifické procesní aplikace a návrhem výměníku tepla s křížovým tokem pracovních látek a zhodnotit návrh předmětného výměníku pomocí simulačního softwaru. Nejprve jsou v práci prozkoumány provozní podmínky rekuperace odpadního tepla a obecné možnosti návrhu a jsou uvedeny základní rovnice pro tepelný a hydraulický výpočet. Hlavní část práce se zaměřuje na modulární trubkový výměník tepla s křížovým tokem pracovních látek navržený pro experimentální výzkum rekuperace tepla a zanášení ze znečištěných spalin produkovaných spalováním alternativních paliv na VUT v Brně (VUT) na Ústavu procesního inženýrství (UPI). Nejprve je stručně představena situace v testovací laboratoři. Poté je popsán postup návrhu předmětného tepelného výměníku pomocí softwaru HTRI a výsledky jsou shrnuty a porovnány s cílovými požadavky. Následně je analyzována distribuce toku vody v trubkovém prostoru uvnitř jednoho ze čtyř identických modulů výměníku tepla užitím softwaru CDF pomocí tří různých simulačních přístupů. Jsou popsány dva přístupy využívající model turbulence k--SST a jeden přístup využívající model turbulence k--Realizable turbulence. Nakonec jsou diskutovány rozdíly mezi přístupy a výsledky simulací distribuce toku.
|
|
|
Nonconventional Utilisation of Wind Energy
Zajíc, Josef ; Turek, Vojtěch (referee) ; Jícha, Jaroslav (advisor)
The thesis considers utilization of the wind energy as source of energy for the production of hydrogen. In the first part, there is described the types of wind engine specialized especially on screw wind engines and their construction. After that follows the description of dilemmas usage of electric energy addicted in time and with it connected problems with accumulation elektricity by the help of various methods. The final part of the thesis is than addicted to statistic evaluation of wind conditions, description and suggestion of the equipment hydrogen management.
|
|
|
Study on the potential of an integrated waste-to-energy unit
Freisleben, Vít ; Turek, Vojtěch (referee) ; Jegla, Zdeněk (advisor)
This diploma thesis is focused on the design of technological modifications of the existing industrial unit „waste-to-energy“, used for thermal treatment of process waste gases containing VOC and CO while flue gas is produced. The main objective of the existing unit modification is to improve its operating parameters considering economy, ecology and energy utilization. In the first part, the current industrial plant was presented with all necessary process data. Furthermore, all the key equipment used for the waste gases treatment or for the utilization of waste heat was identified. In the main part of the thesis there are performed modifications of the existing unit including the technology of existing heat exchangers intensification, the design of new and more efficient heat exchangers and finally the catalytic oxidation technology implementation for the decomposition of pollutants contained in the waste gas. The result of the thesis is a technical, economic and ecological comparison of the proposed technological modifications with the existing operation.
|
|
|
Analysis of Flow Distribution in Systems with Dense Tube Bundles
Babička Fialová, Dominika ; Dohnal, Miloslav (referee) ; Turek, Vojtěch (advisor)
Considering heat transfer equipment with dense tube bundles, it is essential to ensure as uniform a fluid distribution into the tubes as possible in order to prevent various operating problems. This bachelor’s thesis therefore focuses on tube-side flow analysis in such equipment. CFD simulations were carried out using a diverse set of flow systems with outflow into a constant-pressure environment. The respective tube bundle geometries differed in densities and sizes, arrangements of the tubes, and tube diameters. Air was used as the working fluid in the majority of the cases, however, some of the simulations were also carried out with water. Data obtained from evaluations in the fluid flow modelling software ANSYS Fluent were further analysed and the influence of the mentioned differentiating parameters on flow distribution non-uniformity and pressure drop was investigated. According to the regression model, the dependence of flow distribution non-uniformity on density and size of the bundle and on mass flow rate per unit outflow area cannot be rejected with the standard significance level. As for pressure drop, the only parameter that was not rejected was mass flow rate per unit outflow area.
|
|
|
Application of process system engeneering
Hrncsjarová, Hana ; Turek, Vojtěch (referee) ; Jegla, Zdeněk (advisor)
The master’s thesis is focused on familiarization with modern techniques and procedures of process system engineering for identification of energy savings. In this case, process system engineering is applied to the issue of heat exchanger networks and in order to save energy, their retrofit is solved here. The current network pinch method, which uses mathematical programming options, is described for the retrofit of the heat exchanger networks. The method is presented in comparison to older development methods, mainly with the PDM. In addition, the calculation procedure is also developed by this method and in the Maple software environment it is applied to the case of heat exchanger network retrofit in the process of hydrogenation refining of oil. Part of the thesis is an evaluation of the results obtained, including a discussion of the properties of the method used.
