|
|
Preparing of perovskite solar cell
Lunga, Jiří ; Strachala, Dávid (referee) ; Kadlec, Michal (advisor)
The work deals with the theory of preparing perovskite solar cells. How about basic structures and the specific types of training opportunities and reproducibility of results. In the third part describes the complete preparation of the article, which reached the highest efficiency and the procedure for subsequent repetition of the experiment
|
|
|
Titania mesoporous films fabricated by material printing
Chludilová, Markéta ; Drbohlavová, Jana (referee) ; Dzik, Petr (advisor)
Thesis deals with the creation of thin layers of a porous titanium dioxide. The solutions for the formation of thin layers were prepared using a solgel method by mixing TTIP, polyethylene glycol of molecular weight 1500 and dimethyl, layers were subsequently printed by material printer to glass substrate and calcinated at 450 °C for 2,5 hours. Optical and SEM microscopy was used to observe structure of individual layers. Samples, that showed the greatest porosity, were subsequently studied by electrochemical measurments and by photocatalytic aktivity determined via hydroxylation of coumarin.
|
|
|
Electron beam lithography on non-conductive substrates
Hovádková, Zuzana ; Šamořil, Tomáš (referee) ; Dvořák, Petr (advisor)
The expansion of electron beam lithography has been really fast during last years. It is mostly because its capability to create big structures with a fine resolution. This study focuses on electron beam lithography on non-conductive substrates, exactly on glass. The lithography on glass is mostly used in life sciences. Because of the transparence of the substrate and its non-toxicity it can be used for cell adhesion. In the experimental section there are shown and compared two techniques how to compensate the charge accumulated on the top of the surface.
|
|
|
Study of electrical and dielectric properties of ionic liquids
Maráčková, Lucie ; Nešpůrek, Stanislav (referee) ; Zmeškal, Oldřich (advisor)
This bachelor´s thesis is focused on a study of electrical and dielectric properties of ionic liquids in the form of solution and thin layers. The values of breakdown voltage have been determined from current-voltage characteristics in solutions. Frequency dependencies have been also observed and used for calculation of values of parallel conductivity and capacity of ionic liquid. It was found that solutions is contained by model with one parallel combination of conductivity and capacity. Thin layers have been created by mixing up PEDOT:PSS with two ionic liquids: 1-butyl-3- methylimidazolium trifluoromethanesulfonate and 1-ethyl-3-methylimidazolium tetrafluoroborate. These layers have created electrochemical battery as is evident from current-voltage characteristics. Frequency dependencies are more complex, a model contained two or respectively three parallel conductivities and capacities which have been influenced by PEDOT:PSS and by ionic liquids characteristics.
|
|
| |
|
|
Lamination of ceramic tapes
Smiešková, Jana ; Pouchlý, Václav (referee) ; Trunec, Martin (advisor)
This master’s thesis deals with ways of lamination of ceramic tapes prepared by gel–tape casting method. The thesis is divided into two parts. The first part, a literary recherche, describes methods of production of thin ceramic layers. The main focus is on the tape casting method. The second, experimental, part of the thesis describes the preparation of ceramic suspensions, the fabrication of thin ceramic layers by gel–tape casting method, the preparation of laminated bodies from thick-walled discs and laminated tapes and it also shows a possibility of creating of ceramic layers by the spin coating method used on polycrystalline ceramic substrate.
|
|
|
Study of thin film organic materials thickness
Hegerová, Lucie ; Veselý, Michal (referee) ; Zmeškal, Oldřich (advisor)
The diploma thesis deals with the determination of thickness and refractive index of thin organic films using image analysis. In the theoretical part there are described principles of the methods, which are used to prepare the films (spin coating, inkjet printing, vapour deposition), the characteristics of thin films, ways of finding out the thickness and refractive index of substances (weight methods, electric methods, method based on measurement of absorption coefficient of light, interference microscopy, ellipsometry) and also image analysis (harmonic and wavelet analysis). Interference microscope Epival - Interpako (Carl Zeiss Jena), digital camera Nikon Coolpix 5400 and computer were used for the determination of thickness and refractive index. The thicknesses of layers were set on the basis of interference images of edges and grooves – both from the side of the metal contact and the side of underlying glass. The refractive indices of thin layers were then set using the recorded figures. In the final part of the thesis there are discussed the results of interference images photographed along the full length of the aluminium contact which are used for measuring electrical characteristics of DPP structures. The produces are thicknesses and refractive indices of individual layers.
|
|
|
Preparation and characterization of perovskite solar cells
Juřík, Karel ; Salyk, Ota (referee) ; Pospíšil, Jan (advisor)
This work deals with the perovskite photovoltaic cells. The first part summarises the basic information about this technology and shows the most important milestones in its development. Following part includes the parameters required to characterise the electric properties of a photovoltaic cell and the assessment of its quality. The experimental part of this thesis aims to describe the influence of the annealing time of the perovskite active layer on the final efficiency of created solar cells. The best results were determined to be achieved with the annealing time of 90 minutes.
|
|
|
Transparent conducting tin oxide layers prepared from inorganic precursors
Dvorský, Vojtěch ; Drbohlavová, Jana (referee) ; Dzik, Petr (advisor)
The thesis focuses on the preparation of transparent electrically conductive tin oxide layers. First, a stock sol based on inorganic precursors was synthetized. Substrates were coated with a small amount of sol by spin coating or material printing to form thin layers. By modifying the solution by adding additional substances, specific coating compositions were prepared to optimize the deposition and the resulting layer properties. Selected samples were analysed by mechanical profilometry, XRD, SEM and XPS.
|
|
|
Perovskite solar cells
Poláková, Simona ; Zmeškal, Oldřich (referee) ; Pospíšil, Jan (advisor)
The bachelor´s thesis deals with the study of perovskite solar cells. The theoretical part of this work is devoted to the stability of the perovskite layer and perovskite solar cells, especially chemical and thermal stability are discussed. Furthermore, deposition methods of perovskite active layer were described in more detail. The experimental part deals with the influence of the dropping of the diethyl ether solution during the deposition of the active layer (at different time intervals) on the final efficiency of solar energy conversion, with the preparation of the final perovskite solar cells and with the characterization of the basic electrical properties of the prepared structures.
|
guest ::
