|
|
Steam boiler with natural cirkulation for wood cheaps burning
Vaculík, Jaroslav ; Kohout, Přemysl (referee) ; Kohout, Přemysl (referee) ; Skála, Zdeněk (advisor)
The purpose of this Diploma Thesis is the construction design of the steam boiler with natural circulation for the combustion of wood biomass according to the specified parameters. It is the boiler with the power of 12 tons per hour of superheated vapor output parameters of 3,3 Mpa at a temperature of 400 °C and a temperature of feed water 105 °C. For the specified parameters I first calculated the stoichiometric calculations, boiler efficiency, and followed by using geometrical parameters of the blocks and thermal calculations set design and the number of heat transfer surfaces, depending on the input parameters of the air and water and output parameters of vapor. The work also includes drawings of the boiler.
|
|
|
Stean boiler for sub bituminous coal, steam parametres 235 t/h, 14 MPa, 540°C
Horák, Stanislav ; Moskalík, Jiří (referee) ; Baláš, Marek (advisor)
The aim of the work is to design a brown coal combustion boiler of 235 t/h output. The work is divided into several parts. First, stechiometric calculations and calculations enthalpy of air and flue gas are performed. It is calculated heat balance of the boiler, the boiler losses and the thermal efficiency of the boiler is determined. After designing the combustion chamber thermal calculation is made. Then, individual heating surfaces are proposed and at the end of the calculations are controlling the overall energy balance of the boiler. For calculation was design documentation added.
|
|
|
Steam boiler for waste burning 40t/h
Fejfuša, Martin ; Kohout, Přemysl (referee) ; Skála, Zdeněk (advisor)
This thesis deals with a project of steam boiler to combustion of refused-derived fuel. With respect of required fuel and output parameters of the steam was worked out stoichiometry, energy loss and boiler efficiency, heat flows was allocate to individual heat exchange surfaces. The heat exchange surfaces was calculate and project in detail.
|
|
|
Steam boiler for burnig mix of wood and sub-bituminous coal(mixing 50/50).35t/h
Chmelíček, Jiří ; Kohout, Přemysl (referee) ; Skála, Zdeněk (advisor)
This master´s thesis deals with the constructional and calculation design of the boiler for burning wood and sub-bituminous coal. The work is divided into several parts. First, stoichiometrics calculation and enthalpy calculations of air and flue gas are performed. It is calculated heat balance of the boiler, the boiler losses and the thermal efficiency of the boiler is determined. After designing the combustion chamber thermal calculation is made. Then, the dimensions and individual heating surfaces are proposed. At the end of the calculations are controlling the overall energy balance.
|
|
|
Steam boiler for straw 10t/h, 320°C
Truhlář, Marek ; Kól, Přemysl (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is design a grate steam boiler for burning straw with an output of 10 tons of steam per hour. The produceds team has parameters 320 °C, 3,2 MPa. For a given fuel (fytomass) is calculated stoichiometric calculation. The following is the calculation of the heat balance of the boiler including the determinativ of thermal efficiency. The fuel used, the required parameters of steam and feed water temperature are designed individual convective surfaces and dimensions of the boiler. The boiler design includes drawings.
|
|
|
steam boiler for woody biomass 88t/h
Lučko, Martin ; Ing.Milan Ryšavý (referee) ; Skála, Zdeněk (advisor)
The aim of the work is to design a plain wood combustion boiler of 88 t/h output. Fuelling component analysis has been added to the basic boiler parameters. For given fuel is prepared stechiometric calculations. After making the heat balance of boiler is determined the thermal efficiency. For given output of steam parametrs (temparature, pressure, volume) are designed individual convective surfaces and dimensons of the boiler. It is also made drawings.
|
|
|
Steam boiler for wood burning 40t/h
Mach, Ondřej ; Křemínský, pavel (referee) ; Skála, Zdeněk (advisor)
The purpose of this Diploma Thesis is the construction design of the steam-boiler for the combustion of biomass – wood pellets. For the specified parameters have been defined stoichiometric calculations and calculations enthalpy burnt gas. In sequence, there is designed and solved the configuraion of the steam-boiler, so that the result design and the number of the heat-delivery surfaces can be determined, in dependence on the required inlet parametres of the air and outlet parametresof the water vapour. These parametres mean the amount, the temparature and the pressure. The aim of the thesis is to make a design of the steam.boiler burning biomass according to the set parametres. This very ecological fuel can really substitute the fossil fuel and friendly respect the environment.
|
|
|
Change John Thomson boiler fuel base
Hradecký, Martin ; Lisý, Martin (referee) ; Baláš, Marek (advisor)
This Thesis deals with thermal control calculation of the existing John Thomson steam boilers burning heating mazut and subsequent thermal conversion to natural gas. The main parts of the calculation are as follows: stoichiometry, thermal balance, conversion of the combustion chamber and heating area.
|
|
|
Steam boiler with wood grate firing
Jakeš, Pavel ; Skála, Zdeněk (advisor)
This diploma thesis deals with proposal of the steam boiler on combustion uncontaminated wood. For the specified parameters have been implemented stoichiometric calculations and calculations enthalpy burnt gas. In the next part have been dealt with heat balance of the boiler, the efficiency of the boiler, design of the combustion chamber and calculation of particular rating surfaces. The output parametres are temperature, pressure and the amount of steam.
|
|
|
Aspect of reliability in compatibility evaluation of products
Šenkýř, Michal ; Kovář, Miroslav (referee) ; Koška, Petr (advisor)
The diploma thesis deals with stating the aspects of reliability in product compatibility evaluation, namely with stating result uncertainty in product parameters testing and diagnosis which are imperative for introduction of the product to the market. The practical part of the thesis focuses on stating selected uncertainty in warm-water boilers testing, especially in gas fueled boilers with rated thermal input of max. 70 kW.
|
guest ::
