|
|
Magnetic properties of 42CrMo4 steel
Bulín, T. ; Švábenská, Eva ; Hapla, Miroslav ; Roupcová, Pavla ; Ondrušek, C. ; Schneeweiss, Oldřich
Low alloyed high-grade chrome-molybdenum ferritic steel was investigated from the point of views of magnetic properties in dependence on heat and mechanical treatment. This steel can be used as components of magnetic circuits or some parts in electrical equipment. The basic information on structure and phase composition was obtained by optical and scanning electron microscopy, X-ray Powder Diffraction and Mössbauer Spectroscopy. The temperature stability of the material was proved by measurements of temperature dependences of magnetic moment. The magnetic parameters were obtained by measuring of magnetic hysteresis loops in dependence on saturation field and their frequencies. The results are discussed from the point of view of possible applications as a magnetic material in the very extremely environment, where high mechanical stresses and elevated temperatures can occur.
|
|
| |
|
| |
|
|
INFLUENCE OF LASER CUTTING AND PUNCHING ON MAGNETIC PROPERTIES\nOF ELECTRICAL STEEL M470-50A
Bulín, Tomáš ; Švábenská, Eva ; Hapla, Miroslav ; Ondrůšek, Č. ; Schneeweiss, Oldřich
Electrical steel M470-50A belongs to the most often used materials in electrical machines. Due to this fact, it is desirable to know the magnetic parameters after processing raw sheets into the required shape. Basic parameters of mechanical, electrical, and magnetic properties of the sheets are usually obtained from the producer but the magnetic properties are changing in dependence on additional machining processes. The aim of this study is to describe changes in parameters of magnetic behavior after punching, laser and spark cutting of the original sheets. The basic information of structure was obtained by optical and scanning electron microscopy. The magnetic parameters were acquired from the measuring of magnetic hysteresis loops in dependence on saturation fields and frequencies. The results are discussed from the point of view of applied\ncutting technology with the aim to obtain the best magnetic parameters and consequently a higher efficiency of the final product. Results can be used as input parameters in simulation of the electrical machine.
|
|
|
Changes in structure and phase composition in the surface of tram rail
Švábenská, Eva ; Roupcová, Pavla ; Schneeweiss, Oldřich
We have investigated structure and phase composition of surface layer of tram rails after long time running and the results were compared with those obtained on the original part of material. Changes due to effects of severe plastic deformation together with thermal shocks by friction process were expected. The information about structure and phase composition was obtained by optical and scanning electron microscopy, X-Ray Powder Diffraction, Mössbauer Spectroscopy and Glow Discharge Emission Spectroscopy (GDOES) and this was completed by microhardness measurements. The results show that the surface layer in comparison with the original material exhibits important changes in grain structure, an increase in microhardness and high content of iron oxide and hydrooxides. According to the depth profile of the chemical composition measured by GDOES there is an increase in carbon content in the surface layer which can be effect of up-hill diffusion.
|
|
|
Selektivní růst kovových materiálů.
Šimíková, Michaela ; Schneeweiss, Oldřich (oponent) ; Čechal, Jan (vedoucí práce)
Diplomová práce pojednává o studiu selektivního růstu tenkých vrstev kobaltu na Si(111) s tenkou vrstvou oxidu křemičitého na mřížkách, které byly vytvořeny metodou fokusovaného iontového svazku, a o růstu a morfologii tenké vrstvy železa rostoucí na substrátu Si/SiO2 bez úpravy. Dále jsou zkoumány vrstvy a-C:H, vliv depozičních parametrů na jejich vlastnosti a poměr vazeb sp2 a sp3. Pro analýzu těchto vrstev jsou použity metody XPS, AFM a SEM.
|
|
|
Analysis of nanoparticles released from the car brakes
Švábenská, Eva ; Roupcová, Pavla ; Schneeweiss, Oldřich
Our research is focused on the phase, structure and chemical analysis of the powder particles released by braking of cars from their brake components – discs and pads. The basic information on structure and phase composition was obtained by X-Ray Powder Diffraction, Mössbauer Spectroscopy and scanning electron microscopy with EDX. The results of the particle analysis are compared with materials used for manufacturing brake components and with the powder prepared by ball milling of the mixture of the pad composite and disk steel. Most of recognized nanoparticles are based on carbon, silica/silicates and iron oxides. Their effects on street environment are mentioned.
|
|
|
Analysis of the surface layer of the brake disk
Švábenská, Eva ; Roupcová, Pavla ; Podstranská, Ivana ; Petr, M. ; Filip, J. ; Schneeweiss, Oldřich
Our research is focused on the changes in thin surface layer of the brake disk due to the impact of severe plastic deformation and heating by friction process. The aim of this study is to compare structure, chemical and phase compositions of the surface layer in depth up to several hundreds of nanometers in the no affected central part of brake disk and the part which was in contact with brake pads by braking. The basic information on structure and phase composition was obtained by optical and scanning electron microscopy, X-Ray Powder Diffraction and Mössbauer Spectroscopy. The thin surface layer was studied using Conversion Electron Mössbauer Spectroscopy and X-ray Photoelectron Spectroscopy. We explain the observed changes with the knowledge on effects of plastic deformation and/or diffusion of alloying elements in the material of the brake disk.
|
|
| |
|
|
Příprava Fe-Ti kompozitů mletím v kulovém mlýnku
Roupcová, Pavla ; Schneeweiss, Oldřich
The materials were prepared by mechanical alloying in the ball mill. The first type of sample consists of pure commercial precursors (TiH2 and ferrihydride). The slightly changes of phase composition of the powder were under the detection limit of X-ray powder diffraction. The MS determined the changes from the first step of milling. The second type of sample was prepared from turnings. The reduction of the splinters volume and the mechanical alloying was running simultaneously. The huge crystalline size differences decreased the credibility of computation of phase composition by XRD. MS was able determined phase composition more exactly and in additional to differentiate crystalline and amorphous FeTi phase.
|
host ::
RSS.