|
|
Quality of PCB Surface Finishes and Test Coupon Optimization
Minář, Jan ; Přikryl, Tomáš (referee) ; Starý, Jiří (advisor)
This master’s thesis deals with measuring and evaluation of wetting for samples of different surface finishes, using a test coupon developed in cooperation with firm Gatema. It deals with surface finishes ENIG and immersion tin. For these samples deals with quality monitoring and periodic testing of these surface finishes. The solder using for tests is SAC305. Test methods are used for simulation of reflow soldering and wave soldering.
|
|
|
QFN Packages Soldering and Technology Procedures
Jakub, Miroslav ; Brno, Petr Martinec, HONEYWELL (referee) ; Starý, Jiří (advisor)
This master´s thesis deals with QFN packages soldering and technology procedures optimization. The aim of theoretical part is description of QFN packages, their assembly and reflow soldering on PCB in HONEYWELL. The aim of the practical part is to propose a method of measuring temperature and optimizing the thermal profiles of selected PCB with QFN packages by using convection (HONEYWELL) and infrared (BUT) reflow ovens. Comparison and evaluation of thermal profiles for 3 production PCBś with QFN packages using solder paste AIM NC257-2 were realised. The main part of master´s thesis are appearance evaluation of solder joints, preparing microsection and measuring intermetallic layers thickness by using the optical and the scanning electron microscopes, analysation and study of QFN defects created during soldering proces. These tests were performed with 2 production PCB´s. Optimization of SPI and soldering technology procedures where were analyzed QFN packages were processed on one type of PCB. Interesting part of this diplomma thesis is creating of the 3D heat transfer model of QFN package during the reflow soldering in SolidWorks.
|
|
|
Solder Joint Quality based on Heating Factor
Kučírek, Martin ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
Master’s thesis in the theoretical part analyses the heating factor (Q), which has significant share on quality of a solder joint. The practical part describes the design and production of test PCB and setting temperature profiles, SMD resistors soldering by using BiSn solder paste. Shear tests of SMD solder joints were realised and evaluated including isothermal ageing samples. At the end of master’s thesis solder joints visual aspects and defects were evaluated, measurement thickness of intermetallic compound by not only optical microscope but also SEM, discussion about results and Q was evaluated.
|
|
|
IoT Manual Soldering Station and Technology Aspects
Němec, Ivo ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
This thesis explores the Internet of Things, its applicability in soldering stations and its possible benefits in terms of quality control of the manual soldering process. The thesis summarizes the basic description of IoT, its historical development, possible threats and today's implementation in various devices. Furthermore, the principle of soldering stations and the IoT features implemented in them are described. Last but not least, possible benefits of IoT applicability in soldering stations are presented, such as services to make the manual soldering process more traceable and controllable.
|
|
|
Organic semoconductors materials
Černošek, Michal ; Starý, Jiří (referee) ; Špinka, Jiří (advisor)
This bachelor thesis deals with organic materials and parts made of this materials. Described are also principels of their functions, structure of whore part and issues linked with production. Next are refered advanteges and disadvantages of those parts. Described are also events which occures during using organic parts. Attention is given to light emitting diods. In experimental part is measured electrical attriburtes of PLED structures, exposed to different sources of illumination. Influence of illumination to transfer of electrical charge is examined too
|
|
| |
|
|
Dielectric properties of liquid insulators
Jahn, Michal ; Starý, Jiří (referee) ; Špinka, Jiří (advisor)
This master‘s thesis deals with measurement of liquid dielectric materials (insulators). Above all, it is the different kinds of clean and drinking water, but also transformer oils. There was done theoretical information retrieval about the given topic in this project and on the basis of theory there were realized the relevant measurements of selected properties of liquid dielectric, such as permittivity, capacitance, loss number, conductivity, but also temperature dependence of these parameters. The measurements were realized with the help of product manufactured at the faculty FEKT VUT and with the help of measuring system AGILENT 16452A. The measured results were evaluated, graphically processed and compared.
|
|
|
Study of lead-free solder joints reliability
Pícha, Jan ; Starý, Jiří (referee) ; Szendiuch, Ivan (advisor)
The thesis deals with problems concerning lead free soldering especially the study of the structure of solder joints and their reliability. The thesis evaluates lead free solder alloys. The theoretical part includes basic principles of soldering and methods of investigating solder joints reliability. The experimental part deals with the impact of water cooling and vibration on solder joint structure. Both methods are tested and are evaluated with regard to their reliability. The used tests include X-ray inspection, optical inspection, mechanical tests, investigating joint structure with electrone microscope.
|
|
|
Solder Joint Reliability and Wetting Characteristics Influence
Labaj, Radek ; Stejskal, Petr (referee) ; Starý, Jiří (advisor)
This thesis deals with the methodology of testing the wetting characteristics for different material and process effects in the double-plated base material. Testing is performed by wetting balance method. There is designed procedure to calculate the angles on each side of the non-homogeneous material. The Design of Experiments method is used to interpret the results, by using this method are also interpreted electrical and mechanical properties of solder joints. The correlation with wetting characteristics is discussed.
|
|
|
Project prototype SMT line with application new technology
Hůrka, Radek ; Starý, Jiří (referee) ; Hanusová, Hana (advisor)
The general aim is the present proposal of technological machine surface mount line for small lot and prototype production. This project enables to expand production, application of new technology, increase of flexibility in companies which deals with prototype production. The practical part of this work give view on optimalization of leadfree process.
|
guest ::
RSS feed.