|
|
Two-generation family house
Tobiášek, Pavel ; Dohnal, Jakub (referee) ; Utíkalová, Ivana (advisor)
The content of the bachelor thesis involves the design of project documentation for a family house at the stage of building permit. The house is designed as a two-generation house for grandparents and a family of four. The building is situated on a flat plot in a newly developed residential area. In the structure is consists one underground and two above-ground floors. The family house is founded on strip foundations and a slab. The structural system is wall-based. The basement is made of reinforced concrete masonry, while the above-ground floors are constructed using a timber frame made of DEK wooden panels. Horizontal structures are reinforced concrete above the basement and wooden above the first and second floors. The roof consists of layers resting on these wooden structures. The roof assembly is flat with a final layer of shingles. The drawing section was processed using the Revit and AutoCAD software from AutoDesk.
|
|
|
Family house on a slope
Odložilíková, Monika ; Dohnal, Jakub (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor thesis is the development of detailed design documentation for a family house situated on a slope in the village of Přílepy. The house is intended to serve as a permanent residence for a family of four. It is a two-storey detached building featuring a flat green roof and includes a garage for two cars. The property is set on gently sloping ground with a gradient from northeast to southwest. The floor plan of the house is a simple rectangular shape with a partially protruding section. The building is founded on a strip foundation, and the vertical perimeter structures are designed using the Porotherm system with a contact insulation system. Horizontal structures are designed as monolithic reinforced concrete. The individual floors are connected by a monolithic reinforced concrete two-arm staircase.
|
|
|
Apartment build Concreto
Pokorný, Lukáš ; Utíkalová, Ivana (referee) ; Dohnal, Jakub (advisor)
The subject of this bachelor thesis is the processing of project documentation for the new construction of the Apartment building Concreto with almost zero energy consumption. The building is designed as a three-story fully basement structure. The underground floor includes collective garage and technical rooms. The first, second, and third floors contain residential units. A total of 21 residential units have been designed. The building has a flat single-layer roof with gravel. The structural system of the building is a skeleton frame, consisting of prefabricated reinforced concrete columns, beams, and braces. The exterior walls are made of brick blocks with an ETICS contact insulation system. Another significant structural element is the core with the elevator shaft. The horizontal structures are formed by SPIROLL ceiling panels. The building is founded on prefabricated cup footings placed on monolithic piles. The bachelor thesis includes project documentation for construction implementation.
|
|
|
Detached house
Dyntarová, Aneta ; Dohnal, Jakub (referee) ; Jelínek, Petr (advisor)
The subject of this bachelor thesis is the preparation of project documentation at the level of construction implementation. The aim was to design a family house with almost zero energy consumption. The new building was designed on a flat building plot on the outskirts of Mlázovice. The family house has two floors with a partial basement and is designed for family of four people. The residential part of the house is roofed with a gable roof with a covering made of ceramic tiles. The garage situated on the north side of the building has a vegetated flat roof. The main load-bearing system is made of ceramic blocks. The perimeter basement masonry is made of lost formwork blocks. Thermal insulation of the building is solved by contact insulation system.
|
|
|
Apartment build in Slušovice
Vyvlečková, Iveta ; Pěnčík, Jan (referee) ; Dohnal, Jakub (advisor)
The aim of the bachelor thesis is to elaborate the project documentation of a new residential building in Slušovice. The building is designed as a detached, non-basement building. It has an irregular shape and is covered with a flat single-skin roof. On the first floor there is a background of the house, a technical room, warehouses, a meeting room and a cleaning room. Parking spaces are provided on the property. Floors 2.NP, 3.NP, 4.NP are used for housing and in total there are 12 residential units each of size 3+1. The vertical structural system is made of SILKA sand-lime blocks. Horizontal load-bearing structures are made of reinforced concrete monolithic slab. The project documentation also includes a basic assessment of the building in terms of building physics.
|
|
|
Detached house under Holedna
Nemečková, Petra ; Dohnal, Jakub (referee) ; Jelínek, Petr (advisor)
The aim of the bachelor´s thesis is to design a detached passive house for family with 2 kids. It is located in Brno, Jundrov. The main entrance is situated to south-east. The building has flat extensive green roof, ventilated facade with wooden cladding and mineral insulation. It is based on plain concrete foundation strips. The vertical structures are masonry made of aerated concrete blocks. Horizontal load-bearing structures are constructed from prestressed concrete panels. The building has two storeys. On the first floor is situated social zone, where is living room connected to the kitchen and bathroom with WC and technical zone, where is utility room and storage. These two parts are slightly divided by hallway. On the second floor is private zone with bedrooms, master bedroom, study, walk-in wardrobe, bathroom, and WC. An external blinds are designed on the windows oriented to south-west and south-east to regulate daylight and reduce heat gains. Heating and cooling in the house are provided by an underfloor heating covering the thermal losses and gains of the building. Heat supply for water heating and underfloor heating is provided by a heat pump. Excess water from extensive green roof leads into the sewer system and a stormwater storage tank with a volume of 5m on the northwest edge of the plot. Afterwords, rainwater is discharged together with prefiltered sewage water into the combined sewer. Electricity is provided by a public network. Forced ventilation is provided by ventilation unit using flexible ducts installed in suspended ceiling. Ventilation is used only in living areas, bathrooms, and closet. The system has supply and exhaust ducts for air circulation connected to the distribution boxes and ended by vents with adjustable airflow . The ventilation unit with heat recovery and an air flow rate of 285 m/h is installed in utility room. Air exchange between the ventilation unit and exterior and ventilation unit and distribution boxes is provided by aerfoam ducts. Energy Performance Certificate is A – very efficient.
