|
|
Connecting the TV studios
Flimel, Peter ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
In this bachelor thesis work is done TV link study in 2020, for the purpose of mediation football matches between studies in Prague and Bratislava. This work deals with optical connections and technology matters to revel in the transmission of large amounts of data.
|
|
|
Spectral characteristics in fiber optics
Chleboun, Jiří ; Tejkal, Vladimír (referee) ; Šporik, Jan (advisor)
This bachelor’s thesis is focused on the influence of attenuation and dispersion glass and plastic optical fibers in optical transmission system. Theory of optical transmission is discussed in the theoretical part, it is defined term like spectral attenution characteristic and its division into transmission bands. Sources and detectors are itemized further, which are used for optical transmissions in fiber optics. The thesis describes the most occured effects, which influenced transmission parameters of optical fiber, like optical attenution, dispersion and aspectual polarization dispersion. Theory of plastic optical fibers is processed at the end of theoretical part of thesis. It is also processed advantages, disadvantages and useage of plastic optical fibers and they are consequently compare with glass fibers. Comparison is focused mainly on attenuation, transmission properties and useage on these types of fibers in telecommunication. Representation of spectral attenution characteristics in programme MATLAB is practical output of the bachelor´s thesis. Created programme approximates points which are got from measure optical attenuation by the Lagrange interpolation polynomial.
|
|
|
Verification of parameters of passive optical components on short wavelengths
Látal, Michal ; Filka, Miloslav (referee) ; Vojtěch, Josef (advisor)
Semestral thesis deals with the basic theoretical knowledge in the field of optics, light propagation and optical fibers. It describes in detail the optical transmission system and its associated issues, such as the attenuation of optical fibers or differently caused dispersion. The main part of this work is a description of each passive optical elements, their production technologies and applications in optical communications. Within the optical connection its radiation sources and detectors of optical radiation are explained. The last practical part is focused on the measurement of insertion loss provided by passive optical components.
|
|
|
Methodology for the measurement of optical arterial network
Chleboun, Jan ; Dostál, Otto (referee) ; Filka, Miloslav (advisor)
There are methods to extend the transmission channel of optical transmission medium thanks to the development of telecommunications and informatics. Multiplex is a grouping of signals into a single transmission path and wave-division multiplexing is the best reason of use of the maximum fiber optic transmission capacity. The subject of this work is to determine whether a particular transmission path is suitable for such an extension of their capacity and how much. The answer is obtained by measuring the attenuation, the chromatic dispersion and the polarization mode dispersion, whose values are strictly limited and which determine next steps in the expansion of the transmission path, which is comprised by optical medium. Measurement methods determine the nature of the measured route and its current transmission capacities. Draft of the measurement methodology, which ensures the correct procedures during a possible transition to higher speeds is the output of this work. Thanks to the acquired characteristics of the BAPS (the Brno Academic Computer Network), the bit rate 40 Gb/s can be provided on this part of the network under the conditions of the introduction of certain countermeasures, particularly the exchange of a connectors on the measured optical lines. As for the back reflection lines in excess of the standard recommendation and pre-emptively on the lines with values with still agree with the return loss. Countermeasure for limiting of the chromatic and the polarization mode dispersion are do not need to stand in the way of a planned transition to a higher rate of the BAPS.
|
|
|
Transmission system for polymer optical fiber
Kubík, Martin ; Tejkal, Vladimír (referee) ; Šporik, Jan (advisor)
Bachelor's thesis deals with the transmission of signals via plastic optical fibers. First part contains basic principle and parameters transmission of light beam via fiber. The most common types of plastic optical fibers are analyzed, theirs characteristic parameters and trends in the development of this type of transmission medium are listed. In the second part is designed and implemented the proper integration of the optical transmitter and receiver to transmit signals via plastic optical fiber. The advantage of the implemented circuit is its modularity, so it is possible to further easily extend the system. Laboratory task is prepared for use system in the laboratory.
|
|
|
Analysis and construction of an optical fibre tunable attenuator for telecommunication applications
Prokop, Daniel ; Eliáš, Josef (referee) ; Urban, František (advisor)
This paper deals with the possibilities of designing the module for control of the attenuation of the optical signal. The paper describes basics of ber optic transmission and beam e ects. Variants of attenuation cells are characterized in this paper and based on the ndings a solution of the module for control of the attenuation of the optical signal is proposed. Practical section of the thesis deals with the design and physical construction of module for control of the attenuation of the optical signal using MEMS variable optical attenuator.
|
|
|
Design and testing of XRD holder for post-mortem analysis of li-ion battery electrodes performed in an inert atmosphere
Klvač, Ondřej ; Chladil, Ladislav (referee) ; Čech, Ondřej (advisor)
The work describes the design and manufacturing of a test device for post-mortem measurements of electrodes of electrochemical cells using X-ray diffraction spectroscopy. The theoretical part describes the diffractometer Rigaku Miniflex 600, for which the product is intended. At the same time, an overview of solutions in various applications is processed here in the form of a recherche. The practical part documents the current development of a new cell, on which tests were performed. Here is an overview of the influence of gases and insulating materials on the resulting data, especially distortion and attenuation. Subsequently, a new design with improved hermetic insulation and sample displacement error correction is described. The principle of operation of the manufactured cell, including the control unit and software, is elaborated in the form of technical documentation. Finally, the functionality is verified by comparing the diffractograms of the powder standards and the graphite electrodes.
|
|
| |
|
|
GUI for the processing of measurements from the optical reflectometer
Vitek, Vojtech ; Jurčík, Michal (referee) ; Münster, Petr (advisor)
This diploma thesis is focused on realisation of the application, that process and display measured data from OTDR device. The first section describes optical fibers, transmission characteristics of fibers and measurement methods of the attenuation on optical path. The second section describes the principle of the OTDR method and measured events on optical path. Final part is dedicated to realisation of the appication by the assignment.
|
|
|
Effect of optical connectors quality on transmission
Bernkopf, Miroslav ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
This diploma thesis deals with optic fiber connectors and their influence on transmissions realized via fiber optics. Optical fibers and lightguides play the key role in telecommunications because of constant demands of higher bandwidth and data rates. Original metalic wires do not meet market requirements and so the fiber optics are more and more being used. There are various types of fibers and there are also many ways of connections. This work deals with demountable way of connection – optical connectors, which have the biggest influence on a total attenuation and route length. Connector has to meet various requirements such as cleannes, quality, mechanical construction and ferrule polishing.
|
guest ::
