|
|
Analysis, assessment and management of risks of manufacturing process
Ďurovcová, Júlia ; Balgová, Zuzana (referee) ; Hrabová, Kristýna (advisor)
This thesis focuses on risk management in the production process of Frentech Aerospace, s.r.o. At the beginning the thesis covers the theoretical background of risk management, quality management and safety. This knowledge has been expanded with quality and safety requirements based on international standards. For a proper measurement of the identified hazards, a perfect understanding of the evaluated system is necessary. For this reason, the method of process flow diagrams was used to provide a visual representation of the company's production process, together with a description of the individual production operations. The FTA method was selected to identify the causes of the failure conditions, which provided the basis for the final failure mode and consequence analysis. Due to the systematic approach of risk identification and assessment, the most serious process risks were selected. These are provided in the thesis with recommended preventive suggestions that lead to the minimization of the identified risks.
|
|
|
Risk Assessment of Textile Waste Management
Šindlerová, Vanesa ; Vymazal, Tomáš (referee) ; Hrabová, Kristýna (advisor)
This thesis deals with environmental risks arising from textile waste management. The introduction describes the context of textile problematics and maps the current situation of textile waste management. The main goal of this thesis is to determinate the environmental risks of low percentage of recycling. Recycling is one way of dealing with textile that mitigates the impact on the environment. For the evaluation of the causes and consequences of the researched problem are used Bow-tie analysis and Ishikawa’s diagram. The results of the work bring environmental risks resulting from the application of those selected methods. Part of the thesis is a questionnaire that evaluates the individual’s attitude to textiles. Results of the questionnaire reveals that not needed textiles are perceived as risk to the environment. At the same time, consumer behavior does not correspond with efforts to mitigate the identified impacts.
|
|
|
Proactive Risk Analysis in Business Practice - Methods and Procedures
Dočkalová, Pavla ; Hrabová, Kristýna (referee) ; Kruliš, Jiří (advisor)
The diploma thesis deals with proactive risk analysis in company X, which manufactures mainly meat products. The thesis is divided into 2 parts. The first part concentrates on theoretical knowledge including a list of methods suitable for risk analysis. This part also includes the introduction of the company, description of processes into the company, and actual risk management. The second part includes risk analysis with the IPR method and FMEA method. Based on the results of the applied methods, measures to minimize the identified risks are proposed at the end of the work.
|
|
|
Indoor pool ventilation
Hrabová, Kristýna ; Uher, Pavel (referee) ; Rubinová, Olga (advisor)
The bachelor thesis designed ventilation for the pool hall. Hall is divided on four separate working units. The first device is designed as an air-conditioning unit for the changing room. For swimming pool were designed swimming pool air conditioning units with heat pump. Air in the hall with a water slide is adjusted using the forced ventilation unit.
|
|
| |
|
|
Risk management in the organization
Kochová, Adriána ; Balgová, Zuzana (referee) ; Hrabová, Kristýna (advisor)
The diploma thesis focuses on the general process of risk management in the selected company Appelis.com, a.s., branch plant. At the beginning, a basic search on a given topic is defined, such as risk, risk approaches or risk reduction methods. The main objective, the sub-objectives and the methods needed to achieve them are set out below. In the next part there is an analytical part of the current state of the company. It is an overview of the internal and external environment of the company, afterwards summarized into the SWOT analysis. The outputs of potential risks are made from previous analyzes and their severity is assessed in the risk matrix. At the end of the thesis, there is a discussion and suggestions for risk management in the company. The main output of this work is the identification and analysis of potential risks that may affect the organization.
|
|
|
Risks of Financing a Sports Club
Luu, David ; Hrabová, Kristýna (referee) ; Adamec, Vladimír (advisor)
Author of this diploma thesis deals with application methods and risk analysis for financing of the sport club. The goal is to analyse and describe the present situation of financing the sport club. Output of this thesis is the proposal leading to improvement of the financial situation of the club.
|
|
|
Evaluation of the current condition of the bridge structure
Urbánek, Filip ; Hrabová, Kristýna (referee) ; Láník, Jaromír (advisor)
The diploma thesis deals with the execution and evaluation of a structural and technical survey of a reinforced concrete bridge structure from 1923. The second objective of the thesis is to calculate the load-bearing capacity of the structure with regard to the results of the tests carried out. The theoretical part briefly describes the history of bridge construction, the methodology of bridge inspections and methods of diagnostic survey. In the practical part, in situ tests are carried out with subsequent laboratory evaluation and calculation of the necessary parameters. The geometric and material parameters of the structure were used as a basis for the creation of a structural model. The normal, exceptional and exclusive load capacities were recalculated and the necessary repairs and rehabilitation were proposed with regard to the observed condition of the bridge structure.
|
|
|
Analysis and Management of Risks in terms of OHS
Rapantová, Eva ; Vymazal, Tomáš (referee) ; Hrabová, Kristýna (advisor)
This diploma thesis covers the risk analysis and risk management related to occupactional health and safety (OSH). The analysis of the current situation is done concerning the legislation of the Czech Republic and the European Union. The extension of the legal duties and obligations are formed by standards that follow the legislation, possibly provide the sphere for implementation and maintenance of the OSH management. Due to the interconnections between OSH and seeking the risks at the workplace, it is appropriate to use the methods for identifications and analysis of these risks. The chosen methods are applied in the research part of this work. The system access for searching and evaluating the risks provides data to find the weak spots causing risks at the workplace. For the main risks, the measures are proposed to eliminate them or at least minimize their occurrence. These measures and procedures and proposed with regards to their costs.
|
|
|
Technical Risk Analysis
Sekanina, Jiří ; Hrabová, Kristýna (referee) ; Novotný, Radovan (advisor)
This master‘s thesis, entitled Technical Risk Analysis, focuses on the new harmonized FMEA method. The theoretical part deals with advanced quality planning, quality tools and a detailed description of all seven steps of the new FMEA method. The main goal of this work is to describe the harmonized FMEA method and create a case study on the topic of nonconforming product management. The harmonized FMEA will be illustrated in this case study.
|
guest ::
RSS feed.