|
|
Model of physical layer of communication system IEEE 802.11ah
Jurák, Petr ; Staněk, Miroslav (referee) ; Polák, Ladislav (advisor)
This diploma thesis deals with the analysis of the IEEE 802.11ah wireless communication system. For such a purpose, an appropriate simulation model in program environment MATLAB is created. The first part of thesis focuses on the IEEE 802.11 standard. Basic blocks of the transmitter and receiver are described. Attention is also devoted on the brief description of considered transmission channels. The second part contains the description of the proposed and realized simulation model in MATLAB. Individual blocks of the simulation model are described in details. Finally, the obtained simulation results are evaluated and discussed.
|
|
|
Simulation of the DVB-C and DVB-C2 transmission and their comparison
Cibulka, Tomáš ; Hüttl, Ondřej (referee) ; Polák, Ladislav (advisor)
This Master thesis deals with description, analysis and simulation of standards of digital video broadcasting DVB-C and DVB-C2. There is described mainly the transmission system, channel coding, type of modulation and OFDM symbols generation. Furthermore, channel models, used for the exploring of their performances are described too. There was created an application with a graphical interface in MATLAB, which simulates transmission in DVB-C2. Based on simulations there are compared influences of each settings on bit error rate of data transmission for both standards. Finally, obtained simulation results are compared with theoretical values.
|
|
|
Laboratory workplace for measuring performances of DVB-T2/T2-Lite
Youssefová, Kristina ; Kratochvíl, Tomáš (referee) ; Polák, Ladislav (advisor)
Tato práce se zaměřuje na zkoumání vlastností standardu pro digitální televizní vysílání přes pozemní vysílače (DVB-T2). Dělí na tři hlavní části. V první části je prozkoumán řetězec signálového zpracování DVB-T2. Ohled je rovněž brán na možný nepoměr I/Q v modulátoru OFDM. V druhé části je navrhnuté laboratorní měřící pracoviště pro měření vlastností systému DVB-T2. Ve třetí části je ověřena správnost navrhnutého postupu pomocí rozsáhlých experimentálních měření. Součástí této práce byl návrh laboratorní úlohy, která se zabývá měřením různých přenosových scénářů DVB-T2.
|
|
|
Design of class AB stereo audio power amplifier
Zatloukal, Tomáš ; Polák, Ladislav (referee) ; Brančík, Lubomír (advisor)
The following work deals with design of class AB low-frequency amplifier, which is appropriately supplemented by correction Pre-amplifier and inrush protection circuit. The original schematic from prof. Leach was edited to fulfill task and to be easily completed from discrete components. The result of this work is the final design of power amplifier and correction pre-amplifier, protection circuit for speakers and power supply. As a next part, the design of printed circuit boards will be described together with assembling and mounting of boards in a construction box. Power amplifier will be verified by simulation and hardware measurements.
|
|
|
Simulation of multipah propagation of multistate modulations
Polák, Ladislav ; Pust, Radim (referee) ; Šebela, Radek (advisor)
The diploma thesis Simulation of Multipath Propagation of Multistate Modulations is focused on the development of an appropriate algorithm in MATLAB environment, which is capable to simulate the impact of the multipath propagation on received signal (error rate) on the basis of given parameters of the transmission channels. Mechanisms and characteristics of the wave propagation in communication environment, types of digital modulations and their most important parameters are described in the first part of this thesis. The second part is focused on the simulation itself. Created GUI (Graphical User Interface) is able to display constellation diagrams of transmitted and received signals, as well as their bit error rate. It is also possible to compare these data with the data of signal, which is passed by a non-fading channel.
|
|
|
Simulation of the RF transmission channel for the DVB-T2
Strouhal, Adam ; Hüttl, Ondřej (referee) ; Polák, Ladislav (advisor)
This Master thesis is focused on detailed description of the DVB-T2 system. This work deals with the description of the particular parts of models and with typical RF transmission channels for fixed and mobile reception. In order to simulate the impact of the fading transmission channels on the transmitted signal there was developed an appropriate application in MATLAB. The graphic user interface of this application allows set the transmission parameters of DVB-T2 and the parameters of the transmission channels. Results of simulations with various settings are evaluated and compared with the results, obtained from the DVB-T measurements.
|
|
|
Subjective quality evaluation of video sequences
Krmela, Tomáš ; Fliegel, Karel (referee) ; Polák, Ladislav (advisor)
This master´s work is focused on the comparison of subjective assessment of the quality of video sequences. In this study, data are obtained by hardware and sofware techniques and they are compared. In the introduction, methods of video compressions are described. The main part of this work deals wtih the exploring of different methods of subjective assessment of the quality of video sequences. Finally, obtained results from different methods, are evaluated and discussed.
|
|
|
RTL-SDR and its application in teaching of wireless communications
Dubina, Tomáš ; Polák, Ladislav (referee) ; Miloš, Jiří (advisor)
This bachelor thesis deals with the using of RTL-SDR dongle in wireless communication teaching. The first part discusses the SDR function and describes the properties of RTL-SDR. The second part deals with the communication chain and digital modulations. The last part describes the created mathematical model of the communication system and the concept of laboratory tasks. In the appendix there is one demonstration task suitable for teaching, including solutions.
|
|
|
A Framework for generating Traffic in IoT Networks
Švehla, Ľubomír ; Staněk, Miroslav (referee) ; Polák, Ladislav (advisor)
The point of this master's thesis is to design a framework capable of receiving and processing and also generating and sending packets of BLE, Z-Wave and IQRF technologies. In addition to designing the software itself, it also deals with choosing suitable hardware. Selected hardware is SDR device HackRF~One. The software solution is implemented in C ++ and counts on the use of third-party tools.
|
|
|
Assessing Selected Indicators of a Company Using Statistical Methods
Polák, Lukáš ; Raiskupová, Alena (referee) ; Doubravský, Karel (advisor)
The subject of this bachelor thesis is to evaluate the financial situation of the company using selected financial indicators and subsequent clearance of data using statistical methods. The work is divided into theoretical part, which is focused on the financial analysis and time series issues. Furthermore, the practical part, which is used theoretical and given all the calculations. As the last part of the design, which deals with the practical part of the evaluation and subsequent suggestions for improvement or action in problematic indicators.
|
guest ::
RSS feed.