|
VUV spectrometer for vacuum interaction chamber
Drobil, Tomáš ; Šerý, Mojmír (referee) ; Novotný, Jan (advisor)
This thesis deals with the design of a VUV spectrometer for the Laser-induced breakdown spectroscopy (LIBS) method. A prototype using commercially available components was designed and tested. In addition to the actual development of the optical and mechanical design and the selection of the detector, a thorough research of elements emitting in the VUV region was carried out.
|
|
Study of plasmachemical reduction of corrosive layers on brass
Řádková, Lucie ; Selucká, Alena (referee) ; Krčma, František (advisor)
The main topic of this bachelor thesis is plasmachemical treatment of archeological artifacts, especially plasma chemical treatment of brass corrosion layers. Low-pressure, low-temperature hydrogen plasma is used for this process. Nowadays, the technology is used mainly for iron or silver based materials but even for them the optimal conditions for the corrosion removal are not fully known yet. The knowledge about other metallic materials is fully missing. Two sets of brass samples were prepared in different corrosion atmospheres. The first atmosphere was prepared using saturated vapors of HCl. The samples were in this atmosphere during one month, and corrosion layers were orange-brown. The second set was prepared using ammonium solution, the samples were in this atmosphere for one day, corrosion layers were blue. The generation of capacitively coupled plasma in continuous mode by different supplied power was done. The experiments were carried out at 100 Pa with hydrogen gas flow of 50 sccm. Discharge power was varied in the interval 50 – 200 W and the treatment duration was 70 – 140 min. The optical emission spectroscopy of OH radical was used to find out all changes those have been resulting from plasmachemical reactions. The OH radical integral intensities were observed, they were used to monitoring plasma chemical reduction process. Spectral intensity of spectroscope was in the range 290 – 330 nm. After the plasmachemical treatment, it was very difficult to remove corrosion layers of HCl, but removing of NH3 corrosion layers was easy. It was caused by type of corrosion process (corrosion layers were influenced by time of corrosion process). This bachelor thesis is the start to find out conduct corrosion layers of brass in plasma treatment. In future, plasma treatment could be used to treatment of real archaeological artifacts.
|
|
Study of processes during the organosilicone thin films deposition
Flamíková, Kristýna ; Rašková, Zuzana (referee) ; Krčma, František (advisor)
The aim of this work is plasma diagnostic during the deposition of thin films based on organosilicone compounds. Tetravinylsilane (TVS) was used in this study; the optical emission spectroscopy was applied for the diagnostics. The theoretical part of this work gives a basic fundaments of optical emission spectroscopy and brings the procedures for rotational, vibrational, and electron temperature calculations. The deposition process was carried out in pulsed regime with duty cycle 1:4 to 1:499. The pure TVS and TVS containing 10, 40 and 80 % with total gas mixture flow rate of 0.5 sccm were used during the deposition. The hydrogen atomic lines and many rotational lines of molecular hydrogen were identified in the spectra. Besides them, the molecular band of SiH, CH and C2 were observed. The atomic oxygen lines and continuum with a maximum at 550 nm were recorded in the case when oxygen was added. The rotational temperature calculated from 0-0 CH band was in the range 1700 - 2100 K depending on the discharge conditions. The electron temperature of about 1800 K was calculated from hydrogen atomic lines. The experimental results showed the partial plasma composition and some plasma basic characteristics were obtained.
