|
|
The Commercial-Administrative Centre in Ostrava
Vdovina, Mariia ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
This diploma thesis deals with the project documentation of a new building of a commercial-administrative center in Ostrava. The building has a partial basement, the maximum number of floors above the ground is 3. The building contains several categories of areas. The largest of them are office space and restaurant area. The total number of employees of the center is 73, including 63 administrative staff and 10 people serving the restaurant. The building also houses sanitary facilities, areas for rest, food preparation, meeting rooms, storage areas and filing cabinets, rooms for technical equipment. The building has a skeletal frame system made of monolithic concrete. Perimeter masonry and interior walls are made of Porotherm bricks. The building is covered with a general and vegetation flat roof. The facade of the building is ventilated, clad with titanium-zinc panels DEKCASSETTE and DEKLAMELLA IDEAL. The building is insulated with ETICS contact system, thermal insulation boards made of mineral felt. The diploma thesis is processed in the stage of project documentation for the construction.
|
|
|
Civic amenities building
Matulíková, Monika ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of this master thesis is to design a new building of a nursing home with private garden and car park in Kroměříž. It is a two-storey building, without basement covered with a flat green roof with solar and photovoltaic panels. The building is divided in two parts. The southern part includes residential units (10 single units and 4 double units). The ground floor of the northern part includes dining room, a kitchen, staff premises and utility room and first floor includes further staff premises. Both parts are connected by a hall with stairs and an elevator. The vertical load-bearing structures are designed from sand-lime blocks. The horizontal load-bearing structures, stairway and elevator shaft are designed from cast-in-place reinforced concrete. The envelope is insulated with mineral wool. The building will be heated and cooled with a heat pump. It will also have a mechanical ventilation system with heat and cold recovery and root zone greywater treatment plant. The thesis is carried out in Autodesk Revit 2020, Autodesk AutoCAD, Lumion and DEKSOFT software. All structures comply with the valid standards and regulations.
|
|
|
Civic amenities building
Netopilíková, Markéta ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of master‘s project is to design a new building of the office building in the cadastre area of Rohatec. The project is divided into three parts. The first part deals with the design of environment friendly and sustainable building. The second part is focused on the design of building services and the processing of building energy services. The third part is focused on the modeling of the noise study, the assessment of the soundproofing of the external cladding and the assessment of the reverberation time.
|
|
|
Boarding House Mikulov
Smolinský, Patrik ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The content of this diploma thesis is the design of a new boarding house with restaurant in Mikulov. The building has 2 above – ground floors and a partial basement. In the basement is utility room and fitness room. In 1st floor there is reception, restaurant with facilities and rooms for accomodation. One room is designed as a berrier – free. In the 2nd floor there are rooms for accomodation, facilities for cleaning and common room. The vertical supporting structures are designed from clay masonry, in the basement of the concrete formwork. The building will be covered partly by flat roof, hip roof and partly by vegetation roof. The design documentation has been prepared according to valid legal and technical regulations.
|
|
|
Mixed-use Building in Brno
Nečesaný, Jiří ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
Seminar work solves project documentation of new-build multifunctional house on the street Generála Píky, Brno-Černá Pole. The building is designed as a four-storey partially basement. On the first floor there will be two commercial units, technical background of the house and storage space for apartments. The second floor will be used for administrative purposes. The third and fourth floors will be used for residential purposes. There are 6 cellars in the basement. The building is designed as barrier-free. Parking of vehicles is designed in the courtyard. On the 4th floor there is an exit to the roof of the building.
|
|
|
Object of civic amenities
Hasoň, Václav ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The diploma thesis elaborates on the design of a new building of freestanding retirement home in the town of Litomyšl. The design of the retirement home is in the form of project documentation for the construction. The new building includes a partial basement and three floors. The main purpose is to build a building for housing with flats for seniors and to provide health care to seniors living here and from the surrounding area. On the 1st floor, there is an administrative part, a doctor's office with the possibility of rehabilitation and a dining room with facilities for food preparation, which is imported into the home. The dining room serves both the guests and the public. The remaining part of the first floor consists of social, administrative and utility rooms. On the 2nd and 3rd floors, there are individual apartments for clients with a common room for visits and spending their free time. On the 1st floor, there is a maintenance center, boiler room, server room, furniture store, and estate depository. Basement walls are monolithic, made of reinforced concrete. The construction system of the above-ground floors is wall-mounted, bidirectional and made of ground brick blocks. The ceilings and staircases are monolithic, made of reinforced concrete. External walls are insulated with a contact thermal insulation systems. The building is mainly based on footings or foot anchors. The retirement home is located on the edge of the town near the Litomyšl Hospital. The land is suitable for construction, as it is located in the area for the construction of civil buildings.
