|
|
Small and medium-sized business complex Víchov
Žůrková, Anna ; Kříž, Aleš (referee) ; Dýr, Petr (advisor)
The subject of this bachelor’s thesis is the design of complex for small and medium sized businesses in village Víchov, situated in Plzeňský kraj. The initial idea was the creation of new work opportunities, which are considerably limited in the neighbouring area. The complex consists of two factory floors and an administration building, that is a subject of the project documentation. Each factory floor consists of six connectable units, which are sheathed in grey sandwich panels and visually differentiated by translucent coloured polycarbonate panels under the gable roof with a V cut out of it. Same motive is used for roof above the entrance hall of the administration building, and should evoke the first letter of the village, that the complex is situated in – Víchov. In the already mentioned entrance hall there is a spiral steel staircase, which is resolved as the architectural detail as the separate part of the thesis. For sheathing of the administration building is used a ventilated facade system from brick blocks, which in combination with painted steel and glass entrance hall evokes industry in its purest form. Flat roofs of the side wings of the administration building are designed as vegetative to minimize the loss of greenery because of building-up of the area and as a more responsible way to preserve rainwater. Complex is designed to enable easy access and transportation within and in and out of the complex not only for automobiles but also for trucks, to ensure the parking lots for workers and visitors of the complex and to enable transport by foot between the buildings with exploit of sidewalks and outdoor staircases. Part of the design is also replenishing the greenery and creating a new tree colonnade that should at least partially eliminate the noise from the service of the complex.
|
|
|
A new life for the factory = a new life for Portlaw
Kvášová, Lucie ; Plášil, Jiří (referee) ; Boháč, Ivo (advisor)
The thesis focuses on the reconversion of the former tannery site in Portlaw, Ireland, with a history dating back to the 19th century. Situated in close proximity to the town center, the facility holds significant potential for further utilization. Following its closure, the site remained neglected for a considerable period, now perceived with mixed feelings – as a place with a rich industrial heritage of which Portlaw residents are proud, yet also as a location bearing the negative impacts of past industrial activities on the environment. Strategically located in the valley along the Clodiagh River, the site was established with a canal for water transportation. Its position along the city's gateway enables seamless integration into the urban fabric. Its secluded nature shields it from the eyes of city dwellers, minimizing disruptions to the surrounding environment, making it an ideal venue for activities even with higher levels of noise and lighting. The objective of the proposal is to revive the site and its "genius loci," aiming to achieve a high level of destination attractiveness for both Waterford County residents and tourists. The plan entails the creation of a multifunctional space, new public areas, and greenery cultivation, positively influencing the overall character of the area. The reconversion plan introduces diverse functions, transforming the site into a vibrant and adaptable hub for local residents and visitors alike.
|
|
|
Town planing study "Zbrojovka"
Kosíková, Martina ; Zemánková,, Helena (referee) ; Herzan, Radovan (advisor)
Bc.Tomková Martina. Územní studie „Zbrojovka“. Brno, FAST 2012. The diploma thesis deals with the revitalization of the industrial area of the former Zbrojovka Brno Company. The area is close to the historical centre of Brno. The principal idea of the diploma thesis was to introduce new activities in the area while making use of the current area potential as well as to restore the economic balance and keep the genius loci of the area. The implementation of this idea has required building conversions in the area and the development of a new project the main idea of which is the university campus. The new project of the area benefits from the layout of buildings, especially the layout of large-capacity halls, the closeness of the city centre and the possibility of the railway connection. The whole conception is in compliance with the strategic development plan of Brno which comprises the issues of research, development, innovation and education. On campus there is an independent office building with integrated railway station, multimedia and sport centre as well as a municipal park. The area is open to and offers a wide range of services to general public. The diploma thesis includes the model of the area design.
|
|
|
Industrial Park with Aministration Building
Krupa, Jakub ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
This master thesis focuses on the design and elaboration of project documentation for the purpose of constructing Industrial park with administration building consisting of two parts, SO 01 – Administration building and SO 02 – Industrial building. The two objects are situated on the plot No. 715/1, in the cadastre unit Vrbno pod Pradědem located on an undeveloped land of the investor. The exit from the parking lot connects to the local traffic infrastructure. Public infrastructure leads in proximity to the land. The design of the construction respects local zoning plan. Project documentation was made in compliance with up-to-date requirements according to valid standards and regulations. The building is functionally divided into two objects, SO 01 and SO 02, which are operationally and structurally connected. Constructions of both objects are statically independent. The object SO 01, partially accessible to the public, is used for administrative tasks and staff facilities. Also, there is a sample room available to the public, gatehouse and warehouses. The object SO 02 is purposed for the production of plastic windows and solar panels. It mainly consists of areas used for production, but there is also an office for the master, a machine room for heating, ventilating and air conditioning (HVAC) and staff facilities. The object SO 01 is designed from a wall structural system from clay masonry, clay ceilings, strip foundation and a flat roof. The object SO 02 is designed as a full-metal prefabricated object with a saddle roof and foundation pads. The construction system of this object consists of steel columns. Plan dimensions of SO 01 are 25x14 metres. Building envelope is made from clay blocks, 440 mm in width, filled with mineral wool. Plan dimensions of SO 02 are 66,9x22,9 metres. Object’s curtain walling is made from prefabricated sandwich panels containing a core from PUR material.
