|
|
Analysis of Aplication Flux and Solder Paste on PCB for BGA components
Toufar, Michal ; Řihák, Pavel (referee) ; Vala, Radek (advisor)
This thesis deals with rework of BGA components. There are described defects and errors in a solder joints. The current trend is focused on thin packages with fine pitch. It is assembled with smaller and smaller solder balls. It is described effect of different application of flux and solders paste for rework. The main part is focused on dipping and dispensing. These methods are suitable for repair process.
|
|
|
New ways in Packaging
Hřešil, Tomáš ; Jankovský, Jaroslav (referee) ; Szendiuch, Ivan (advisor)
This project deals with the creating a base of manual for modern electronic packages, which are more and more used in today's electronic circuits and devices. The modern packages are mentioned small outline DIL, QFP, BGA, PGA, CSP, Flip chip. The work is also including packages known SiP (System in Package) that are consisting or use the combinations of packages BGA, PGA, CSP and Flip Chip. At the end of the work are short described the most important design rules for assembly of mentioned packages on substrate (PCB).
|
|
|
Parameters of BGA-type interconnection joints ceramic Al2O3 substrates
Somer, Jakub ; Švecová, Olga (referee) ; Nicák, Michal (advisor)
This project deals with questions related to parameters of solder balls, used on BGA packages, on ceramic substrates. First part of this project contains general characteristic of solder balls, their properties and usage. In the following part there are described technologies and methods used during the experiment including the design of test substrate. The last part is dedicated to practical examination of compatibility of selected conductive pastes, solder pastes and fluxes during vapor reflow soldering. At the end of this work the selection of materials, assembly, soldering and microsections are described.
|
|
|
Increasing the Yield of BGA Repair Process
Janíček, Martin ; Vala, Radek (referee) ; Řihák, Pavel (advisor)
This thesis deals with possibilities of increasing the yield of BGA repair process. First there is mentioned basic problematics and its notions, problems and possibilities. Next it deals with technological aspects of repairing of devices in BGA covers. Also there is mentioned basic problematics of evaluating of yield. There is stated current state of solving the problem and also there is suggested new design of application which would be more optimal for evaluation of the yield of process. This thesis contains results of practical testing of methods of application of flux affecting final quality of solder joints as well as kind of flux which was used. At the end
|
|
|
Analysis of Defects on PCB Using X-RAY
Mlýnek, Martin ; Vala, Radek (referee) ; Řihák, Pavel (advisor)
This thesis is focused on BGA packages and fault detection after rework using X – Ray. There is a description of BGA packages by carrier substrate, techniques of connecting on chip, from mounting packages to repair printed circuit boards (hereafter PCB). Thesis summarizes description of defects, which are created after rework process. There is also description of X – Ray as method for analyzing defects. X – PLANE method used to detect internal structure of BGA packages and it was confirmed by microsection and by software for reconstruction. Description of automatic and manual measurement is follow.
|
|
|
Research of the Quality of Solder Joints by BGA and QFN Packages
Otáhal, Alexandr ; Adámek, Martin (referee) ; Szendiuch, Ivan (advisor)
This diplomas thesis deals with specific technologies and manufacture of BGA and QFN packages. Also summarizes the most used test methods for assessing the reliability for. Describes the making of equipment for soldering in a nitrogen atmosphere, followed by comparison solder joints of BGA and QFN forming in different atmosphere. Finally, summarizes knowledge about the process of soldering and desoldering lead-free solders for BGA packages, followed by experimental evaluation of the causes of malfunction of repaired samples.
|
|
|
Modern Assembly for Microelectronic and Electronic Modules
Janík, Pavel ; Švecová, Olga (referee) ; Šandera, Josef (advisor)
Project is focused on describe modern assembly of microelectronic and electronic modules in electronic devices. Sense of the project is analyse reliability and inadequacies electronic devices assembled by modern technogies. Inadequacies modern technologies are impulse for design, implementation and testing new our way of assembly microelectronic modules. Main kind of materials which are used in this project are ceramics Al2O3 and printed circuit board FR4.
|
|
|
PCBs Repairs with BGA and FC Packages
Buřival, Tomáš ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
Graduation thesis is specialized on dilemma of the integrated circuits with ball grid array. Chapter two describes several types of packages and confrontation of their characteristics. Chapter three considers possibilities of corrections these boards bedded with packages, mounting and demounting of these packages, method of camera control and also inspection of the soldering process. Chapter four attend to practical measuring of thermal profiles and their optimalization.
|
|
|
Thermomechanical simulation of modern electronic packages
Skácel, J.
This paper deals with issue of modern electronic packages mainly thermo-mechanical simulation. The first part is focused on the comparing of QFN (Quad-Flat No leads) and BGA (Ball Grid Array) packages including their advantages and disadvantages. The second part is focused on simulation of these packages in ANSYS program from the point of thermos-mechanical behavior.
|
|
|
Effects Affecting BGA Soldering
Janíček, M.
This paper deals with effects, which can affect solder joints quality. It also evaluates experiments which were made. These experiments were connected with fluxes problematic. First there are mentioned effects connected with amount of flux, and then experiments were focused to ways of applying the flux. Next steps are mentioned at the end of the paper.
|
guest ::