|
|
|
The facilities
Kopecký, Tomáš ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
This diploma thesis presents processing of the design documentation for public service building. The scope of this work is in accordance with ordinance 499/2006 and latter amended 62/2013. There is a small brewery in the building, as well as a pub, tourist apartments and the owner's flat. Building is situated in Vranová, Blansko district. It is a three-story building without basement, roofed with flat and mono-pitched roofs. The ground floor consists of a pub, a brewery and a communication wing dividing the building in the middle. The second floor consists of hostel type tourist apartments with shared facilities. The third floor belongs exclusively to the owner of the building who has an apartment there. The building is bricked, complemented by an external thermal insulation composite system (ETICS). Floor structure consists of SPIROLL panels. Design documentation was developed in AutoCAD software.
|
|
|
Boarding House and Cafe "Na Fügnerce"
Kaňková, Ivana ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The diploma thesis deals with the elaboration of project documentation for the new building Boarding houseand Café "Na Fügnerce", including the required assessments according to the assignment of the diploma thesis. These are two proposed blocks of buildings, a three-storey other basement and a two-storey non-basement, both of which are interconnected by a steel connecting footbridge and a roofed part with a single-skin vegetation roof. The proposal itself is an interesting team because its land is in the spa town of Podebrady, in the very heart of this town. The task was, not only to fit into the current gap formed after the demolition of family houses, but also the architectural design of similar buildings so that they fit into the surrounding buildings. In the surroundings, the architecture of functionalist buildings is combined with the historicism of residential or multifunctional buildings, as well as buildings of industrial and Art Nouveau elements of urban furniture. The proposed capacity of the buildings is 18 beds (the proposal was considered with the stay of people with limited mobility and orientation), the cafe has 44 seats and a meeting room is designed for 22 people (this space can be presented by a mobile partition). The premises are always designed with a separate hygienic background. The construction system of the buildings is designed as a longitudinal wall with a reinforcing staircase core, the load-bearing masonry is designed primarily from sand-lime perforated blocks. The ceiling structure is designed as a reinforced concrete monolithic.
|
|
|
Cultural-reference centre of Trenčín
Sládok, Marcel ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The title of this master´s thesis is the elaboration of a design for a newly builded building of civil importance - a cultural center. Object is 3 storey, situated on the flat plot in the wider center of Trencin. The center includes a concert hall and facilities for training and recording musical productions. The concert hall forms the left part of the building and consists of a stage, adjacent auditoriums with 352 seats, communication spaces and backgrounds for needs of performance. On the right side there are facilities for testing and recording of music with its own facilities, an entrance hall with a café and a seating area. The construction system consists of a monolithic vertical and horizontal RC structure, complemented in a concert hall with a beam ceiling. The roof is flat in 2 levels, the facade and the envelope of the building is a combination of glass facade and the ETICS insulation system, the highest part of the building is created by cetris tiles. Drawing part is drawn in AutoCAD, other programs used (eg to calculate physical properties of structures etc.) are DEKsoft, WDLS.
|
|
|
Mountain hotel
Vlček, Jan ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of this diploma thesis is to design a mountain hotel in the village Rokytnice nad Jizernou. The object is placed on a sloping plot located in an attractive touristic and skiing area of mountain range Krkonoše. The mountain hotel has 4 floors and a basement. In the First floor there is a restaurant with a terrace, kitchen and administrative facilities of hotel. In the second and third floor we can find guest rooms and room for the hotel staff. In the basement there is wellness, technical facilities and garage compound. Construction of building is made of the reinforced concrete monolithic transverse frames with beam filling of ceramic block.
|
guest ::
