|
|
Analysis of the surface after laser cutting
Narovec, David ; Sedlák, Josef (referee) ; Osička, Karel (advisor)
This diploma thesis discusses laser cutting and the consecutive surface treatment of cut parts. The theory of laser cutting is described in the first part of this thesis, including laser history and the laser emergence principle. Cut parameters and the influence of the laser cutting on the material are described later on. The next part describes the laser cutting technological possibilities and other laser technology utilization options are outlined. In the last theory part, metal surface treatment used in the experiment is covered. Coating thickness is evaluated in the practical part of this thesis, as well as roughness, microhardness, chemical microanalysis and metalography. The evaluation of the results achieved, and optimal surface treatment execution suggestions are addressed in the last part of this thesis.
|
|
|
Cutting force analysis when tapping
Štokman, Michal ; Sedlák, Josef (referee) ; Píška, Miroslav (advisor)
This master‘s thesis deals with cutting force analysis when tapping. This thesis includes basic methods of manufacture of threads, physical fundamentals of the cutting process, PVD coatings, tool materials, analysis and assessment of the testing nut taps with the application of PVD coatings.
|
|
|
On the increase of cutting performance of thread cutting taps with PVD coatings
Grygárek, David ; Fiala, Zdeněk (referee) ; Píška, Miroslav (advisor)
This diploma thesis deals with HSS cutting taps performance in combination with very hard and tribological PVD coating application and their contribution to increasing of cutting properties. Then is described the mechanisms and forms of cutting tool wear. The goal of the experimental part of the thesis was determine, compare and subsequently evaluate cutting properties of threading tools using taps with different types of PVD coatings. During realization of the experiment, constant cutting conditions have been ensured and the only variable were the different types of coating layers. The result of the experiment was measurement of cutting torques depending on time and rate of wear of cutting tools. Measured value are statistically processed and drawn conclusion.
|
|
|
Coating methods for cutting tools
Tuna, Jaroslav ; Prokop, Jaroslav (referee) ; Humár, Anton (advisor)
This diploma thesis is aimed on methods of the coating cutting material (cemented carbide, cermets, cutting ceramic, super hard materials) and evalutation individual method regarding technological posibilities of deposition of hard coatings a their mechanical, thermal and che-mical properties. The task of the work is full elaboration obtained technical knowledges and mainly evalutation a comparison of the work conditions (kind of the cutting materials, cutting conditions) that selected producers recomended for effective turning aplications of the coa-tings cutting materials.
|
|
|
The Analysis of Carbide Cutting Inserts.
Pavelka, Rudolf ; Humár, Anton (referee) ; Osička, Karel (advisor)
This study states basic technological aspects of metal machining with cutting inserts, with special stress on coated carbide cutting inserts. Among others, it states wear-out theory incl. wear-out accompaniments, problems of chip-forming and other factors of metal machining. At the end of the study, it contents a description of the latest cutting materials and construction elements of cutting inserts from reputable producers and, for some of them, also the course and the results of practical tests and comparison.
|
|
|
Application of PVD coatings for milling
Matuška, Martin ; Sedlák, Josef (referee) ; Píška, Miroslav (advisor)
This dissertation treats of the influence of PVD coats to a change of tool lifetime. The theoretical part of the dissertation describes the adjustment of tools before the process of coating. Following part describes the specific properties of deposited layers of the coating and its measuring. There is also the enumeration and specification of selected ways of depositing PVD coats and brief description of its advantages and disadvantages. Second part of the dissertation is focused on an experiment with measuring of the tool force loading and its change depending to the tool wear. There are compared four short four-edged milling cutters with a coat and as well without it. Those tools were made of high speed steel by the conventional way and also by the powder metallurgy. Milling operation was done by down and up milling technique. The evaluation of the experimental results for powder metallurgy tools confirmed that these tools are advantageous compared to the standard high speed steel tools.
|
|
|
Application of PVD coatings for face milling
Jaroš, Aleš ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
Diploma thesis is focused on the application of PVD coatings for face milling. The theoretical part, systematically, deals with the division of coating methods. PVD method is stressed here. Treatment of material before coating is described as well. The machine, the machine tool and cutting material is described in the experimental section. The aim of the work was comparison of coating exchangeable cutting tips (VBD) to uncoated ones. Based on experiment, it is clear that the use of PVD coatings resulted in reduction of cutting powers and lifetime was increased.
|
|
|
Enhancement of HSS tools cutting performance with PVD coatings
Medek, Martin ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
Diploma work describes speed drill steels and its qualities before and after coating by methods PVD (Physical Vapour Deposition). The theoretic part is concerned with thermic processing of speed drill steels and their qualities with regard to individual alloying elements contained and its mechanical features. Second part of the theoretic part is concerned with particular methods of coating by the help of PVD technologies, kinds of coating with regard to additional elements and their qualities and surface treatments of coated material before and after its coating. The goal of the experimental part was the confrontation of cutting power features of cylindrical four-fluted face mills with straight shank, from speed drill steels non-coated and coated in two basic modes of milling – down-feed method and upfeed method. The results of measurements were interpreted by the help of four basic pictures (source values, power analysis, specific values). The result of all the experiment is that the application of PVD coatings enabled the increasing of cutting speed (with preservation of other cutting requirements) and led to decreasing of cutting force and cutting enforcements and extended durability of cutters.
|
|
|
Modern cutting cemented carbide tools
Vopařil, Josef ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
This thesis is focused on cutting tools made of cemented carbides. It contains analysis of cemented carbides for uncoated and coated cutting tools. It contains examples of modern tools for turning, milling and drilling. Practical part of this thesis evaluates and compares cutting properties of two types of spiral drills.
|
|
| |
guest ::
