|
|
Steam boiler for spruce bark burning-18t/h
Dračka, Lukáš ; Heinze, Bedřich (referee) ; Skála, Zdeněk (advisor)
To design a grate boiler with a natural circulation for burning of a pine bark with an output 18t/h is a primary objective of this dissertation. Individual parts of a boiler and it´s heat transfering surfaces were calculated after the working out of stoichiometric calculations from given element analysis of fuel. All computations have to fulfill several parameters: boliler output, temperature and pressure of an overheated steam.
|
|
|
Stean boiler for sub bituminous coal, steam parametres 235 t/h, 14 MPa, 540°C
Horák, Stanislav ; Moskalík, Jiří (referee) ; Baláš, Marek (advisor)
The aim of the work is to design a brown coal combustion boiler of 235 t/h output. The work is divided into several parts. First, stechiometric calculations and calculations enthalpy of air and flue gas are performed. It is calculated heat balance of the boiler, the boiler losses and the thermal efficiency of the boiler is determined. After designing the combustion chamber thermal calculation is made. Then, individual heating surfaces are proposed and at the end of the calculations are controlling the overall energy balance of the boiler. For calculation was design documentation added.
|
|
|
steam boiler for woody biomass 88t/h
Lučko, Martin ; Ing.Milan Ryšavý (referee) ; Skála, Zdeněk (advisor)
The aim of the work is to design a plain wood combustion boiler of 88 t/h output. Fuelling component analysis has been added to the basic boiler parameters. For given fuel is prepared stechiometric calculations. After making the heat balance of boiler is determined the thermal efficiency. For given output of steam parametrs (temparature, pressure, volume) are designed individual convective surfaces and dimensons of the boiler. It is also made drawings.
|
|
|
Steam boiler with grate firing , burning coal or wood biomas 200 t/ h, 9,3 MPa 520°C
Čech, Jaroslav ; Hudeček, Mirko (referee) ; Skála, Zdeněk (advisor)
The aim of the work is the design of a grate boiler of 200 t . h-1 output, which will burn brown coal or wood chips. The work is divided into several parts. First, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler was counted boiler efficiency. The design of individual heating surfaces is proposed and at the end are controlled the overall heat balance of the boiler. The calculation is supplemented by drawings.
|
|
|
Grate Biomass Boiler - 88 t/h; 9.6 MPa; 520 °C
Střecha, Josef ; Hudeček, Mirko (referee) ; Lisý, Martin (advisor)
This master's thesis deals with the design of stoker-fired boiler for combustion of biomass. The main points of work are stoichiometry calculation of combustion, determining the dew point of flue gas, calculation of losses, which ones serves for determination of boiler efficiency, dimension design and detail calculation of thermosetting surfaces. In the last chapter is numbered total balance and real thermal efficiency of boiler.
|
|
|
Boiler for Brown Coal Combustion
Pavlo, Matej ; Hoffman, Pavel (referee) ; Skála, Zdeněk (advisor)
The aim of the master’s thesis is thermal calculation and dimensional design of boiler of 235 t/h which burns brown coal. The work is divided into several parts. In the first part, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler, the boiler efficiency is counted. In the next part, thermal calculation of combustion chamber is calculated. Subsequently, design of the individual heating surfaces is proposed. Finally, the overall heat balance of the boiler is inspected. The calculation is supplemented by drawing of the boiler.
|
|
|
Design of Steam Boiler
Kadlec, Tomáš ; Nechvátal, Ondřej (referee) ; Skála, Zdeněk (advisor)
This thesis is focused on design of black coal combustion boiler of 160t/h output. It consists of several parts. First, stechiometric calculations and enthalpy of air and gas are made, then heat balance of boiler and the boiler losses are calculated, and also thermal efficiency is determined. In next step, the combustion chamber is designed and its thermal calculation is made. Then, each of heating surfaces are designed, and in the last step overall energy balance of the boiler is checked. The scheme of pressure system and design documentation added.
|
|
|
Steam boiler for straw 10t/h, 320°C
Truhlář, Marek ; Kól, Přemysl (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is design a grate steam boiler for burning straw with an output of 10 tons of steam per hour. The produceds team has parameters 320 °C, 3,2 MPa. For a given fuel (fytomass) is calculated stoichiometric calculation. The following is the calculation of the heat balance of the boiler including the determinativ of thermal efficiency. The fuel used, the required parameters of steam and feed water temperature are designed individual convective surfaces and dimensions of the boiler. The boiler design includes drawings.
|
|
|
Steam Boiler with grate firing RDF 70t/h, 4MPa, 400°C
Mokriš, Lukáš ; Kohout, Přemysl (referee) ; Skála, Zdeněk (advisor)
The goal of this Master’s Thesis is to design a refuse derived fuel (RDF) fired steam boiler with 70 t/h processing ability. The assignment consists of requested output parameters of overheated steam and analysis of fuel components. This analysis was used for stoichiometric calculation of fuel. Furthermore, heat balance of the boiler was calculated, from which was determined the heat loss and the efficiency of the boiler. Individual designs and calculations of heating surfaces and boiler dimensions were carried out from requested output parameters.
|
|
| |
guest ::