|
|
Diagnostic of nitrogen post-discharge by optical emission spectroscopy
Kabeláčová, Kateřina ; Slavíček,, Pavel (referee) ; Mazánková, Věra (advisor)
The aim of this thesis is diagnose post-discharge nitrogen plasma with optical emission spectroscopy. There is long interest of investigated of nitrogen post-discharge plasma and study how to use it in theory as well as in practice. All results were measured with method of optical emission spectroscopy of post-discharge plasma. Discharge was generated by direct-current voltage generator with flowing regime. In this thesis was used for different series of experiments. First experiment was performed with adding water vapour into argon plasma. Measuring was processed at constant current 140 mA, voltage 1.5 V and pressure 1 000 Pa. It was changed flow rate and for each individual flow rate was measured in range 1–25 cm from end of active discharge. Second experiment was with adding nitrogen into argon plasma. Measuring was processed at constant current 140 mA, voltage 1.5 V and pressure 1 000 Pa. We were changing flow rate of nitrogen (0,2 sccm, 0,4 sccm and 0,8 sccm). For each individual flow rate was same experiment with changing distance from active discharge. Third experiment was about adding mercury vapour into nitrogen post-discharge. Measuring was processed at constant current 120 mA, voltage 3.5 V and pressure 1 000 Pa. Measuring was performed with two configuration: with diaphragm and without it. Last experiment was about adding air into argon plasma. Measuring was processed at constant current 140 mA, voltage 1.0 V and pressure 1 000 Pa. Temperature of outer face of tube was measured by thermocouple and infrared thermometer, was measured for last two experiments (argon – air and nitrogen). During experiments with pure nitrogen was visible phenomenon called pink afterglow which is manifested by noticeable increase pink coloration. Optical emission spectrums post-discharge was take at various range of wavelength. At argon with water vapour was 280–600 nm and at adding nitrogen into argon was at range 320–500 nm. At added mercury vapour into nitrogen was 320–600 nm. For experiment argon – air was wavelength range 320–600 nm. From results of experiments were designed dependencies of calculated intensity from measured spectra on distance from active discharge. Also were constructed dependencies of measured temperature on distance from active discharge.
|
|
Diagnostics of plasma generated in water solutions and its application
Holíková, Lenka ; Brablec, Antonín (referee) ; Kozáková, Zdenka (advisor)
This thesis deals with the study of parameters of diaphragm discharge in liquids. NaCl solution of different conductivity was used as a conductive medium. Conductivities were adjusted in the range from 220 to 1000 µS cm-1. Two diagnostic methods were used for the study of plasma parameters. The first one was employed in the laboratory of plasma chemistry at Faculty of Chemistry, Brno University of Technology, namely the optical emission spectroscopy. The second method used for plasma diagnostics was the time resolved ICCD camera at the Laboratoire de Physique des Plasmas at the École Polytechnique in Paris. The reactor for the diagnostics by optical emission spectroscopy had the volume of 4 l, and it was made of polycarbonate. PET diaphragm was placed in the barrier separating the cathode and the anode space. Electrodes were made of titanium coated with platinum. Electric power source supplied a constant DC voltage of maximum 5 kV and electric current up to 300 mA. Spectrometer Jobin Yvon TRIAX 550 with CCD detector was used during the experiments in order to measure overview spectra within the range from 200 to 900 nm as well as OH molecular spectra and Hß line spectra. All spectra were scanned in both discharge polarities, i.e. at the cathode and the anode part of reactor. The basic parameters of the discharge plasma were calculated from the spectra, that means rotational and electron temperature and electron density. Another part of experiment consisted of measurements by the ICCD camera iStar 734. Two types of reactors were used. The first one was the same as the reactor for the measurements by the optical emission spectroscopy. The second one was also made of polycarbonate, but the volume of conductive solution was 110 ml, only. HV electrodes made of stainless steel were placed in this reactor. Ceramic diaphragm (Shapal-MTM) was used in both reactors. Diaphragms had different thickness and diameter of holes. ICCD camera acquired photographs with details of processes of the bubbles generation and discharge operation (propagation of plasma channels), depending on solution conductivity, dimensions of the diaphragm, and with respect to the electrode part of the reactor.
