|
|
Design of heat exchanger
Klučka, Ivan ; Nekvasil, Richard (referee) ; Lošák, Pavel (advisor)
This thesis is focused on the thermal-hydraulic and construction design of heat exchanger with floating head. The introductory part is dedicated to the design of heat exchangers. Next part is focused on the thermal-hydraulic design created in HTRI software (module Xist. The next section is the strength calculation of selected components of the heat exchanger according to EN 13445 in software Sant'Ambrogio. The following part describes each of the analysis in software Ansys Workbench. The final part contains complete manufacturing documentation of heat exchanger.
|
|
|
Influence of deposits on algae growth in a tubular photobioreactor
Vajaýová, Veronika ; Lošák, Pavel (referee) ; Naď, Martin (advisor)
The content of the theoretical part of this bachelor thesis is a description of the tubular pho-tobioreactors, comparison of the individual types of the cultivation devices, the fundamental parameters influencing the efficiency of biomass production, and problems of formation of deposits on the inner surface of the photobioreactor. The attention is focused on the effect of sediment formation on the growth of microalgae in the tubular photobioreactor. Since the sediments affect the resulting light intensity in the suspension in the tubes, this phenomenon is reflected in the overall cultivation efficiency and the biomass yield. The practical part presents the course of measurements performed in the vertical tubular photobioreactor designed for flue gas cleaning using the microalgae Chlorella pyrenoidos Chick (IPPAS C2). The aim was to solve the problem of foaming, which subsequently caused deposits in the system's tubes or other parts. To this end, two measures were tested: • the mechanical one in the form of a wire mesh, • the chemical one using sunflower oil. The measured values were the basis for determining the effect of deposits on light intensity and also served to evaluate the functionality of the tested measures.
|
|
|
Design of the copper cleaning equipment
Šmarda, Radek ; Pernica, Marek (referee) ; Lošák, Pavel (advisor)
The bachelor thesis has two main parts. First part contains methods of getting non-ferrous metals from waste and the second part is focused on designing device for copper purification from a predefined waste. At the end of the bachelor disertation are performed torsion shaft control, calculation of gear dimensions and shear test of parallel keys. There is attached drawing documentation to the bachelor thesis.
|
|
| |
|
|
Pressure vessels loaded by external pressure
Paták, Roman ; Létal, Tomáš (referee) ; Lošák, Pavel (advisor)
This final thesis addresses the approach of standards and software for calculation of pressure vessels loaded by external pressure and a design of own calculation software, including a demonstration on chosen geometry. The approaches of standards and software are solved in the form of research. The practical part describes the developed software, selected technologies for development and results of the demonstration. The demonstration was carried out on two geometries and was successful.
|
|
|
Design of heat exchanger
Buzík, Jiří ; Lošák, Pavel (referee) ; Nekvasil, Richard (advisor)
The master thesis deals with thermal hydraulic design and strength design of a heat exchanger with “U” tube bundle inside of a shell. The first chapter introduces general design issues of the heat exchangers. The following chapter describes thermal hydraulic design created in software Maple 16.0 by using Kern’s method and the method of Bell-Delaware. HTRI software was used for the control of thermal hydraulic design correctness. To check critical locations of fluid flow in space between the tubes, the CFD model was created at ANSYS Fluent 14.0 software. Accuracy of strength design was verifying by Sant’ Ambrogio software in accordance with ČSN EN 13 445 standards. The last chapter concerns with FEM analysis. According to standards ČSN EN 13 445 the design by analysis namely method based on stress categories were used for the strength analysis of nozzle.
|
|
|
Jacketed stainless steel pressure Vessel
Kamarád, Miroslav ; Buzík, Jiří (referee) ; Lošák, Pavel (advisor)
Pressure vessels occupy a prominent place in the field of process equipment due to their wide use in various industries. From design and dimensional point of view, great emphasis is placed on accuracy, reliability and above all safety. The bachelor thesis is focused on the stress analysis of the jacketed pressure vessel according to ČSN EN 13445 [1]. The stress analysis was performed with use od finite element method (FEM) using ANSYS Workbench software together with stress categorization by EN 13445 [1].
|
|
|
Design of steam generator tube bundle
Klíma, Martin ; Lošák, Pavel (referee) ; Nekvasil, Richard (advisor)
Diploma thesis is focused on analisis of the steam generator tube bundle on the basis calculation by the finite elements method and softwaru ANSYS. Next it will also také account of job descriptions and methods of operation of the equipment propřed plan revision kontrol points that will be most critical. Annexes included documentary of model from the SolidWorks.
|
|
|
Fatigue evaluation methods for pressure equipment utilising numerical analysis results
Boleloucký, Václav ; Lošák, Pavel (referee) ; Létal, Tomáš (advisor)
Diplomová práce se zabývá hodnocením únavové životnosti v okolí konstručního uzlu tlakové nádoby, kde vzniká výrazná koncentrace napětí a je zde předpoklad primárního vlivu na únavu materiálu. Konkrétně se jedná o místo přechodu kontrolního otvoru do pláště analyzovaného zařízení. Práce obsahuje teoretickou a praktickou část. V teoretické části jsou představeny pojmy a metody hodnocení, související s danou problematikou. Na základě těchto metod je provedena analýza konstrukčního uzlu tlakové nádoby. Analýza je provedena metodou konečných prvků na skořepinovém a objemovém modelu nádoby v softwaru ANSYS Workbench, její výsledky dále zpracovány a vyhodnoceny dle aktuálního návrhu úpravy evropské harmonizované normy EN 13445--3, kapitoly 18. Výsledky analýz jsou hodnoceny v závěru práce.
|
|
|
Check calculation of parts of the pressure vessel
Bukal, Oldřich ; Lošák, Pavel (referee) ; Létal, Tomáš (advisor)
Pressure vessels play irreplaceable role in different branches of industry. From the perspective of pressure vessel construction high reliability and safety are required. This bachelor thesis is focused on control calculation of the basic parts of a vessel according to the standard ČSN EN 13445-3 including FEM analysis followed by stress categorization.
|
guest ::
RSS feed.