|
|
Influence of Process Parameters and Heat Treatment on the Structure and Properties of Cold Spray Method
Lindner, Patrik ; Řehořek, Lukáš (referee) ; Hutařová, Simona (advisor)
The bachelor thesis is a research of the state of knowledge focused on Cold spray technology and process parameters affecting the properties of coating, such as pressure, temperature, nozzle speed, sequence of individual layers, size of powder and others. This technology uses the kinetic energy of the impact of particles on the substrate. The main advantage of this method is possibility of forming a coating of large thicknesses (in millimeters) without oxides, with relatively low porosity and favourable mechanical properties. Aim of this work is to get acquainted with the Cold spray technology and the influence of process parameters on the quality of the spray. The influence of process parameters on properties is also demonstrated by own experimental results.
|
|
|
Strucure and mechnical properties of cold sprayed Ti-6Al-4V layer
Sabela, Jakub ; Zelený, Martin (referee) ; Řehořek, Lukáš (advisor)
Diploma thesis deals in the first part with recent knowledge of cold spray, its mechanism and parameters of deposition, advanced coatings made by cold spray and their applications, knowledge of Ti-6Al-4V coatings and their heat treatment. Deposit of Ti- 6Al-4V powder was made by cold spray process. In experimental part, microstructure and mechanical properties of supplied and its heat treated material were observed and examined. Mechanical properties and microstructure remained unchanged by annealing at 600 °C as in the case of supplied material. Recrystallization occured in microstructure of and phases by annealing at 800 °C. Grains were emerged in microstructure and mechanical properties were decreased. Mechanical properties were improved by annealing at 900 °C due to quenching. Microstructure consists of and ’ phases. Mechanical properties were the worst for annealed material at 1000 °C because of coarsed grains. Material which was annealed at 800 °C, quenched and precipitation hardened had the best microstructure and mechanical properties.
|
|
| |
|
|
Influence of Process Parameters and Heat Treatment on the Structure and Properties of Cold Spray Method
Lindner, Patrik ; Řehořek, Lukáš (referee) ; Hutařová, Simona (advisor)
The bachelor thesis is a research of the state of knowledge focused on Cold spray technology and process parameters affecting the properties of coating, such as pressure, temperature, nozzle speed, sequence of individual layers, size of powder and others. This technology uses the kinetic energy of the impact of particles on the substrate. The main advantage of this method is possibility of forming a coating of large thicknesses (in millimeters) without oxides, with relatively low porosity and favourable mechanical properties. Aim of this work is to get acquainted with the Cold spray technology and the influence of process parameters on the quality of the spray. The influence of process parameters on properties is also demonstrated by own experimental results.
|
|
| |
|
|
Strucure and mechnical properties of cold sprayed Ti-6Al-4V layer
Sabela, Jakub ; Zelený, Martin (referee) ; Řehořek, Lukáš (advisor)
Diploma thesis deals in the first part with recent knowledge of cold spray, its mechanism and parameters of deposition, advanced coatings made by cold spray and their applications, knowledge of Ti-6Al-4V coatings and their heat treatment. Deposit of Ti- 6Al-4V powder was made by cold spray process. In experimental part, microstructure and mechanical properties of supplied and its heat treated material were observed and examined. Mechanical properties and microstructure remained unchanged by annealing at 600 °C as in the case of supplied material. Recrystallization occured in microstructure of and phases by annealing at 800 °C. Grains were emerged in microstructure and mechanical properties were decreased. Mechanical properties were improved by annealing at 900 °C due to quenching. Microstructure consists of and ’ phases. Mechanical properties were the worst for annealed material at 1000 °C because of coarsed grains. Material which was annealed at 800 °C, quenched and precipitation hardened had the best microstructure and mechanical properties.
|
|
|
Contact between end coils of cylindrical helical compression springs
Nekoksa, Pavel ; Grulich, Tomáš (referee) ; Kašpárek, Jaroslav (advisor)
This diploma thesis deals with hot-formed helical compression springs. The first part of the thesis describes related problems and determines market potential. Following theoretical part describes the influence of contact line on behaviour of springs and compares it with normative regulations. Methods suitable for determination of helix shape are covered in the next part. The last part focuses on practical measurement, in which the change of helix shape during manufacture was observed. The main output of this diplomat thesis is suggestion of measures that should contribute to both optimization of manufacture and verification of FEM model.
|
guest ::
