|
|
Adjustable switching power supply
Vyroubal, Rostislav ; Urbanec, Tomáš (referee) ; Baran, Ondřej (advisor)
The aim of this bachelor’s thesis is to create a summary of the convertors, their principles, and to propose the convertor with specific parameters. The printed circuit board is designed for this convertor. Designed convertor is manufactured. Its specific parameters are measured and compared with theoretical parameters. A heatsink is designed for this convertor.
|
|
|
LNA for the APT signals receiver
Žúrek, Dan ; Urbanec, Tomáš (referee) ; Baran, Ondřej (advisor)
This bachelor thesis is dealing with design, realization and optimization of the LNA (Lownoise amplifier) for receiving of APT signals from the NOAA weather satellites in 137 MHz – 138 MHz frequency band. The first part of this work is aimed on critical parameters of the amplifier and the filter circuits especially on a noise figure and a high selectivity. The next part of this project is about the particular concept and simulation of LNA by using the Ansoft Designer software. The printed circuit board is realized in the Cadsoft Eagle. The final part of this bachelor thesis is dealing with a production of such amplifier together with its measurement and testing in a real operation of receiving APT signals.
|
|
| |
|
|
Orientation Control of Satellite - Laboratory Experiment
Neužil, Ondřej ; Baran, Ondřej (referee) ; Urbanec, Tomáš (advisor)
This diploma thesis is about the basics of satellite systems, about their sorting, usage and technologies. An important part is the description of the principles controlling and stabilization of the small experimental CubeSat type satellites. The main point is the proposition and construction of the laboratory model of the CubeSat type satellite that should simulate the chosen methods of controlling and stabilization in laboratory conditions. The thesis describes the construction of the electronic parts of the model, the controlling software of the satellite’s processor and user software for easy controlling by PC.
|
|
|
Precise Frequency Generator - DDS
Kratochvíl, Petr ; Vágner, Petr (referee) ; Baran, Ondřej (advisor)
This work deals with frequency generators based on the direct digital synthesis method DDS. Basic principles and attributes of the frequency generator DDS are explained. The text describes parameters influencing and defining a quality of the generated signal. The list of available integrated circuits realizing the direct digital synthesis is mentioned. A construction of the DDS generator with a device AD9954 and the generator control are described. At the end of the work, the function and parameters of the designed generator are verified.
|
|
|
GPS Two-Stage Low Noise Amplifier
Šindler, Pavel ; Kasal, Miroslav (referee) ; Baran, Ondřej (advisor)
This work deals with a design of a low noise amplifier for the GPS band. The first part shortly describes properties of GPS signals and possible jamming sources. In the next chapter, basic parameters of low noise amplifiers, ways of the amplifier stability determination and stabilization are described. A summary of methods of a narrowband amplifier design follows. The next chapter contains a short description of filters usable in the designed amplifier. The next part deals with the design of the two-stage low noise amplifier with the help of Ansoft Designer software. The following part deals with the amplifier realization and its parameters measuring. At the end of this work, some experience with GPS signals reception with the realized low noise amplifier, a passive antenna and two different types of GPS receivers are mentioned.
|
|
|
VSAT Terminal Model
Kudlička, Miroslav ; Ondráš, Radek (referee) ; Baran, Ondřej (advisor)
This work deals with the description of the communication using the VSAT satellite network. A used network topology, frequency bands, satellite orbits and also an access technology are defined. The next part is focused on the VSAT terminal, where the block diagram is shown. A model of the indoor unit IDU is designed in the system background of Ansoft Designer. Individual parts of the system model are analyzed in terms of input variables. The results of the simulation are shown. The curves of BER before Viterbi decoding and after Viterbi decoding are shown too.
|
|
| |
|
|
Doble-balanced mixer - laboratory equipment
Dušek, Libor ; Baran, Ondřej (referee) ; Vágner, Petr (advisor)
The aim of this work was double-balanced mixer implementation, which will be used like laboratory equipment. This thesis deals with design of the double-balanced mixer from first theoretical principles to a practical design of a laboratory equipment. For the practical design the integrated mixer SA612 was used. Input signal to the mixer up to 500 MHz frequency can be used. For required operation external oscillator and fifth-order low pass filter were constructed. Oscillator was designed for fixed frequency 32 MHz. Fifth-order low pass filter was inserted between the mixer and the oscillator, because of filtering higher harmonics. The second aim of the work was measuring double-balanced mixer basic parameters, such as Compression Point (P-1dB) and Intercept Point (IP3). For the IP3 measurement, another one device was required. It consists of the power combiner for mixing two frequency close signals and third-order bandpass filter, which selects required frequency band. Finally, the laboratory equipment was fabricated and its real parameters were measured.
|
|
|
Antenna a LNA for multiband GNSS receiver
Ondráš, Michal ; Baran, Ondřej (referee) ; Záplata, Filip (advisor)
This project describesa microwave antenna for GNSS and low noise amplifier. Mikrostrip antenna is a modern type of antenna. This mikrostrip antenna is Dual – band antenna with circual polarization. The thesis describes how to make anantenna, what a circular polarization is, whata patch antenna is and what GNSS is. Low noise amplifier amplifies the antenna output signal.
|
guest ::
RSS feed.