|
|
Corrosion layers removal in low-pressure plasma
Kujawa, Adam ; Grossmannová, Hana (referee) ; Krčma, František (advisor)
A plasmachemical reduction of corrosion layers on copper was studied. In this case two series of copper samples were prepared and putted in two corrosive environments for one week. The first corrosive environment contained a concentrated nitric acid and the second environment contained a concentrated sulfuric acid. Samples thus prepared were ready to be plasmachemicaly treated. The plasmachemical reductions took place in low-temperature, low-pressure, non-isothermal, high-frequency-inducted hydrogen plasma on the Faculty of Chemistry in University of Technology in Brno. The discharge was generated in continual or pulse mode with changeable pulse ratio. To monitor the reduction process an optical emission spectroscopy was used. The radiation from plasma discharge was measured by an optical spectrometer in the intervals of 1 to 10 minutes. An object of our concern in collected spectrum was the radiation of OH radicals with electromagnetical wavelenght in a range of 305 – 330 nm, and which were produced in a reaction between the hydrogen radicals and the oxygen atoms, contained in the corosion layers. A rotation temperature of plasma was calculated from the spectrums of OH radicals in a dependence of discharge conditions. Gathered findings will give us a better knowing of this conservation technique, that is used for treatment of the corroded surfaces of the archeological artifacts, and will also allow more provident appliance of this method on a copper historical objects.
|
|
Preparation and characterization of plasma activated water for bio applications
Lemonová, Hana ; Matěj,, Klas (referee) ; Krčma, František (advisor)
The aim of this master thesis is the preparation and characterization of plasma activated water (PAW) prepared by dielectric barrier discharge at atmospheric pressure in air for the future applications in agriculture and medicine. The theoretical part is focused on plasma activated water and its effects on seeds and plants. The work also deals with the preparation and application of PAW in the world. Various types of plasma discharge configurations suitable for its preparation are described here. In the experimental part of the master thesis, distilled and tap water were chosen for activation. The concentrations of active particles in PAW generated by DBD such as nitrites, nitrates and hydrogen peroxide were determined. The value of the concentration of active particles changes probably due to mutual interactions when nitrites are oxidized by hydrogen peroxide to nitrates. Physical properties of PAW such as conductivity and pH were also characterized. After the preparation of PAW, the conductivity increases due to the increase in the concentration of active particles formed by dissociation and ionization of water molecules by plasma. The particles presented in the air, which are dissociated and ionized by plasma, also diffuse into the liquid, and contribute to this increase. The decrease in pH also corresponds to an increase in the concentration of hydrogen ions and the formation of nitric acids. Another aspect of this work was to study plasma activated water during the first eight hours after its preparation and to determine its properties. We have found that PAW prepared from tap water retains its characteristic properties for at least 8 hours and distilled water for 6 hours. In the master thesis, the analysis of plasma discharge was performed using optical emission spectroscopy. OES measurements were performed in the wavelength range 300 to 800 nm. The second positive nitrogen system (N2 (C 3u) N2 (B 3g)) and the first positive nitrogen system (N2 (B 3g) N2 (A 3+u)) were identified in the overview spectrum. Molecular nitrogen ions, OH· radicals, atomic oxygen and atomic hydrogen can be observed in the spectrum, too. The dielectric barrier discharge was also captured using a high-speed camera, and the recording shows the occurrence of multiple discharges that are spatially as well as temporary unstable.
|
|
Reduction of brass corrosion layers using hydrogen plasma
Řádková, Lucie ; Grossmannová, Hana (referee) ; Krčma, František (advisor)
The main topic of this Diploma thesis is the application of low-pressure low-temperature hydrogen plasma for the treatment model samples of rusted brass. Plasmachemical treatment of metallic artifacts is a relatively new way how to remove corrosion of artifacts. The temperature of an object should not exceed 150 °C during the treatment. Corrosion layers were prepared in an ammoniac corrosion atmosphere. The corrosion formation took two weeks. Energy Dispersive X-ray Microanalysis has shown that the corrosion layer was formed by carbon, oxygen, copper, zinc, and lead. The corrosion layers were blue-colored with white crystals on the surface. Except those two colors, brown color was observed on corrosion layers, too. The plasma reactor was a quartz tube with outer copper electrodes and supplied by the RF source of 13.54 MHz. The reactive atomic hydrogen was formed in plasma discharge. This atomic hydrogen reacted with the corrosive layer containing oxygen. This reaction created an unstable OH radical, which emitted light in the region of 305–320 nm. This radiation was detected by the optical emission spectroscopy and it was applied as process monitoring quantity. Rotational temperature and intensity of OH radicals were determined from obtained data. The sample temperature was measured by thermocouple installed inside the sample volume. Rusted samples were treated by low-pressure low-temperature hydrogen plasma. 16 samples were treated at different conditions – plasma power was 100 W, 200 W, 300 W, and 400 W at continuous mode and pulse mode with duty cycle of 25 %, 50 %, and 75 %. The pressure was between 140–160 Pa at hydrogen flow rate of 50 sccm. Samples after plasmachemical treatment were grey colored with white crystals on their surface. Corrosion layers were removed by spatula. The corrosion layers of some samples were easy removable, some others were difficult. Energy Dispersive X-ray Microanalysis, which was carried out after the treatment of 2 selected samples (400 W, 50% pulse mode and 400 W, 75% pulse mode), showed different amounts of carbon, oxygen, copper, zinc, and lead compared to the rusted sample. Other elements in the treated layer were silicon, sulfur, chlorine, and fluorine.