|
|
|
Parametric Generator of Heat Exchanger Tube Bundle Mesh for OpenFOAM
Petrů, Martin ; Juřena, Tomáš (referee) ; Turek, Vojtěch (advisor)
This thesis deals with the basics of computational fluid dynamics (CFD), the reasons for its use, and the related necessity to create computational meshes. The next part of the thesis focuses on assessing the quality of computational meshes and, briefly, on computational methods of CFD. The available mesh generators are also compared, and an overview of meshing capabilities is provided. The following is basic information about the OpenFOAM software and its capabilities, in particular the creation of meshes using the blockMesh application. The following part of the thesis is focused on the description of the developed application and its functions for generating a high-quality computing mesh of a tube bundle heat exchanger for the OpenFOAM software. In conclusion, a steady flow simulation verifies the correctness of the created mesh and its sufficient quality.
|
|
|
New Elements of Heat Transfer Efficiency Improvement in Systems and Units
Turek, Vojtěch ; Klemeš,, Jiří (referee) ; Odstrčil, Miloslav (referee) ; Jegla, Zdeněk (advisor)
Zvýšení efektivity výměny tepla vede k poklesu spotřeby energie, což se následně projeví sníženými provozními náklady, poklesem produkce emisí a potažmo také snížením dopadu na životní prostředí. Běžné způsoby zefektivňování přenosu tepla jako např. přidání žeber či vestaveb do trubek ovšem nemusí být vždy vhodné nebo proveditelné -- zvláště při rekuperaci tepla z proudů s vysokou zanášivostí. Jelikož intenzita přestupu tepla závisí i na charakteru proudění, distribuci toku a zanášení, které lze všechny výrazně ovlivnit tvarem jednotlivých součástí distribučního systému, bylo sestaveno několik zjednodušených modelů pro rychlou a dostatečně přesnou predikci distribuce a také aplikace pro tvarovou optimalizaci distribučních systémů využívající právě tyto modely. Přesnost jednoho z modelů byla dále zvýšena pomocí dat získaných analýzou 282 distribučních systémů v softwaru ANSYS FLUENT. Vytvořené aplikace pak lze využít během návrhu zařízení na výměnu tepla ke zvýšení jejich výkonu a spolehlivosti.
|
|
|
Waste treatment in the Czech Republic
Janík, Prokop ; Turek, Vojtěch (referee) ; Bělohradský, Petr (advisor)
This bachelor thesis deals with the waste management in the Czech Republic and the possibilities how these wastes can be processed. In present period the waste production is tightly connected with the running of society. Waste and all the problems associated with their production and processing are delicate issue of present period. This is linked to technology developments and environmental quality in this field. Wastes are generated in both production and consumption of each product and conceal large quantity of raw materials and energy. Therefore, the biggest problem lies in finding the way in which energy and these raw materials are recovered and reused.
|
|
|
Fluid Flow in Nonstandard Process and Power Equipment
Chýlek, Martin ; Babička Fialová, Dominika (referee) ; Turek, Vojtěch (advisor)
Flow distribution has big importance in equipment with limited tube rows because it provides correct operation and sometimes specific flow distribution for technology purposes is needed. This thesis is focusing on flow analysis in these units using computational fluid dynamics (CFD). For analysis of such systems models with varying tube rows and varying perforated segment lengths were created. Analysis showed significant impact of flow manifold layout along with tube layout and number of tubes. Simplified 1D model using static pressure regain coefficient was created which provides much shorter computational times. Comparison of 1D and CFD models was made to determine field of their usage.
|
|
|
Utilisation of recycling machines in complex approach to waste treatment
Vlček, Zdeněk ; Turek, Vojtěch (referee) ; Bělohradský, Petr (advisor)
This bachelor thesis deals with a comprehensive approach to address the waste management system with the use of recycling machines. The work is divided into five chapters. The first chapter deals with waste such as ecological and economic problems. The second chapter examines the basic types of waste recycling. The third chapter concerns the legislation related to the management of waste. The fourth chapter contains a comparison of waste management and other EU countries. The last chapter contains the selected types of machines used in recycling.
|
guest ::
RSS feed.