|
|
Influence of Change in Frequency of the Supply Current to the Operational Parameters of the Discharge Light Sources
Kuptsov, Alexander ; Škoda, Jan (referee) ; Krbal, Michal (advisor)
The master’s thesis is devoted to exploiting of gas-discharge lamps and their dependence on frequency of the supply current. The first part describes the theory of discharge, its types and properties, terms of its origin, and ways of its exploitation. The second part concerns electrical ballast systems of gas discharge light sources, inductive (reactive) and electronic ballasts, principles of their functioning, advantages and disadvantages, and the comparison of their properties. The following chapters deal with low-pressure and high-pressure gas-discharged lamps, compare their properties and describe exploitation of fluorescent lamps. Before conducting the experiment we have described the influence of frequency of the supply current on fluorescent tube lamps. Preparations for laboratory measuring have been also implemented. During the experiment the two types of lamps have been analyzed, the results of the research are summed up in the conclusion.
|
|
|
Luminance scanning of luminaires and light sources
Ševčík, Ondřej ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
Práce se zabývá měřením křivek svítivosti světelných zdrojů a svítidel konvenčními a nekonvenčními metodami. Úvodní část práce je věnována popisu zrakového systému a základních fotometrických veličin. Hlavní teoretická část je zaměřena na popis současných metod měření křivek svítivosti a nových metod měření pomocí jasového analyzátoru. Současně jsou pro jednotlivé metody uvedeny zdroje nejistot, které ovlivňují výsledky měření. Těžiště práce spočívá v návrhu metodiky měření křivek svítivosti z jasových skenů svítidla a následném ověření tohoto postupu vlastním měřením. Dále bylo provedeno srovnání naměřených výsledků navrženým postupem, s výsledky konvenčního měření na goniofotometru s luxmetrem.
|
|
|
Photometry and spectroradiometry of LEDs
Vysoudil, Martin ; Škoda, Jan (referee) ; Drápela, Jiří (advisor)
This thesis deals with the processing of light technical parameters and performance of key LED chips for their applications in lighting systems. The aim is to create a laboratory model for measuring the qualitative and quantitative parameters of highly luminous light LED emitted depending on the angle, using a spherical integrator 0.3 m, goniometer and fiber spektroradiometr /luxmeters. Goniometer is designed using modular optomechanical parts company Thorlabs. Due to the current passing through the LED chips heat up considerably. To light LED chip parameters tested were not affected by heat from the chip is required to pay the heat generated by a passive radiator. Another part of this thesis is the reconstruction of an older model spherical integrator. Reconstruction must be undertaken so as to ensure sufficient cooling again tested LEDs. Light scattered in the ball of the integrator is led by the optical cable to the spektroradiometr that are subsequently recorded its parameters. The second element used to measure the light produced by the LED source is photocell. Spherical integrator must be appropriately modified to indicate the two measuring elements and also meet the standards of determining the correctness of measurement. At the end of the measurement results will be compared with catalog values provided by the manufacturer.
|
|
|
Evaluation of Lighting Quality Using Modern Software Tools
Fazekas, Tibor ; Škoda, Jan (referee) ; Baxant, Petr (advisor)
This thesis deals with the evaluation of the quality of lighting with the usage of the latest software products used nowadays. The first part of the work is about indoor lighting, the basic requirements invested in lighting, and the basic concepts of indoor lighting. The second part includes complete search for today's computer implements for projecting, simulating, calculation and analysis of light, their functions and characteristics, including luminance analyzers based on CCD sensors and their software equipment. The last part of the work has the task to model a computer room using softwares which can be found within the territory of VUT Brno, and the task was to assess its lighting. Following this, with the help of luminance analyzer, the task is to capture the scene under different lighting conditions and to evaluate the measured data.