|
|
Optical emission spectroscopy of the nitrogen post-discharge plasma with metal trace impurity
Bocková, Ivana ; Mazánková, Věra (referee) ; Krčma, František (advisor)
The bachelor´s thesis deals with the optical emission spectroscopy of the nitrogen post-discharge with metal trace impurity. The analysed sample introduced to the low-temperature plasma was zinc vapor and stannic chloride. As a diagnostic method was choosen optical emission spectroscopy as one of the simplest plasma diagnostic methods. The teoretical part is aimed to information about plasma and processes in the plasma. The special focus is deald for post-discharged plasma and the optical emission spectroscopy. Measurement itself is implemented in flowing regime of DC post-discharge under low pressure. The intensities of selected nitrogen bands and atomic lines are observed as a function of metal vapor presence. The simplified mechanism of the observed phenomen is presented. The possible excitation mechanisms are shown of metallic atoms during the post-discharge.
|
|
Study of post-discharge in N2-H2 mixtures
Zedníčková, Petra ; Mazánková, Věra (referee) ; Krčma, František (advisor)
The presented Thesis deals on the nitrogen-hydrogen DC post-discharge observations by optical emission spectroscopy. The plasma was generated in Pyrex tube in flowing regime at pressure of 1 kPa at discharge current of 100 mA. The optical emission spectra were recovered at discharge times up to 50 ms in nitrogen containing 0 – 92 % of hydrogen; the gas mixture volume, i.e. the gas speed in the system was conserved for all mixtures. The experiments were carried out at two reactor wall temperatures at the spectra collecting point – at ambient temperature and at the wall temperature of liquid nitrogen (temperature in plasma was about 150 K). The nitrogen first and second positive and first negative spectral systems were identified in the spectra, the hydrogen atomic Balmer series lines were recorded, too. No molecular hydrogen emission was determined during the post-discharge. Some non-identified bands (but with high probability bands of nitrogen Herman infrared system) at 690 and 780 nm were detected, too, mainly at low temperature. The intensities of all determined radiating species decreased exponentially or more than exponentially with the decay time. The experimental data showed strong quenching of all nitrogen radiative states even at very a few percent hydrogen additions. The shape of the selected intensity dependencies on both hydrogen concentration, and the decay time are nearly the same for N2(C) and N2+(B) states, dependencies for N2(B) levels differs of them. The hydrogen line emission was nearly independent on the hydrogen content in the gas mixture up to about 50%, at highest hydrogen concentrations it slightly increased. The results obtained at the decreased wall temperature were very similar, only intensities of all nitrogen spectra increased by the factor about 3, the intensities of levels populated by the recombination of nitrogen atoms increased by factor about five. The atomic hydrogen alpha line (at 656 nm) was the most sensitive on temperature decrease; its intensity increased over one order in whole observed time interval. The obtained results will be confronted with numeric model of kinetic processes in the near future. After that, the specific conditions applicable for the technological applications of nitrogen-hydrogen gas mixtures under post-discharge conditions will be proposed.
|