|
|
Soldering gun with Li-Ion battery supply
Bartoš, Miroslav ; Vorel, Pavel (referee) ; Martiš, Jan (advisor)
This master‘s thesis deals with the design of battery powered soldering iron. The soldering iron will be placed in the plastic box from a conventional transformer soldering iron. First, we need to find the parameters of the original transformer soldering iron. Then design a synchronous step-down converter, driver of converter, BMS circuits, and component placement in a plastic box. The battery-powered soldering iron was successfully revived and tested, the final parameters of the converter are: voltage 0.4 V at 80 A current. The total power on the soldering wire is 32 W. Technically, this is a very interesting alternative to the classic version of the soldering iron, which can be used for assembly or repairs in poorly accessible locations.
|
|
|
Portable source for induction heating
Nevřela, Tomáš ; Martiš, Jan (referee) ; Knobloch, Jan (advisor)
The aim of this work is to realize and test a prototype portable source for induction heating of small parts. The project contains a theoretical basis of resonant circuits and induction heating. The device design is based on simulation results from the FEMM program, with which a focussing coil for induction heating has been designed. The parts of the thesis are the realization of the designed device, its putting into operation and the programming of the control.
|
|
|
Proposal for Marketing Tools of Specific Company
Floriánová, Aneta ; Martiš, Jan (referee) ; Mráček, Pavel (advisor)
The bachelor thesis is focused on analysis of Marketing mix at the company MSD, spol. s. r. o. which is engaged in the sale and servicing of office equipment, printing and copying services also. I will analyse current marketing situation of the commpany and on the basis of longterm observations, I will suggest marketing arrangements that will lead to the acquisition of potential new customers and a consequent improvement in profits of the company.
|
|
| |
|
| |
|
|
Controllable switching power supply 0-1000 V / 100 W
Hofmann, Oldřich ; Procházka, Petr (referee) ; Martiš, Jan (advisor)
The thesis deals with the design and construction of a switching power supply with output voltage adjustable from 0 to 1200 V and rated power of 120 W, which will be used to replace the existing high voltage power supply for the irreversible electroporation (IRE) device developed at UVEE FEEC BUT. The thesis focuses on a basic description of the IRE device, a description of usable converter topologies and a selection of the best topology for the required purpose. The selection of the control circuit concept and its design are also integral parts of the thesis. The final part of the thesis contains the assembly of the power supply and the measurement verifying its function.
|
|
|
Device for magnetic mixing of solution containing magnetizable particles
Zítka, Jan ; Martiš, Jan (referee) ; Červinka, Dalibor (advisor)
The aim of this works was the design and construction of a device that will be used for magnetizable beads mixing without application of mechanical force. In theoretical part of this work, properties of ferromagnetic nano- and microbeads and methods used for mixing of these beads were described. Two coils were reeled in for the device, each consisting of 200 turns and with 0.8 . The device construction was designed in program CAD. Different parts of the instrument were 3D printed. The control program, which enables changes in coil switching, was created and then the testing of device functionality was performed.
|
|
|
MIG/MAG welder with switching power supply
Klejma, Michael ; Červinka, Dalibor (referee) ; Martiš, Jan (advisor)
This diploma thesis deals with design of welding power supply for MIG / MAG and MMA technique with continuous output current 120 A. The first, theoretical part is devoted to welding process technology, physical characteristics of electric arc and description of individual welding methods. The thesis also deals with the concept of power converter. The design of the switched-mode power supply is based on a full bridge topology. In order to implement advanced controls of welding power supply, the ARM Cortex M4 microprocessor was selected. Due to the large power consumption of the stepper motor for drive the welding wire, an auxiliary switched-mode power supply was also implemented. The documentation describing the realization of the welding power supply and the results of the measurements are in the last part of the thesis. The welding power supply was successfully revived and reached nominal parameters. Inert gas welding has not been tested yet, due to lack of time caused by extensive work in order to complete mechanical realization.
|
|
|
Plasma speaker - audio modulated electric arc
Klein, Ondřej ; Červinka, Dalibor (referee) ; Martiš, Jan (advisor)
The bachelor thesis deals with design and realization of electric arc modulated by audio signal. It is also known as plasma speaker. Absence of any mechanical components gives membranless speaker no frequency limitation. The design consist of single circuits as power sources for power and control section, control electronics, which modulates the signal, and power section, which reproduce signal in form of sound.
|
|
|
High voltage power supply for dielectric strength
Klejma, Michael ; Červinka, Dalibor (referee) ; Martiš, Jan (advisor)
This thesis deals with a choice of proper solution of high votlage source with regulated DC output in range of 0 – 50 kV. Source will be used for testing of electrical insulators, with function of displaying voltage at which breakdown of the insulator occured. Due to low output current up to 1 mA it is possible to use a cascade voltage multiplier as suitable solution. The voltage multiplier is powered by switching-mode power supply with high voltage pulse transformer. The inverter uses single-acting innovative topology that enables a supply of alternating current to the voltage multiplier. This solution is simple, but an analysis of operation is difficult, as will be described in details in this thesis. Realization and testing of the source has been successfully done, but the source had problems with its own EMC. After debugging, requested parameters have been achieved.
|
guest ::
RSS feed.