|
|
|
Energy Optimization and Operation of Public Lighting
Houdek, Michal ; Škoda, Jan (referee) ; Baxant, Petr (advisor)
An objektive of this university graduation work is an essay about any possibilities for energy savings with operation optimalization of public lightings. Understandings and introduction operation problems of public lighting is devote in first part of this work. Here we can chapters as Importance of public lightings or Gulations and norms in ralation to public lightings. The bigist and special attention is concentrated to description to public lightings systems and it is basic components. Another main part of this work is demonstration of used systems that are leading to energy savings for public lightings. These problems are detailed and explained in chapter Regulation of public lighting systems. This graduation work is describing individual types of regulation with the systems that are used with these regulatios in systems of public lightings. The assignment of last part of graduation work was to make sample calculation of energy demand and calculatin of yearly consumption on exemplary temporary system of public lightings. For this occasion was extra special auxiliary application sytem set up inside the Microsoft Excel program where all individual calculations were done.
|
|
|
Information and communication technologies in energetics
Stavinoha, Jakub ; Škoda, Jan (referee) ; Baxant, Petr (advisor)
The thesis is focused on the information and communication technologies used in the energetic. Problematic areas in energetic which are regulation, metering, control of waste minimalizations, expense and maximalization of earnings. These aspects lead to implementing expert systems, which have to process this bulk of information necessary for increasing efficiency and economization of single processes. Systems used in practice have their own hierarchical structure, where every application requires specific access of selection of used components that suit to the application. First of all it is about acceptable device selection in single level of the system: metering and regulation, data acquisition out of the process and informative layer. Suitable choice flowing from previous, already settled up application is possible to reach maximum efficiency of the whole system. In the thesis there are introduced systems used in practice and possibilities of increase the effectiveness of generation, transmission and distribution with ICT usage in distributed power generation. We are mainly talking about upgrade processes joined with power generation of energy, diagnostics, isolation states on the power line and usage of expert systems for distribution.
|
|
|
Remote measuring systems and its utilization in practise
Kukla, Zdeněk ; Škoda, Jan (referee) ; Baxant, Petr (advisor)
This master’s thesis is dealing with remote measuring systems and their utilization in power engineering. In the first part there are described requirements on an autonomous measuring system and description of AMM and AMR systems. Communicating and data flows working on accurately defined communicating layers are also depicted in this part. The attention is devoted to the possibility of data processing and functions of devices offered by these attributes. In the following part there are described reasons for utilization of remote measuring systems in power engineering and the main advantages of connection of more devices into one unit. After finding of required parametres and functions of systems, a suggestion of terminal device is created in the same way. The suggestion is described in the measuring part with A/D converter, processing in microprocessor, measuring and evaluating alogorithms and attributes of communication of bus used. The last part is devoted to utilization of remote analysis in small power stations in dispersed production. Formation of deformation of voltage, harmonic analysis of signal and its application for data processing are described there. Described analysis was tested on data acquired from a cogeneration unit.
|
|
|
Distributed control systems and its utilization in practise
Otčenášek, Martin ; Škoda, Jan (referee) ; Baxant, Petr (advisor)
In control technique there is evident highly expressive trend of shifting from efficient central managing systems towards smaller systems which are distributed on technology and which are connected by communication bus. There is no need to link all signals to central management system, operation is then distributed and realized directly in individual parts of technology. That’s why these systems are called distributive managing systems. Distributive managing systems are widely used not only in industrial applications but also in buildings, cars, etc..
|
|
| |
|
|
METHODICAL RECOMMENDATION FOR INSTITUTES OF THE AS CR CONCERNING REPROTING OF REAL ELIGIBLE INDIRECT COSTS OF THE PROJECT
Škoda, Jan ; Starosta, Karel
The aim of the Methodical Recommendation is to create possible common principles for institutes of the Academy of Sciences of the Czech Republic (AS CR) concerning the allocation of indirect costs to projects, considering mainly the rules of fund providers requesting reporting of real costs via full cost methodology. Proposed methodology is based on usual management and accounting practices of institutes of AS CR and lie in principles of maximum simplicity and effectiveness. It should result in minimum increase of real indirect costs caused by application of such methodology, it enables closing of economic year on time and also reporting of necessary data to fund providers.
|
guest ::
RSS feed.