|
|
Design and analysis of electronically reconfigurable filtering structures
Kříčka, Tomáš ; Dvořák, Jan (referee) ; Langhammer, Lukáš (advisor)
This bachelor thesis deals with the proposal of analog filters with the ability of the electronic reconfiguration. The main aim was to propose three fully electronically reconfigurable filters using different methods. The work focuses on the use of modern active elements that ensure the electronic reconfiguration. Specifically on operational transconductivity amplifiers, second-generation current conveyors and current amplifiers. The transfer functions are simulated in the Orcad PSpice software, at the ideal and behavioral level. Sensitivity and parasitic analysis is applied to the two proposed filtration structures. Both structures are made on printed circuit boards, which are measured and then their transfer functions are compared with the simulated functions.
|
|
|
Fully-differential frequency filter designing with current active elements using signal-flow graphs method
Štork, Petr ; Jeřábek, Jan (referee) ; Langhammer, Lukáš (advisor)
This master’s thesis deals with designing of fully-differential current-mode frequency filters using signal-flow graphs method. The first part is focused on a general description of frequency filters, its function and division. Active elements that create these frequency filters, such as multi-output current follower (MO-CF), balanced or multi-output transconductance amplifier (BOTA, MOTA) and digitally adjustace current amplifier (DACA) are described in the following part. Next, problems and various techniques of designing such filters are discussed on a theoretic basis. In the remaining part of the thesis there are six circuits of frequency filters described in detail; these connections are then transferred of passive elements to a proposed connections, with the assistance of a so-called reflection. Calculations of passive form are stated, as well as results of simulations, where nondifferential and differential variations of these designed frequency filters are compared. Finaly, it has been selected some variants of designs, which has been manufactured, then measured out and resulet has been compare between each other.
|
|
|
Synthesis of the electronically reconfigurable frequency filters
Michalička, Filip ; Dvořák, Jan (referee) ; Langhammer, Lukáš (advisor)
This diploma thesis deals with design of reconection-less electronically reconfigurable filter structures which have single input and single output using unconventional active elements, which have ability to adjust one of their parameter e.g. gain or transconductance. The first part describes basic parameters of frequency filters, the division of filters by frequency transfer response and used circuit elements, their operational modes, the principle of reconnection-less electronically reconfiguration and the circuit design method MUNV. Second part describes all active elements used in the proposal of filters, their properties and the implementation using existing transistor-level models. The third part contains the design of three reconnection-less electronically reconfigurable filters and the simulations results obtained from simulation programs OrCAD Capture and PSpice. The obtained results were compared with theoretical behaviour. This part also contains results of these analyses: sensitivity, parasitic, Monte Carlo and temperature to determine the behaviour in varied cases.
|
|
|
Electronically reconfigurable frequency filters
Gajdoš, Adam ; Langhammer, Lukáš (referee) ; Jeřábek, Jan (advisor)
The aim of the thesis was design of reconnection-less and electronically reconfigurable filters of SISO type with non-traditional active elements. Adjustability of bandwidth or quality factor is also required. First part of the thesis deals with theoretical analysis of filters, their operation modes and design of frequency filters using Signal-flow graph method aswell. Last but not least, electronical reconfiguration of transfer function and parasitic analysis was discussed. Another part describes active elements used in the practical part of thesis. Behaviors and design of active elements using existing circuits (e.g. UCC,EL2082) are described and their transformation into the Signal-flow graph form too. In the practical part five reconnection-less and reconfigurable filters of SISO type was designed using SNAP program. Simulations were done using Orcad program with ideal and real simulation models of active elements. Last part deals with filter design in EAGLE and experimental measurement.
|
|
|
Laboratory exercises for network technologies education
Kapusta, Martin ; Langhammer, Lukáš (referee) ; Dvořák, Jan (advisor)
The aim of the diploma thesis is to choose network simulator suitable for network technologies laboratory tasks for educational use. Theoretical part of thesis describes basics of network communication, addressing, reference models. Thesis also describes standards Wi Fi, Ethernet and routing protocol OSPF - technologies which are discussed in laboratory tasks. The practical part of diploma thesis describes a few available network simulators suitable for creating two laboratory tasks. Finally, the NS-3 simulator was chosen. Both laboratory tasks include theoretical introduction, detailed description of source code, individual tasks, expected outputs and control questions which senses understanding of discussed technologies.