|
|
|
Design of the bridge in the industry area
Lipus, Rostislav ; Svoboda, Adam (referee) ; Klusáček, Ladislav (advisor)
The aim of this bachelor‘s thesis is the design and analysis of the concrete bridge in industrial area across river Balinka. Thesis contains static analysis of single span bridge which was chosen from three variants. Final variant is sloping prestressed concrete deck supported by two supports. Calculations were made by Scia Engineering software and compared with manual calculation. The supporting structure is assessed for the ultimate limit state and serviceability limit state The design is created in accordance with ČSN EN 1992-2. This thesis does not contain the time dependent analysis.
|
|
|
REBUILDING OF THE INDUSTRY AREALS AND ZONES - LAUNDRY FACTORY "CHRIŠTOF" IN VYŠKOV
Opatrný, Vladimír ; Pospíšil, Zdeněk (referee) ; Boháč, Ivo (advisor)
REBUILDING OF THE INDUSTRY AREALS AND ZONES - LAUNDRY FACTORY "CHRIŠTOF" IN VYŠKOV. The proposal was approached as to the overall redevelopment area, leaving one central building. Furthermore, it accommodated a number of new buildings for shops, offices and housing. Urban design responds to the surrounding buildings and orientation to the cardinal. Part of the area is used as a park for recreation and sports activities. Overall, this is a change from the closed obsolete and unused territory which becomes a public space for shopping, dining, living and sports.
|
|
|
WHAT TO DO? Conversion of industrial premises, Brno - Obřany
Kocourek, Tomáš ; Rudiš, Viktor (referee) ; Oplatek, Jiří (advisor)
The name of the project prompts the problems of legacy of industrial premises. The goal of my work was to consider, how to use the buildings in the premises in Obřany, Brno. The aim was on the most important object – former building of Essler’s spinning factory, which was supposed to be turned into school of architecture for one hundred students in two school years. The work aims on connection of the area with the city. It solves objects themselves, tries to find accurate usage of them, for example commersial premises, student housing and so on. All this is united with the concept of „union“, which goes throught the whole area and tries to create simple a most of all plesant public places. The school – building of former spinning factory – disclose it’s strenght in it‘s open space, when the whole structure of the building is visible. I came from this conviction into my project, that agreed with my image of open shool. I wanted to design a school, where students could create together, where they would have review of the whole space, about other students. Tuitions would become public matter, where everybody could join.
|
|
|
NEW BUILDINGS FOR BROWNFIELDS IN HISTORICAL CENTRAL ZONE OF BUČOVICE CITY
Soviš, Vladimír ; Plášil, Jiří (referee) ; Boháč, Ivo (advisor)
This diploma thesis deals with the urban-architectural study of a new residential location on the place of the former area of the artistic-industrial enterprises in Bučovice. It is a brownfields near the Bučovice castle in the historic central zone of the town. The proposal focuses on the urban-architectural solution of the whole area including the conceptual consideration which responds to the possibilities and limits of the development of the industrial complex with a focus on the new building and architectural neoplasm in the historical surroundings.
|
|
|
The Compact urban structure in the Czech Republic
Kopačka, Daniel ; Erben, Adam (referee) ; Pavlovský, Tomáš (advisor)
Moravský Krumlov, historical core, urban district, industrial area, river, public space, urbanism, structure, corner, square, street, chapel, park
|
|
|
The Compact urban structure in the Czech Republic
Sobotková, Pavla ; Erben, Adam (referee) ; Pavlovský, Tomáš (advisor)
The theme of this thesis is the design of a new urban structure that fits into the context of its surroundings. The area is located in the centre of Moravský Krumlov. It is a historical part of the town with a castle and a castle park, located in the meander of the Rokytná River. At the end of the Second World War it was largely bombed out and subsequently rebuilt. The main problem is the adjacent industrial area, low density of buildings and non-functioning public spaces. In the design I focused on creating a new development structure on the site of the current industrial area, completing the existing historic development and creating new functional public spaces.
|
guest ::
