|
|
Simultaneous transmission of photonic services in fibre optics
Látal, Michal ; Horváth, Tomáš (referee) ; Münster, Petr (advisor)
Diploma thesis focuses on simultaneous transmission of selected photonic services by one single-mode optical fiber. The thesis deals with the problem of common transmission of multiple photonic services by one optical fiber using the wavelength division multiplex technology. Furthermore, the origin and influence of nonlinear phenomena accompanying the simultaneous transmission of photonic services are described. Except common data transmission with a bitrate of 10 Gbit/s, a common high-speed data signal transmission with a bitrate of 200 Gbit/s, accurate time transmission and high-power sensor signal are considered. During the aimultaneous transmission of selected photonic services, the measurement of the transmission parameters was performed for various variants of the simultaneous transmission arrangement. In particular, the influence of nonlinear phenomena and possible mutual interference of individual transmission channels at 50 and 100 GHz between signals was analyzed.
|
|
|
Optical software defined networks
Janoušek, Adam ; Horváth, Tomáš (referee) ; Vojtěch, Josef (advisor)
The bacherol thesis „Optical SDN“ deals with the analysis of software-defined technology networks on the optical switch. Specifically, it focuses on remote manual switching and automatic switching based on surroundings. The aim of the thesis is description of technology, understanding the principle of software-defined networks, including the implementation of demostrative manual remote switching and automatic switching.
|
|
|
Connecting the TV studios
Flimel, Peter ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
In this bachelor thesis work is done TV link study in 2020, for the purpose of mediation football matches between studies in Prague and Bratislava. This work deals with optical connections and technology matters to revel in the transmission of large amounts of data.
|
|
| |
|
|
The modulation techniques used in WDM optical networks
Lučenič, Lukáš ; Filka, Miloslav (referee) ; Kočí, Lukáš (advisor)
The main goal of the diploma thesis is DWDM simulation of optical network, defined by recommandation ITU-T. Optical network includes 16 communication channels with length of fiber 50 km. Each channel have to be set with bandwith 50GHz and Bit rate with minimal value 10Gbit/s. The final simulation model includes 8 types of modulation techniques. The result of the thesis is comparison modulation techniques in terms of usability of bandwith and comparison of the quality of transfer
|
|
|
Software defined networks
Flimel, Peter ; Smékal, Zdeněk (referee) ; Filka, Miloslav (advisor)
This diploma work describes the software-defined network focusing on optical networks. Subsequently designed their own software network that is implemented in the environment OMNeT ++. This work deals with SDN (software-defined network), and impact on current communications environment in the world of telecom-munications services.
|
|
|
Influence of phase optic sensor to the DWDM network
Čučka, M.
This article deals with influence of phase optic sensor to the DWDM transmission. In DWDM network we use four lasers sources for data transmission on one optical fiber. Next one DFB laser is used for phase optical sensor on the same optical fiber. This article is focused on influence of power DFB laser to the DWDM network. We changed the power of the DFB laser from-2 dBm to 35 dBm and watching the bit error rate and eye of the decision of the DWDM system. This model is simulated in RSoft Optsim.
|
|
|
Non-linear character of optical environment
Žáček, Martin ; Míča, Ivan (referee) ; Přinosil, Jiří (advisor)
This paper describes theoretical and application options of nonlinear effects in optical medium. Optical medium means fiber optics, because the fiber is the most employed optical medium at these days. Basic statements of this work are theoretical information with mathematical and physical expressions. These expressions defines nonlinear medium and effects which are founded here. These effects are split to second and third orders. Nonlinear effects of second orders are Second-harmonic Generation, Three-wave Mixing process. Nonlinear effects third orders are Third-harmonic Generation, Self-phase Modulation, Cross-phase Modulation, Four-wave Mixing and Degenerative Four-wave Mixing process. These effects are extended by scattering effects – Brillouin’s and Raman‘s Scattering. The next point discuss about optical communication system DWDM. DWDM uses dense wavelength multiplexing. Nonlinear effects have a few negative influences on these systems. There are requests for high bandwidth and communication speed. FWM and XPM limit these requests. They can invoke cross-talks. We support theoretical information with application examples and simulations at the end of this work. We use OptSim v.4.0 program. We are simulate FWM and XPM effect in depend on chromatical dispersion and power.
|
|
|
Design and management of WDM systems for optical networks
Červenka, Vladimír ; Šporik, Jan (referee) ; Tejkal, Vladimír (advisor)
This thesis describes single types of wavelength-division multiplex (WDM) according to the International Telecommunication Union (ITU-T). This work offers an overview of components and evaluation of critical parts of network design utilizing WDM technology. There are depicted typical properties, suitable components and channel spacing for each category. Suitable optic fibers according to ITU-T and characteristics of negative effects can be found in the work as well. Furthermore, there are presented most important optic sources, optic amplifiers, optic detectors with filters their requirements and application. They are especially important for achieving operation of WDM system. The fifth chapter considers impact of negative effects in fiber optics and their influence on the system. Then, a WDM system is designed along with management and monitoring the physical layer. The work also presents 1,33 Tbit/s (32 × 42,7 Gbit/s) WDM transmission over 300 km (with three 100 km spans) of post-compensated non-zero dispersion-shifted fiber (NZDSF) LEAF. The capacity of 400 Tbit/s×km is achieved in a single 25,6 nm C band using non-return-to-zero differential phase-shift-keyed modulation (NRZ-DQPSK), balanced detection and erbium-doped fiber amplification. Together with design of transmission system a several simulative analysis has been carried out in order to find the optimum configuration (such as number and distances between amplifiers, length of spans or the way of dispersion compensation) for a high bit rate optical transmission system. It was used a program OptiSystem 8.0.
|
|
|
Design of Multiplex Optical Fibre Link
Krejča, Libor ; Křivánek, Vítězslav (referee) ; Kyselák, Martin (advisor)
In this thesis I consider problems of optical multiplexers, optical amplifiers and designing optical networks with this components. CWDM and DWDM are the most common used multiplexers today. I describe principles of realization multiplexers from basic level to realization in WDM networks. EDFA is also common used amplifier today and I describe his internal structure and how it works. Today, we can observe many realization of optical netwoks with Raman amplifiers, especially in long haul networks. Raman amplifier is characterized in brief. In next chapter I describe the design of optical communication systems and the main designing equations are explained. Then I used the equations for example of designing optical communication system with multiplexers, EDFAs and other components, which are needed for function of the system. In last chapter I explain mathematical model of signal propagation in optical fiber called nonlinear Schrodinger equation, which includes main optical effects in fiber like chromatic dispersion or Kerr effect. The simulation model and his numeric solution was designed including PMD effect, the simulation model is programmed in MATLAB.
|
guest ::
