|
|
Industrial Building - Review of Selected Reinforced Concrete Parts
Weber, Jozef ; Zlámal, Martin (referee) ; Švaříčková, Ivana (advisor)
Bachelor’s thesis deals with reinforced concrete floor structure. It is a 3D frame, which is composed of bar elements oriented in the longitudinal and transverse direction. The work is done calculating mean longitudinal beam and also the middle of the cross beam. Furthermore, the calculated floor structure, which operates in both directions. For the calculation of inner strength used computer program SCIA ENGINEER 2013.0, which operates on the Finite Element Method - FEM. All elements have been designed for ultimate and serviceability limit state. Work contains textual part, inner strength, static calculations, drawings and used documents.
|
|
|
D - Areas Analysis using Strut and Tie models
Konárek, Lukáš ; Hradil, Petr (referee) ; Zídek, Rostislav (advisor)
The objective of bachelor thesis is the analysis of typical D-areas of reinforced concrete structures. The analysis is performed using methods replacement truss. In the beginning models replacement truss are used for analysis shear bending girder. It is also shown in the individual chapters specific D-areas using spare truss method. These particular truss models are solved by RFEM program operating on the principle of Finite Element Method.
|
|
|
Prefabricated reinforced concrete structures industrial hall with administration
Sitta, Martin ; Šulák, Pavel (referee) ; Zlámal, Martin (advisor)
As the main topic this thesis describes the design and evaluation of selected reinforced concrete members of the prefabricated reinforced concrete industrial building with administration at ultimate limit state in accordance with applicable standards. Movable overhead crane with carrying capacity of 50 tons is the main distinction of the industrial hall. Lateral frame whit main structural parts which are roof prestressed girder, load-bearing column supporting the overhead crane and drilled pile transferring loads from the upper construction to the load bearing subsoil, is designed in particular. Furthermore, design of the Gerber beam which forms the slab construction in the administrational part of the building is elaborated. Structural design and evaluation of other structures of the building is not part of this thesis.
|
|
| |
|
|
Cast-in-place tank of sewage plant
Kustyánová, Orsolya ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
This thesis deals with the design and assessment of all supporting parts of a cast-in-place reinforced concrete tank of sewage plant in the village Vrbice. Tha main parts of the thesis are the technical report, static analysis, drawing documentations, construction process and visualisations. Calculation of internal forces was performed by the software Scia Engineer and verified by manual calculation. The drawing documentation constists of shape and reinforcement drawings of supporting parts.
|
|
| |
|
|
Design of the uderground part of the building
Šimek, Ondřej ; Hrubý, Tomáš (referee) ; Klusáček, Ladislav (advisor)
The bachelor‘s thesis deals with the design and assessment of reinforced concrete monolithic supporting structure of underground garages under apartment building at ultimate limit state and also at serviceability limit state, according to ČSN EN 1992-1-1: Design of concrete structures. Specifically, the design of the ceiling slab, girders, the selected column, the selected part of the wall and foundation under columns. Other parts of the building are not solved in the project. The text part contains general information on the desing of the structure, static idealization of the structure, type of load and method for calculation of inner forces. Attachments contain structural analysis, which completes the text part and solves in detail selected elements of the structure and the drawing documentation.
|
|
|
Overground Parking House
Pevner, Jan ; Klodner, Jan (referee) ; Perla, Jan (advisor)
The work focuses on the design and assessment of selected structural elements of one overground floor monolithic concrete structures and staircases. All calculations are done in accordance with Eurocode 2.
|
|
|
Design of underground garage under the block of flats
Císařová, Kateřina ; Hrubý, Tomáš (referee) ; Klusáček, Ladislav (advisor)
As the main topic this thesis describes the design and evaluation of selected reinforced concrete members of the underground garage construction of the administration building at ultimate limit state and also at serviceability limit state, both in accordance with EC2: Design of Concrete Structures. Designed members in particular are monolithic slab, girders and columns. Structural design and evaluation of other structures of the building are not part of this thesis. The text part of the thesis concerns the descriptions of analysed structures and also the descriptions of the loads acting on them. Method of designing of the structures, methods of calculating of inner forces, and also the method of modelling the structure in software SCIA Engineer are herein further described. The annexes are mainly structural analysis, which expresses the knowledge obtained from the theoretical part of this thesis, and the drawing documentation.
|
|
|
The assesment stability of the cliff
Bíba, Tomáš ; Lossmann, Jaroslav (referee) ; Horák, Vladislav (advisor)
The stability of rock walls and slopes are an integral part of professional geotechnical assessment wherever there is a breach of natural or rock mass. Assessment always depends on the expertise and experience in particular industries that report preparation. Performed mostly analytical calculation (classic or using software) or numerically. The best way is to use both methods and compare them. The aim is always best to estimate the behavior of rock mass and to ensure its safety.
|
guest ::
