|
|
Switched power source for electroplating
Janků, Roman ; Minárik, Vladimír (referee) ; Červinka, Dalibor (advisor)
The thesis deals with the switching source for electroplating. The theoretical principles of galvanizing, the optimal technological process and a list of most commonly used metals are described. There is also a list of well-known producers, and a description of their resources for electroplating, which have the same output parameters. In the second part of the work there is an introduction of the already-completed school source 2000A/20V, major technical imperfections is solved there. There is also proposition of technical layout made in 3D AutoCAD. Finally, there is an economic analysis of the production costs of the source and a research in suitable suppliers of components and materials. The thesis contains an estimate of the selling and total price compared with competition.
|
|
|
The high current pulse inverter
Cejpek, Miroslav ; Vorel, Pavel (referee) ; Červinka, Dalibor (advisor)
This work is devoted to welding, different types of welders and their principle, efficiency and welding using an inverter. The main responsibility of the bachelor project is design of switched welding source. Thanks to the welder as a switched power supply operating at a frequency up to 60kHz welding machine can be realize with very small footprint. The proposal involves the following parameters: Current range 55A – 135A Voltage range 13V – 36V Out voltage 80V Critical current 25A
|
|
|
Control of excitation of synchronous generator
Horník, Vincenc ; Červinka, Dalibor (referee) ; Huták, Petr (advisor)
The main focus of the work is to create the optimal design of the reconstruction of synchronous generator excitation system of small hydro power plants with regard to the economical and technical performance, description of synchronous generator excitation, possible technical solutions to the reconstruction of excitation systems and their driving.
|
|
|
Charger for lead-acid accumulators 12V with the aditional fuction "start-car"
Benada, Tomáš ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
This thesis is engineering design of the intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR". It contains calculations of each component. The switching power supply is the mainstay of the charger that makes the charger small, lightweight and portable. The Intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR“ charges the accumulator by method of constant voltage with current limitation of 0,5A, 5A, 20A, 50A. 50A current is used in winter during starting of a car, when the battery can´t provide sufficient current. The device comprises safety protection for the charger, supply network and battery. There are three LEDs placed on the front side of the charger reflecting status of the device.
|
|
|
Three-phase sinusoidal pulse width modulation algorithms
Rudolf, Ladislav ; Červinka, Dalibor (referee) ; Klíma, Bohumil (advisor)
The main theme of this bachelors‘s thesis is to introduce readers into the algorithm of generating three-phase sinusoidal pulse width modulation. Main attention is concentrating to methods of generating Pulse width modulation method such as comparate PWM modulation technique and space modulation of voltage vector SVM. The functional units of algorithms are analysed and described from the basics. In addition, this project describes the basic analog solutions and even the implementation of the PWM modulator into signal processors DSP56F800.
|
|
|
Asynchronous dynamometer - power inverter
Vetiška, Vojtěch ; Červinka, Dalibor (referee) ; Klíma, Bohumil (advisor)
This project deals with the power converter for the asynchronous dynamometer. Inside of the document we shall acquaint with claims towards switching transistors and actuators. Furthermore we shall go through the principle and the wiring of three-phase converters and active rectifiers . We specify particular conditions of parameters for the power converter. For these conditions we shall dimension particular elements of the power converter. On the end we shall design the mechanical arrangement of the power circuit and create the design documentation..
|
|
| |
|
|
Electric bike with a combustion-engine-powered generator
Mička, Dominik ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
A conceptual design and realization of a motor bike using combustion engine and electrical power transfer is the objective of this master´s thesis. Control strategy that allows combustion engine to reach maximal efficiency cooperating with wide range speed and torque operating area electromotor was created. All function blocks were realized. Also hardware of all needed parts was developed. The last part was a design and debugging of control software. Finally the functionality was documented by test drives and measurements.
|
|
|
Drive design for Foil Winding Machine
Koncer, Adam ; Červinka, Dalibor (referee) ; Klíma, Bohumil (advisor)
Master’s thesis deals with the realization of motion drives for the foil winding machine. Drives for this machine are supplied by company Siemens. Whole project is made in cooperation with that company. The reader gets a comprehensive overview of the product group SINAMICS that will be used for the realization of drives in this machine. Thesis describes the selection of individual drive components, their control and regulation. Measurement and evaluation of results foil winding machine is made in the last chapter of this thesis.
|
|
|
DC/DC step-up converter for notebook
Škunda, Michal ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
Given bachelor’s thesis devoted to a proposal and implementation of transducer STEP-UP for supplying of notebook in car. Introduction presents dividing of switching power supplies followed by a choice and a proposal of power supply. In this work we can find the specific proposal of inductor, the proposal of electronic connexion and the proposal of PCB layout. There is a software EAGLE used for the design of PCB layout. In the last part of work there are particular courses of current and voltage that characterize power supply pictured. The work contains measured load characteristic of switching power supply loaded by notebook as well. Notebooks need to have quality power supplies that is why there was a special attention paid to the quality of supply and its electric parameters.
|
guest ::
RSS feed.