|
|
|
Fully-Differential Frequency Filters with Modern Active Elements
Langhammer, Lukáš ; Dostál, Tomáš (referee) ; Štork, Milan (referee) ; Jeřábek, Jan (advisor)
Tato disertační práce se zaměřuje na výzkum v oblasti frekvenčních filtrů. Hlavním cílem je navrhnout a analyzovat plně diferenční kmitočtové filtry pracující v proudovém módu a využívající moderní aktivní prvky. Prezentované filtry jsou navrženy za použití proudových sledovačů, operačních transkonduktančních zesilovačů, plně diferenčních proudových zesilovačů a transrezistančních zesilovačů. Návrh se zaměřuje na možnost řídit některý z typických parametrů filtru pomocí řiditelných aktivních prvků, které jsou vhodně umístněny do obvodové struktury. Jednotlivé prezentované filtry jsou navrženy v nediferenční a diferenční verzi. Velký důraz je věnován srovnání plně diferenčních struktur s jejich odpovídajícími nediferenčními formami. Funkčnost jednotlivých návrhů je ověřena simulacemi a v některých případech i experimentálním měřením.
|
|
|
Analogue emulators of fractional-order circuits
Kubát, Pavel ; Langhammer, Lukáš (referee) ; Dvořák, Jan (advisor)
Diploma thesis deals with circuits contain fractional-order elements. The first part of this paper deals with this problem, there were also described methods of design fractionalorder elements and types of circuits containing the fractiona-order elements which can be applied in practice. Used active elements for practical part can be found in the second chapter. Design of GIC circuits and implementation of fractional-order element inside the circuit are shown in the last chapture. Parasitic analysis and stability of frequency filter containing fractional-order element had been also described.
|
|
|
Laboratory scenarios describing DNS system
Sakala, Peter ; Langhammer, Lukáš (referee) ; Jeřábek, Jan (advisor)
The master’s thesis deals with Domain Name System (DNS) and its practical use. It describes hierarchy of domain names, resource record types, protocol used, as well as DNSSEC extension. The most utilized implementations of authoritative and recursive DNS servers are presented. Virtualization, containers and other tools with potential use in labs are described. Two lab scenarios in virtualized environment with instructions for students were designed and developed in this thesis.
|
|
|
Laboratory exercises explaining the principles of network technologies and protocols
Hricko, Tomáš ; Jeřábek, Jan (referee) ; Langhammer, Lukáš (advisor)
The aim of this diploma thesis is to create two exercises for students. The first exercise is concerned with comparison of transport protocols TCP and UDP. The second exercise is concerned with comparison of routing protocols OSPF and RIP. The first part describes used simulation environment. The next part describes the operating system used in routers. The following part describes the procedure of installing virtual machines. The next part consists of theory of protocols TCP, UDP, OSPF and RIP. The last two chapters are the laboratory exercises.
|
|
|
Fractional-order filter structures
Lefler, Filip ; Langhammer, Lukáš (referee) ; Dvořák, Jan (advisor)
Semestral thesis deals with fractional-order frequency filters. There is descripe proposal of the filter, their simulations and practical realizations. The first part is focused at the introduction to a frequency filters. The following is chapter which explore various proposals fractional-order frequency filters. The next chapter describes used activ elements in this thesis. Then there is briefly described a method of the signal flow graphs. The following is a description of the theoretical design of lowpass and highpass frequency filter, where order of the filter is between the first and second. Another part deal with the design and simulation of the four circuits. There are two curcuits consists of transconductance amplifiers (BOTA) and two curcuist consists of current followers. The last part of the thesis deals with practical realization of the two fractional-order filters.
|
guest ::
RSS feed.