|
|
|
DUE Seifert's residence
Smolka, Ondřej ; Utíkalová, Ivana (referee) ; Dohnal, Jakub (advisor)
The subject of the bachelor thesis is the project documentation for the construction of a residential building located in the city district of Brno - Lesná at the intersection of Nejedlého and Seifertova streets. It is a building for housing with one underground floor and eight above-ground floors with the last floor stepped to create a terrace. The basement is used as a collective garage including technical rooms primarily for the ventilation of the garage. On the first floor there are technical facilities and a second bulk garage. In the remaining seven floors there are residential units of sizes 1 bedroom and 3 bedroom. The building has two reinforced concrete monolithic cores, where each of them has a staircase and two lifts. The structural system of the building is designed as a reinforced concrete monolithic skeleton with load-bearing columns and ceiling slabs without penetrations. The building is based on 900 mm diameter piles, a watertight reinforced concrete white bath and a foundation slab. Primarily acoustic brick blocks are used for the infill non-loadbearing masonry perimeter and interior walls. The roofs of the building are designed to be flat, the main roof over the top floor is with a PVC sheeting and the roof over the first floor of the stepped storey is with a ductile sheeting. The content and design of the proposed work also provides for a planned dilated adjacent residential building that shares a basement with the main building, has four floors above ground and is situated perpendicular to the residential building under consideration.
|
|
|
Guesthouse
Schmidt, Marko ; Dohnal, Jakub (referee) ; Brukner, Bohuslav (advisor)
The aim of the thesis is to design a guesthouse project. The proposed building is located in Brno, in the South Moravian Region. The designed guesthouse has three above-ground floors and one underground floor. In the basement of the building, there is technical facilities and parking spaces. The first above-ground floor houses restaurant facilities and food preparation areas. The second and third above-ground floors accommodate guest rooms.
|
|
|
Detached house in Boleradicích
Pospíšilová, Kateřina ; Jelínek, Petr (referee) ; Dohnal, Jakub (advisor)
The aim of this bachelor’s thesis is to design a nearly zero energy detached house for a family of four. The first part of the thesis is architectural and structural design, including fire safety solution and building physics, which is focusing on acoustic assessment, thermal assessment, and assessment of daylight. The second part is design of building services and design of heating system for a documentation for building permit. The building is located on gently sloping plot in a Boleradice in South Moravia. It has two storeys and gable roof. There is a separate one-storey garage with flat green roof on the plot. The building is based on a reinforced cocreate foundation slab on gravel of foam glass. The external walls are made from sand-lime blocks with ETICS of expanded polystyrene with graphite. The floor structure is a cast-in-place reinforced concrete slab. Gable roof is design like a warm roof, with load bearing structure from timber. The ground floor includes a walk-in wardrobe, a study, a utility room, a bathroom, a pantry, a living room open to a kitchen with access to the deck. The private zone, located on the first floor, consists of a master bedroom, children’s bedrooms, a bathroom, a separate toilet, and walk-in wardrobes. In the project, the design includes mechanic ventilation with heat recovery, rainwater management system, sanitary installation, electric installations, and a photovoltaic system as part of design conception of building services. Heating and domestic hot water treatment are provided by an air-water heat pump. Distribution of heat is provided by floor heating. The project also includes the Energy Performance Certificate.
|
|
|
Detached house in Opatovice
Řezáčová, Veronika ; Jelínek, Petr (referee) ; Dohnal, Jakub (advisor)
The aim of this bachelor’s thesis is to develop a documentation for building permit of a new-build single-family house. First part of this thesis focuses on architectural and structural design of detached house with separate garage. This part also contains building physics assessment and fire safety assessment. The house has a rectangular shape, two-storeys and it is roofed with a gable roof. On the ground floor, there is a wind lobby, a utility room, a hall with a staircase, a study, a small storage, a living room connected with a kitchen, a bathroom and a toilet. On the first floor, there is one master bedroom with a walk-in wardrobe, a bathroom and three children’s bedrooms. The structural system is designed as masonry composed of sand-lime blocks, external walls are insulated with EPS. Foundations and floor structure are designed as the cast-in-place reinforced concrete slabs and the roof structure is made of prefabricated elements. Second part contains the concepts of building services design and a documentation for building permit for the heating system. The main source of heat is an air-water heat pump. Domestic hot water is also heated by solar panels and the house is heated by floor heating. Ventilation is ensured by a mechanical ventilation unit with heat recovery. Rainwater will be collected in a storage tank and used for watering the garden. An energy performance certificate of the building is also included.
|
guest ::
RSS feed.