|
|
Development of high polymer grout system
Ručková, Kateřina ; Seidlová, Michaela (referee) ; Drochytka, Rostislav (advisor)
Bachelor thesis is focused on polymer grout, designed for heavy engineering operations and energy industry. The aim of the thesis is to define the requirements for use of polymer grout and also evaluation of testing procedures and legislative regulations on properties of these materials. Based on theoretical knowledge gained from literature will be designed HighTech polymer grout using secondary input materials.
|
|
|
Development of polymer repairing material
Juřička, Viktor ; Seidlová, Michaela (referee) ; Drochytka, Rostislav (advisor)
Rehabilitation of concrete constructions is important and constantly evolving industry, where development of new, advanced materials contribute to increasing the quailty and effectivness of the remedation process. This work is focused on the development of repairing polymeric material that is able to withstand the conditions of the energy industry and other industrial operations, while effectively utilizing recycled materials. The thesis contains a detailed overview of legislative tests of individual properties and is proposing recipes of appropriate repairing polymeric materials, including a proposal for its application and the pretreatment of input materials.
|
|
|
Crystallization of coating systems based on epoxy resins.
Seidlová, Michaela ; Dohnálek,, Pavel (referee) ; Petránek, Vít (referee) ; Drochytka, Rostislav (referee) ; Bydžovský, Jiří (advisor)
Crystallisation of epoxy resins based on bisphenol A and bisphenol F is the natural property of these oligomers. However, manufacturers of paints and other systems based on these epoxy resins, strive to slow down the crystallisation process as much as possible, thereby prolonging the shelf life and improving the competitiveness of their products. The main aim of the thesis is generalisation of the factors influencing the crystallisation process of epoxy resins based on bisphenol A and bisphenol F, verifying new approaches to the possibility of influencing the crystallisation process and determining the possibility of using a certain degree of epoxy resins crystallinity based on bisphenol A and bisphenol F in the preparation and production of epoxy resinbased coating systems.
|
|
|
Mechanical and Chemical Surface Endurance of polymers materials, testing and posibilities fro improvements
Vaníček, Štěpán ; Seidlová, Michaela (referee) ; Petránek, Vít (advisor)
Mechanical and chemical resistant multilayer polymeric floors are the most important characteristics of classification in the evaluation of surface and texture. Mentioned as organic binders which are used for the realization of the matrix. Further discussion on how to get fillers forming the supporting folder. Created a summary of the key test of mechanical and chemical characteristics according to current standards. The theoretical part is concluded with a reflection on the possibilities of improving the surface resistance of synthetic floors. The practical part was focused on testing the strength, resistance to impact and adhesion to the base layer. Finally, the overall evaluation of the test results in accordance with the theoretical part.
|
|
|
Testing of antibacterial compositions based on Ag in PU and EP formulations
Seidlová, Michaela ; Doležalová Weissmannová, Helena (referee) ; Kučera, František (advisor)
Nowdays, an emphasis is plased on an antibacterial properties of various products, including floor and coating materials. This work is about an testing of effectivity of the chosen antibacterial agents in the water born and solvent free floor systems which are epoxide or polyurethane based. As first step, the most suitable representative of each floor system was chosen, the silver based agents (respectively silver anion Ag+ based) which should have an antibacterial effect when incorporated into the floor system was chosen. The selected ones are Ag/SiO2, Ag/TiO2, Ag/Al2O3, Ag/ZnO, Ag/BaO, Ag/zeolite, AgI. The necessary was a creating of the test method which has to offer exact and reproducable outputs. At the begining, the method came out from the norms ČSN EN ISO 20645 Squared textiles – Determination of antibacterial activity – Test of diffusion throught the agar plate, ČSN 79 3880 Testing of antimicrobial properties of material and product of boot industry, Antifugal and antibacterial properties. Testing by this way did not bring repriducable outputs. Only the bacterial strains Escherichia coli, Klebsiella pneumoniae and Staphylococcus aureus was used according to the norms. The method of recultivation was used for testing. The process is: an application of the coating on the bottom of the Petri´s dish, curing, appplication of the bacterial solution, cultivation for 24 hours at 37 °C, inoculation onto the agar in the Petri´s dish, cultivation for 24 hours at 37 °C, interpretation of the grow/inhibition of the bacteries. The results offer the overview about the advantages and disadvantages of each antibacterial agent in the chosen systems.
