National Repository of Grey Literature 1 records found  Search took 0.00 seconds. 

Warning: Requested record does not seem to exist.
Influence of humidity on total sterilisation effect of dielectric barrier discharge
Kramárová, Petra ; Bartlová, Milada (referee) ; Kozáková, Zdenka (advisor)
The main subject of this diploma thesis is the study of the effect of humidity on the total sterilization effect of the dielectric barrier discharge. Sterilization is a process which can eliminate all forms of life. The plasma sterilization is one of the methods that are suitable for sterilization of temperature and chemical sensitive materials. This sterilization method was proved to be effective on the wide spectrum of procaryotic and eucaryotic microorganisms. Basically, the main inactivation factors for cells exposed to plasma are heat, UV radiation and various reactive species. Dielectric barrier discharge (DBD) operating at atmospheric pressure was used for the sterilization of the samples. The discharge was generated in dry air and in humid air. The plasma power densities were 2 160 mW.cm-3, 2 279 mW.cm-3 and 2 760 mW.cm-3 (dry air) or 2 326 mW.cm-3 and 2 850 mW.cm-3 (humid air). Humidity of air was achieved using a wash bottle filled with water through which air flowed into the DBD reactor. Fungi spores of Aspergillus niger were used as model microorganisms. Whatman paper No. 1 was used as the carrying medium. When comparing sterilization efficiency of humid and dry air operating at the same conditions, the higher sterilization effect was observed in humid air. The sterilization effect of the DBD generated in air was compared with results obtained during plasma generation in argon and nitrogen. At the same conditions, the highest sterilization effect was observed in argon, followed by humid air, nitrogen and dry air. It was found out that in our experimental setup the active species are probably the main inactivation mechanism. The influence of temperature on the inactivation of microorganisms was completely negligible. The discharge parameters were studied by means of the optical emission spectroscopy (OES). Plasma treated samples were analyzed employing scanning electron microscopy (SEM). Damage of the microorganisms due to the effect of plasma as well as plasma effect on the structure of the carrying medium was evaluated.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.