|
|
Thermal degradation of insulation materials from the cable industry
Kučera, Filip ; Krbal, Michal (referee) ; Pelikán, Luděk (advisor)
The aim of this bachelor thesis is to get acquainted with the properties and parameters of insulation materials of various types (PVC, PE). Measure these properties with a Tettex 2830/2831. Perform a theoretical analysis of the aging of insulating materials and propose a procedure for the formation of thermal degradation. Finally, find out how the properties of insulating materials, electrical strength and mechanical properties change due to thermal degradation.
|
|
| |
|
|
Issue Of Measuring Parameters Of Dielectric Materials
Pelikán, Luděk
This article deals with the problems arising in the electrical measurement of various dielectricmaterials used in power engineering. The article presents the basic quantities and theirmeasurement principles. It focuses mainly on parameters measurable in non-destructive measurements,such as volume resistivity, relative permittivity, and dissipation factor. The article draws attentionto the problems that may arise during the measurement and thus guides the reader on howto measure these parameters correctly. These problems and findings were gathered during severaldifferent measurements with different types of dielectrics.
|
|
|
Breakdown Voltage Measurement of Solid and Liquid Dielektric Materials
Ryšavý, Tomáš ; Pelikán, Luděk (referee) ; Krbal, Michal (advisor)
This thesis aims to theoretically describe the formation of electric breakdown in solid and liquid dielectric materials and subsequently focuses on the measuring itself. In addition to describing the standardized procedure of electrical breakdown or breakdown voltage of dielectric materials, this paper also focuses on the most important parameters and conditions that affect the electric strength of materials. This thesis also includes designs of electrode systems and test chambers for measuring solid and liquid dielectrics.
|
|
|
Testing of MV Distribution Transformers
Czajtányi, Róbert ; Pelikán, Luděk (referee) ; Krbal, Michal (advisor)
The aim of this thesis was to get acquainted with the electrical properties of distribution transformers, which are used in the area of high voltage technology. Further aim was to describe the existing diagnostic methods according to the standards and to introduce the measuring workstation. Finally, the diagnostic of transformer was performed, and the results were evaluated.
|
|
|
Generation of Voltage Wave by Impulse Generator
Poloni, Miroslav ; Krbal, Michal (referee) ; Pelikán, Luděk (advisor)
The presented bachelor thesis deals with the problems and functions of impulse voltage generators. The theoretical part describes the functions and various connections of the impulse generator, types of impulse voltage, tests and test procedures. In the practical part of the work, theoretical knowledge in the form of simulations was verified. The simulations were performed in the LTspice program from Linear Technology, where the impulse generator model was made. Simulations were then performed on the given model of the shock generator, from simpler ones such as the dependence of the size of the load capacity to the inductance connected in parallel. The results of all simulations should bring benefits and ease in real shock generator tests
|
|
|
Dielectric Absorption of Electroinsulating Materials
Pavlinský, Branislav ; Krbal, Michal (referee) ; Pelikán, Luděk (advisor)
This bachelor thesis deals with the basic physical principles of dielectrics as well as the description of the phenomenon of dielectric absorption. The work presents diagnostic methods that use this phenomenon, based on the events taking place in the dielectric after the connection of DC voltage. Furthermore, the work deals with diagnostic methods for determining the state of insulation of various high-voltage electrical equipment. The work also deals with the properties and parameters of electrical insulating materials - specifically polymers. We obtain these parameters using the mentioned diagnostic methods. By knowing these parameters, we achieve enough information about the insulation to determine its condition and prevent possible damage.
|
|
|
Surge arresters, their construction and use in power system
Novický, Marek ; Pelikán, Luděk (referee) ; Orságová, Jaroslava (advisor)
The bachelor thesis deals with the means used to protect the equipment from the effects of overvoltage. The first of the thesis outlines basic information regarding the used overvoltage protections in the distribution system. The thesis also features the practical part outlining measurements carried out on the surge arrester. The last chapter deals with the dimensioning of the surge arrester in the high voltage distribution system.
|
|
| |
|
|
Measurement of HV equipments by electronic bridge.
Kumičák, Ivan ; Pelikán, Luděk (referee) ; Krbal, Michal (advisor)
The main idea of this thesis is measurements of dielectric materials by using a device Tettex. The thesis is about basic physic properties of dielectric materials. The determination of a dielectric material is considered. The behavior of these materials in electrical fields and reasons, those can have an influence on it, are considered as well. In the text are described measuring methods of chosen parameters of dielectric materials by device Tettex and its functional principles. There are an evaluation of measurements, which were done, and a discussion about achieved results.
|
guest ::
RSS feed.