|
|
Low Cycle and High Cycle Fatigue Properties of Austempered Ductile Iron
Zapletal, Josef ; Věchet, Stanislav (advisor)
The thesis is focused on assessment of fatigue behaviour of austempered ductile iron with nodular graphite. Optimal period of transformation was determined based on the best combination of stress and strain characteristics established by tensile test. Cyclic response and low-cycle fatigue life were studied under both stress-control and longitudinal strain-control mode at room temperature. For both modes, shapes of cyclic hardening curves are dependent on stress amplitude. Cyclic deformation curves (CDC) were fitted by power regression function. Results were compared with CDC established by multiple step test in both modes with verification of the influence of cyclic creep (high stress levels, stress-control mode). Experimental data of S-N curves are in agreement with the Manson-Coffin and the Basquin law. Fatigue and cyclic parameters were compared. Fatigue life time in high-cycle fatigue region was determined. Experimental data were fitted by suitable regression functions. Regression parameters and fatigue limit were established by means of each regression function. Experimental data in low- and high-cycle fatigue regions were used to construct S-N curve and to determine relevant parameters. Discontinuity of experimental data was not observed. Low-cycle fatigue behaviour was predicted. Approximation of tolerance bands was realized in high-cycle and both high and low cycle fatigue regions.
|
|
|
Low Cycle and High Cycle Fatigue Properties of Austempered Ductile Iron
Zapletal, Josef ; Bokůvka, Otakar (referee) ; Kunz, Ludvík (referee) ; Věchet, Stanislav (advisor)
The thesis is focused on assessment of fatigue behaviour of austempered ductile iron with nodular graphite. Optimal period of transformation was determined based on the best combination of stress and strain characteristics established by tensile test. Cyclic response and low-cycle fatigue life were studied under both stress-control and longitudinal strain-control mode at room temperature. For both modes, shapes of cyclic hardening curves are dependent on stress amplitude. Cyclic deformation curves (CDC) were fitted by power regression function. Results were compared with CDC established by multiple step test in both modes with verification of the influence of cyclic creep (high stress levels, stress-control mode). Experimental data of S-N curves are in agreement with the Manson-Coffin and the Basquin law. Fatigue and cyclic parameters were compared. Fatigue life time in high-cycle fatigue region was determined. Experimental data were fitted by suitable regression functions. Regression parameters and fatigue limit were established by means of each regression function. Experimental data in low- and high-cycle fatigue regions were used to construct S-N curve and to determine relevant parameters. Discontinuity of experimental data was not observed. Low-cycle fatigue behaviour was predicted. Approximation of tolerance bands was realized in high-cycle and both high and low cycle fatigue regions.
|
|
|
Optimization of Manufacturing and Assembling Technology of the Valve Bolt
Hrouzková, Andrea ; Zapletal, Josef (referee) ; Doležal, Pavel (advisor)
The thesis aimed to study the impact of manufacturing and assembly technology, the valve bolt fitted to diesel high pressure pump CP3 in the Bosch, which has been found to leak. As experimental material was chosen heat treated bolts M16x1,5 made of material 12 050th. Groups of samples were produced in two ranges hardness. Experimental determination of the optimum range of hardness was assessed on the basis of the results of the process of the screw and set the value of plastic deformation of the sealing surfaces of the parts. Experimental section also deals with the analysis of bearing surfaces on the pump and the components, after the screw process. To some extent, is observed as surface treatment
|
|
| |
|
|
Mechanical and structural characteristics of magnesium alloys reinforced with ceramic fibers
Halmazňa, Jiří ; Moravčík, Igor (referee) ; Zapletal, Josef (advisor)
This bachelor thesis deals the study of the mechanical properties of the alloy QE22 reinforced with SiC particles and Saffil fibers. This composite was produced by infiltration particles shape of the preform with molten matrix under high pressure. Test specimens prepared from the composite and the matrix were subjected to a tension strength test and compression test. The test results show pronounced asymmetry behavior in tension and compression of the matrix and composite. Adding the reinforcement into base material leads to significant increase of elastic modul, breaking strength and yield strength while reducing plastic properties. At the end of work was the behavior of the composite compared with the theoretical composite models.
|
|
| |
|
| |
|
| |
|
|
Fracture Toughness of Metallic Materials and its Testing
Kosek, Lukáš ; Zapletal, Josef (referee) ; Němec, Karel (advisor)
The purpose of the work is to introduce the basic of the fracture toughness of metallic materials and its measuring under the conditions of the plane strain. There are shown essential concepts of the linear elastic fracture mechanics, which is used for the description of the material behavior at fracture of the material with a crack. It defines stress intensity factor and describes the main elements influencing the fracture toughness. Furthermore, the work contains the particular testing methods, specimens and testing equipments. In the conclusion it recapitulates the availability and the application of the linear elastic fracture mechanics.
|
|
|
Toughness of Metallic Materials and its Testing
Michalisko, Jan ; Zapletal, Josef (referee) ; Němec, Karel (advisor)
This bachelor work deals with toughness as a mechanical property of metal materials. It defines the toughness and its demonstrations. It describes the transient behaviour of some metals at the static and dynamic load. Furthermore, the work describes the particular testing methods (Charpy‘s, Izod‘s, DWT, DT, DWTT). It covers the historical consequences of toughness testing.
|
guest ::
RSS feed.