|
|
Steam boiler for burnig mix of wood and sub-bituminous coal(mixing 50/50).35t/h
Chmelíček, Jiří ; Kohout, Přemysl (referee) ; Skála, Zdeněk (advisor)
This master´s thesis deals with the constructional and calculation design of the boiler for burning wood and sub-bituminous coal. The work is divided into several parts. First, stoichiometrics calculation and enthalpy calculations of air and flue gas are performed. It is calculated heat balance of the boiler, the boiler losses and the thermal efficiency of the boiler is determined. After designing the combustion chamber thermal calculation is made. Then, the dimensions and individual heating surfaces are proposed. At the end of the calculations are controlling the overall energy balance.
|
|
|
Design HRSG 0,8Nm3/s, 450°C
Hatiar, Peter ; Kól, Přemysl (referee) ; Skála, Zdeněk (advisor)
This master’s thesis deals with the issue of design heat recovery steam generator. In the first part is realized calculation of stoichiometry and further the thermal balance of the boiler. The boiler was divided on the basis of thermal analysis in two heating surfaces that have been designed separately. The thesis also includes structural design and drawings of evaporator, economizer and their compilation.
|
|
| |
|
|
Steam Boiler with grate firing RDF 70t/h, 4MPa, 400°C
Mokriš, Lukáš ; Kohout, Přemysl (referee) ; Skála, Zdeněk (advisor)
The goal of this Master’s Thesis is to design a refuse derived fuel (RDF) fired steam boiler with 70 t/h processing ability. The assignment consists of requested output parameters of overheated steam and analysis of fuel components. This analysis was used for stoichiometric calculation of fuel. Furthermore, heat balance of the boiler was calculated, from which was determined the heat loss and the efficiency of the boiler. Individual designs and calculations of heating surfaces and boiler dimensions were carried out from requested output parameters.
|
|
|
Steam boiler for straw 10t/h, 320°C
Truhlář, Marek ; Kól, Přemysl (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is design a grate steam boiler for burning straw with an output of 10 tons of steam per hour. The produceds team has parameters 320 °C, 3,2 MPa. For a given fuel (fytomass) is calculated stoichiometric calculation. The following is the calculation of the heat balance of the boiler including the determinativ of thermal efficiency. The fuel used, the required parameters of steam and feed water temperature are designed individual convective surfaces and dimensions of the boiler. The boiler design includes drawings.
|
|
|
Design of the steam generator for modular reactor
Černý, Marian ; Baláš, Marek (referee) ; Šen, Hugo (advisor)
Subject of this thesis is design of the steam generator for modular reactor. The dissertation consist of the theoretical part, where are described heat-exchangers and steam generators used in nuclear power plants. Second part contains theoretical calculations in the first approach (thermal, hydraulic and strenght calculation). In the next part are particular variants of steam generator selected. For the final variant are necessary calculations (introduced above) and drawings of selected parts are done. In the final statement is technical solution evaluated, and the parameters of the steam generator are compared with actually used steam generators.
|
|
|
steam boiler for woody biomass 88t/h
Lučko, Martin ; Ing.Milan Ryšavý (referee) ; Skála, Zdeněk (advisor)
The aim of the work is to design a plain wood combustion boiler of 88 t/h output. Fuelling component analysis has been added to the basic boiler parameters. For given fuel is prepared stechiometric calculations. After making the heat balance of boiler is determined the thermal efficiency. For given output of steam parametrs (temparature, pressure, volume) are designed individual convective surfaces and dimensons of the boiler. It is also made drawings.
|
|
|
Steam boiler for wood burning 40t/h
Mach, Ondřej ; Křemínský, pavel (referee) ; Skála, Zdeněk (advisor)
The purpose of this Diploma Thesis is the construction design of the steam-boiler for the combustion of biomass – wood pellets. For the specified parameters have been defined stoichiometric calculations and calculations enthalpy burnt gas. In sequence, there is designed and solved the configuraion of the steam-boiler, so that the result design and the number of the heat-delivery surfaces can be determined, in dependence on the required inlet parametres of the air and outlet parametresof the water vapour. These parametres mean the amount, the temparature and the pressure. The aim of the thesis is to make a design of the steam.boiler burning biomass according to the set parametres. This very ecological fuel can really substitute the fossil fuel and friendly respect the environment.
|
|
|
Steam boiler for spruce bark burning-18t/h
Dračka, Lukáš ; Heinze, Bedřich (referee) ; Skála, Zdeněk (advisor)
To design a grate boiler with a natural circulation for burning of a pine bark with an output 18t/h is a primary objective of this dissertation. Individual parts of a boiler and it´s heat transfering surfaces were calculated after the working out of stoichiometric calculations from given element analysis of fuel. All computations have to fulfill several parameters: boliler output, temperature and pressure of an overheated steam.
|
|
|
Change John Thomson boiler fuel base
Hradecký, Martin ; Lisý, Martin (referee) ; Baláš, Marek (advisor)
This Thesis deals with thermal control calculation of the existing John Thomson steam boilers burning heating mazut and subsequent thermal conversion to natural gas. The main parts of the calculation are as follows: stoichiometry, thermal balance, conversion of the combustion chamber and heating area.
|
guest ::
