|
|
The durability of cutting inserts during face milling
Spáčil, Radek ; Slaný, Martin (referee) ; Jaroš, Aleš (advisor)
The bachelor thesis deals with the wear of cutting tools in the form of cutting inserts during face milling. The thesis is divided into two parts. The first part is a form of search which describes milling technology and also includes progressive milling method HFC. The next chapter describes the types of using cutting materials with greater emphasis on sintered carbides. The third chapter deals with the basic methods of coating. The experimental part of bachelor thesis gives a description of used material, tool, machine, and the experimental progress. The aim of the experiment was to compare the durability and to compile the action of forces for cutting inserts. The experiment has shown that the cutting force increases as wear level increases.
|
|
|
On the analysis of thin-wall parts sawing
Spáčil, Radek ; Dvořáková, Jana (referee) ; Píška, Miroslav (advisor)
Master‘s thesis deals with sawing of the thin-walled parts with high speed steel slitting saw. At first the most used conventional and unconventional possibilities of materiál cutting are described by a form of search. The next chapter describes forces arising from splitting saw machining, including their dependence on a specific cutting force, a chip cross section and a engagement angle. The second part of the thesis deals with the technological improvement of the cutting process, where three possible solutions are considered – geometry of the cutting tool, PVD coating deposition of the cutting tool and process fluid change. In the experimental part non coated slitting saw with burrs, non coated deburred slitting saw and coated slitting saws are compared. Used coatings were Ti(C,N), Cr-Al-Si-N, Al-Cr-B-N, and TripleCoating Cr, which is consisting of three layers TiN + (Al,Ti)N + Cr-Al-Si-N. The experiment has shown that the cutting forces inceases as the edge radius and wear level of the cutting tool increases. Coated cuttung tools has shown lower differences between the first and the last cut. Slitting saws have been also used in real cutting process to verify experimental results.
|
|
|
On the analysis of thin-wall parts sawing
Spáčil, Radek ; Dvořáková, Jana (referee) ; Píška, Miroslav (advisor)
Master‘s thesis deals with sawing of the thin-walled parts with high speed steel slitting saw. At first the most used conventional and unconventional possibilities of materiál cutting are described by a form of search. The next chapter describes forces arising from splitting saw machining, including their dependence on a specific cutting force, a chip cross section and a engagement angle. The second part of the thesis deals with the technological improvement of the cutting process, where three possible solutions are considered – geometry of the cutting tool, PVD coating deposition of the cutting tool and process fluid change. In the experimental part non coated slitting saw with burrs, non coated deburred slitting saw and coated slitting saws are compared. Used coatings were Ti(C,N), Cr-Al-Si-N, Al-Cr-B-N, and TripleCoating Cr, which is consisting of three layers TiN + (Al,Ti)N + Cr-Al-Si-N. The experiment has shown that the cutting forces inceases as the edge radius and wear level of the cutting tool increases. Coated cuttung tools has shown lower differences between the first and the last cut. Slitting saws have been also used in real cutting process to verify experimental results.
|
|
|
The durability of cutting inserts during face milling
Spáčil, Radek ; Slaný, Martin (referee) ; Jaroš, Aleš (advisor)
The bachelor thesis deals with the wear of cutting tools in the form of cutting inserts during face milling. The thesis is divided into two parts. The first part is a form of search which describes milling technology and also includes progressive milling method HFC. The next chapter describes the types of using cutting materials with greater emphasis on sintered carbides. The third chapter deals with the basic methods of coating. The experimental part of bachelor thesis gives a description of used material, tool, machine, and the experimental progress. The aim of the experiment was to compare the durability and to compile the action of forces for cutting inserts. The experiment has shown that the cutting force increases as wear level increases.
|
guest ::
RSS feed.