|
|
Measurement of the optical fiber
Procházka, Jakub ; Dostál, Otto (referee) ; Filka, Miloslav (advisor)
This bachelor's thesis deals with measurement methods of optical fiber. In the thesis, methods for measurements of attenuation, chromatical dispersion, and polarization mode dispersion are discussed. The thesis also deals with methods for measurement of attenuation of passive components and their reflections loss. Also discussed are parameters of selected types of optical fibers, basic findings about optical transmission and principle of wave multiplexing. The practical portion of the thesis deals with measurement of a new optical polygon in the Academic Optical Network in Brno.
|
|
|
Connecting the TV studios
Flimel, Peter ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
In this bachelor thesis work is done TV link study in 2020, for the purpose of mediation football matches between studies in Prague and Bratislava. This work deals with optical connections and technology matters to revel in the transmission of large amounts of data.
|
|
| |
|
|
The modulation techniques used in WDM optical networks
Lučenič, Lukáš ; Filka, Miloslav (referee) ; Kočí, Lukáš (advisor)
The main goal of the diploma thesis is DWDM simulation of optical network, defined by recommandation ITU-T. Optical network includes 16 communication channels with length of fiber 50 km. Each channel have to be set with bandwith 50GHz and Bit rate with minimal value 10Gbit/s. The final simulation model includes 8 types of modulation techniques. The result of the thesis is comparison modulation techniques in terms of usability of bandwith and comparison of the quality of transfer
|
|
|
Software defined networks
Flimel, Peter ; Smékal, Zdeněk (referee) ; Filka, Miloslav (advisor)
This diploma work describes the software-defined network focusing on optical networks. Subsequently designed their own software network that is implemented in the environment OMNeT ++. This work deals with SDN (software-defined network), and impact on current communications environment in the world of telecom-munications services.
|
|
|
Design of optical amplifier
Somora, Rastislav ; Číž, Radim (referee) ; Slavíček, Karel (advisor)
This Bachelor's thesis deals with design and construction of support circuits for a modern optical amplifier the SOA. In the first chapter, optical transmitting medium with its physical properties and types of used cabels is described. The overview includes a list of optical cables, their damping properties and parasitic effects which can occur durring comunication. Next chapter is focused on the optical signal sources used in modern data networks, describes their internal structure and physical essence. Third chapter is dedicated to designing the optical amplifier with the SOA circuit. It focuses on the right choice of parts, their arrangement and layout of the design. Last chapter deals with set up, calibration and control of the optical amplifier module.
|
|
|
Porting OpenVPN to Windows CE Platform
Ešner, Oldřich ; Ráb, Jaroslav (referee) ; Ryšavý, Ondřej (advisor)
The motivation for inception of this MSc. thesis which follows on from a term project of the same name was the transfer of the application for building private virtual OpenVPN networks from Windows XP operating system to Windows CE Embedded 6.0 platform. The project deals with virtual private networks in general and looks more closely at its implementation - OpenVPN. It also introduces the basic features of the Windows CE operating system. The project goes on to describe device drivers in NT-based Windows operating systems, the Windows Driver Model used, the NDIS network interface model and also the model of Windows CE drivers - the Stream Interface Model. The project continues with a~description of communication in OpenVPN application and primarily the role of TUN/TAP virtual network interfaces. This is followed by a proposal for transfer of TUN/TAP adapter drivers together with a description of limitations and necessary modifications between both platforms. As a result a TAP network device driver is implemented whose function is verified by test application that emulates the behaviour of a TUN adapter. The project concludes with an evaluation of the achieved results, the possibilities for further work on this theme and with the overall contribution of this project.
|
|
|
The Design of FTTH Network
Zorgani, Nagib Youssef ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The aim of this thesis is to explain the problems of optical access networks with wavelength division multiplexers, main purpose is to demonstrate the difference between theoretical and real measurement. The work is divided into several thematic areas. The introduction outlines the basic of telecommunications, fiber optics lasers, single mode, multimode, lasers fibers cables & cores, splitters division multiplexing system, there are known solutions discussed fundamental wavelength multiplexes and their possible combinations. The following chapter deals with the active elements such as AON, PON, which are essential part xWDM systems such as optical lasers, detectors and amplifiers. Another chapter focuses on passive elements, which form a key part of the wavelength multiplex. Methods of measurement of WDM/PON networks are discussed in the following part. The next section describes the topology used active and passive optical networks. The penultimate part of the work consists of architecture & technology of xWDM such as GPON and WDM-PON networks and comparing their transmission parameters. The final part of the paper presents the results of practical experimental measurements of optical access networks with wavelengths division multiplex while these results are compared with the theoretical output & methods of Optical lost test, OTDR & LSPM, with advantage & disadvantage of every methods. The second part of practical is the draft to the connection resident housing units of 30 houses, boarding-house (10 rooms) and 2 shops, 20 km distant from exchange. With comparing the possibilities of two options- passive and active optical network- PON system – WDM- Wave multiplex. Suggest the possibility of measuring and monitoring the created network.
|
|
|
The mutual conversion of the OTDM and WDM systems
Végh, Zoltán ; Šifta, Radim (referee) ; Münster, Petr (advisor)
The aim of the diploma thesis is to analyze the WDM and OTDM optical telecommunication networks and the possibility of conversion between these two multiplexing methods. In the first chapter were mentioned the basics of optical communication. The next chapter describes the optical fiber. Specifically, their types, linear and nonlinear optical characteristics whitch are limiting transmission e.g. attenuation, dispersion, refraction, FWM, SPM and XPM. Followed by a general description of the multiplexing systems used in optics and individual elements used in various multiplexing systems. The last chapter was devoted to the design of the OTDM - WDM conversion model.
|
|
|
Influence of phase optic sensor to the DWDM network
Čučka, M.
This article deals with influence of phase optic sensor to the DWDM transmission. In DWDM network we use four lasers sources for data transmission on one optical fiber. Next one DFB laser is used for phase optical sensor on the same optical fiber. This article is focused on influence of power DFB laser to the DWDM network. We changed the power of the DFB laser from-2 dBm to 35 dBm and watching the bit error rate and eye of the decision of the DWDM system. This model is simulated in RSoft Optsim.
|
guest ::