|
|
|
SPECIAL POLYMER COATINGS AND SCREEDS MATERIALS WITH USE OF SECONDARY RAW MATERIALS
Žlebek, Tomáš ; Seidlová, Michaela (referee) ; Bydžovský, Jiří (referee) ; Ďurica, Tibor (referee) ; Drochytka, Rostislav (advisor)
The work deals with the development of new polymeric coatings and screeds – epoxy, polyurethane and vinyl ester materials with the use of hazardous waste in the form of fillers. The areas that are destined for their landfill are constantly expanding and the costs of disposing of this waste are high. Their use eliminates negative impacts on the environment, but also leads to significant financial savings. The aim of this PhD thesis was to find a suitable way to treat selected hazardous waste and experimentally verify the possibilities of using the fillers pre-treated by optimal way in polymer coatings and screeds. The coatings and screeds are intended primarily for concrete substrates but the possibility of use on metal substrates, asphalt and cement-bonded particle boards was also been verified. These materials serve as a secondary protection of structures against the adverse effects of weather conditions. Secondary raw materials were used as fillers, which were fluidized bed combustion fly ash contaminated due to flue gas denitrification and specially pre-treated hazardous waste (solidification products). The aim was to proceed progressive use of the secondary raw materials as much as possible in order to reduce landfilling in the maximum possible way. It was necessary to treat hazardous waste in such a way that the most effective solidification would be achieved. The behavior of the solidifaction products in the polymer matrix, the distribution of particles in the structure and the disruption of coatings and screeds due to chemical stress were also investigated.
|
|
|
Crystallization of coating systems based on epoxy resins.
Seidlová, Michaela ; Dohnálek,, Pavel (referee) ; Petránek, Vít (referee) ; Drochytka, Rostislav (referee) ; Bydžovský, Jiří (advisor)
Crystallisation of epoxy resins based on bisphenol A and bisphenol F is the natural property of these oligomers. However, manufacturers of paints and other systems based on these epoxy resins, strive to slow down the crystallisation process as much as possible, thereby prolonging the shelf life and improving the competitiveness of their products. The main aim of the thesis is generalisation of the factors influencing the crystallisation process of epoxy resins based on bisphenol A and bisphenol F, verifying new approaches to the possibility of influencing the crystallisation process and determining the possibility of using a certain degree of epoxy resins crystallinity based on bisphenol A and bisphenol F in the preparation and production of epoxy resinbased coating systems.
|
|
|
Development of high polymer grout system
Ručková, Kateřina ; Seidlová, Michaela (referee) ; Drochytka, Rostislav (advisor)
Bachelor thesis is focused on polymer grout, designed for heavy engineering operations and energy industry. The aim of the thesis is to define the requirements for use of polymer grout and also evaluation of testing procedures and legislative regulations on properties of these materials. Based on theoretical knowledge gained from literature will be designed HighTech polymer grout using secondary input materials.
|
|
|
Development of polymer repairing material
Juřička, Viktor ; Seidlová, Michaela (referee) ; Drochytka, Rostislav (advisor)
Rehabilitation of concrete constructions is important and constantly evolving industry, where development of new, advanced materials contribute to increasing the quailty and effectivness of the remedation process. This work is focused on the development of repairing polymeric material that is able to withstand the conditions of the energy industry and other industrial operations, while effectively utilizing recycled materials. The thesis contains a detailed overview of legislative tests of individual properties and is proposing recipes of appropriate repairing polymeric materials, including a proposal for its application and the pretreatment of input materials.
|
|
|
Testing of antibacterial compositions based on Ag in PU and EP formulations
Seidlová, Michaela ; Doležalová Weissmannová, Helena (referee) ; Kučera, František (advisor)
Nowdays, an emphasis is plased on an antibacterial properties of various products, including floor and coating materials. This work is about an testing of effectivity of the chosen antibacterial agents in the water born and solvent free floor systems which are epoxide or polyurethane based. As first step, the most suitable representative of each floor system was chosen, the silver based agents (respectively silver anion Ag+ based) which should have an antibacterial effect when incorporated into the floor system was chosen. The selected ones are Ag/SiO2, Ag/TiO2, Ag/Al2O3, Ag/ZnO, Ag/BaO, Ag/zeolite, AgI. The necessary was a creating of the test method which has to offer exact and reproducable outputs. At the begining, the method came out from the norms ČSN EN ISO 20645 Squared textiles – Determination of antibacterial activity – Test of diffusion throught the agar plate, ČSN 79 3880 Testing of antimicrobial properties of material and product of boot industry, Antifugal and antibacterial properties. Testing by this way did not bring repriducable outputs. Only the bacterial strains Escherichia coli, Klebsiella pneumoniae and Staphylococcus aureus was used according to the norms. The method of recultivation was used for testing. The process is: an application of the coating on the bottom of the Petri´s dish, curing, appplication of the bacterial solution, cultivation for 24 hours at 37 °C, inoculation onto the agar in the Petri´s dish, cultivation for 24 hours at 37 °C, interpretation of the grow/inhibition of the bacteries. The results offer the overview about the advantages and disadvantages of each antibacterial agent in the chosen systems.
|
guest ::
RSS feed.