National Repository of Grey Literature 164 records found  beginprevious141 - 150nextend  jump to record: Search took 0.00 seconds. 
Improvement of power efficiency of co-generation units
Pokorný, Vojtěch ; Škorpík, Jiří (referee) ; Pospíšil, Jiří (advisor)
In this masters thesis are discusses the possibilities of increasing the electrical efficiency of cogeneration units with an internal combustion engine with the power output 800 kWe. Technical and economical aspect the connection with steam turbine, steam engine and ORC turbine is compared. It include the design of heat exchanger for ORC cycle.
High-speed Steam Turbine
Albrecht, Jan ; Škorpík, Jiří (referee) ; Fiedler, Jan (advisor)
Main aim of presented master thesis is focused on construction of high speed steam turbine. Steam turbine is designed based on parameters of waste incineration plant in Brno. First chapters shortly summarized historical development, transformation process and work principal of steam turbine. Consequently on first captures is in depth described impulse and reaction blading including expansion in i-s diagram and basic equations for efficiency calculations. In major part of master thesis is firstly discussed conceptual possibilities of turbine application for given parameters. Based on chosen concept is compiled algorithm for thermodynamic calculation for each turbine module. Simplify calculation of gearbox is included as well. Based on calculations are compiled construction drawings of all parts of steam turbine.
Design of gasturbine for car
Šíblová, Kamila ; Fiedler, Jan (referee) ; Škorpík, Jiří (advisor)
This diploma thesis deals about the combustion turbine, design, processing and utilization. This work can be divided into three parts. The first part focuses on the theoretical knowledge gained in the field of gas turbines and their applications. The second part addresses the design of combustion turbine and its integral part. The third section describes the expected characteristics of combustion turbines. The work also includes the annex, which includes the technical documentation.
Aerodynamics of axial wind turbines
Just, Jan ; Pospíšil, Jiří (referee) ; Škorpík, Jiří (advisor)
This master thesis concerns about problematics of wind turbines. The document summarizes basic theory based on the law of momentum conservation which is essential tool for the design and calculation of wind turbines. The theory is complemented by number of correction factors and then used in the design of wind turbine for specific parameters. The calculation is performed iteratively using Matlab software and the actual code is given in appendix. Graphs summarizing the progress of various units along the blades are presented in the document. The final section briefly describes advanced topics of aerodynamics concerning other important factors that the field of wind energy deal with in recent time.
Technology for liquefaction gases and its use and distributing
Štěpánek, Jindřich ; Kracík, Petr (referee) ; Škorpík, Jiří (advisor)
This thesis deals with technologies for gas liquefaction and storage. The first section summarizes the development of liquefaction technology using expanders and throttling valves, followed by current technology. This is especially a rotary expanders. The storage technology is the above-ground storage of cryogenic tanks. The thesis includes proposals turbine wheels for liquefaction lines and included two proposals liquefaction cycles.
Turbocharger seals
Holík, Petr ; Fiedler, Jan (referee) ; Škorpík, Jiří (advisor)
This master’s thesis deals with theme of turbocharger seals. The aims of a thesis are to compare a turbocharger seals used in PBS Turbo turbochargers and to describe a testing of a seals. Principle of turbocharging and types of turbocharger are described in fist part. Next point of the thesis is describing of a face seals and non-contacting seals. The main part of the thesis describes kinds and reasons of seals testing; also contains comparison between labyrinth seals and piston ring, comparison of seals of PBS Turbo’s turbochargers and assesses the impact of turbocharger angle on the tightness of the seal.
Design Kalina cycle for geothermal power plant and its turbine.
Luermann, Július ; Martinec, Jiří (referee) ; Škorpík, Jiří (advisor)
This master’s thesis analyses Kalina cycle, a power cycle where ammonia – water solution is used as a working fluid. The first part of this study introduces us to the Kalina cycle, presents its advantages and disadvantages, characteristics of the working fluid and its applications. Second section concerns with the method of cycle design and describes the calculation model made in this thesis. The calculation model is attached in a separate .XLSM file. The third part shows calculation of the cycle for given parameters, determination of cycle efficiency and main proportions of the thermal turbine. In the conclusion are the interpretations of the calculations results.
Increased power microturbines operating in indirect circulation
Polák, Luboš ; Fiedler, Jan (referee) ; Škorpík, Jiří (advisor)
Turbogenerator unit 100B TGU, produced in the First Brno Engineering Velká Bíteš a.s., works in Brayton indirect circulation. The aim of this work is the proposal to increase performance levels of technological unit in which the micro-turbine is applied. The work presents various ways to increase performance and efficiency of circulation. The possible options are compared with each of the technological and economic terms. Based on these criteria was selected variant feeding additional water into the circulation. For this design was the work of a mathematical model based on, which was established as the economic balance of the selected variants. The thesis also proposes a technological scheme, which is already incorporated the selected variant and an outline of the verification tests.
3-wheel air cycle machine
Vrána, Jan ; Fiedler, Jan (referee) ; Škorpík, Jiří (advisor)
For air cooling in aircrafts is used an air cycle machine. Recently, there is focusing on incresing efficiency of air cycle and due this are added another rotors. Design of machine with three rotors is performed in this thesis.
Design concept of the facility for the educational objectives of the boiling crisis
Vojáčková, Jitka ; Škorpík, Jiří (referee) ; Martinec, Jiří (advisor)
This thesis deals with a design concept of the facility for the educational objectives of the boiling crisis. In the first part, the issue of boiling crisis is explained. There are also examples of some experimental facilities in the world. The second part includes design concept of a loop, which is accompanied by designs of individual devices, such as separator, condenser, exchanger, pump, water tank, electric heater. The thesis also states designs of throttle control, temperature control and flow control.

National Repository of Grey Literature : 164 records found   beginprevious141 - 150nextend  jump to record:
See also: similar author names
2 Škorpík, Jakub
1 Škorpík, Josef
Interested in being notified about new results for this query?
Subscribe to the RSS feed.