|
|
Proposal of the reconstruction of the distribution network in a specific area
Novák, Vojtěch ; Mrvová, Dana (referee) ; Blažek, Vladimír (advisor)
This diploma thesis is concerned with reconstruction of distribution network in Hruba Vrbka. The diploma thesis is divided in two parts. For better understanding to this issue, the first theoretical part is shortly dedicated to the history of electrical power system, to the several types of distribution network of low voltage and high voltage and their utilization in the area, considering the reliability and the quality of delivery of the electric energy. In this thesis there is mentioned division of distribution grids according to placing of cable lines, according to voltage and according to type of grid connection. Next part of this work is dedicated to the description of overhead lines and cable lines and their characteristics. For the proper concept of the grid we should know some characteristics of the electric line’s proposal: mechanical strength, warming, voltage drop, efficiency, degree of safety and provision of delivery. In the end of the theoretical part there are described methods for calculation of grid’s steady state as a linear task and also non-linear task, elimination of the balancing node, the iterative method, the reduction of external power take-off nodes and the solution of the steady state of the network through the direct current model. The second part of the diploma thesis is concerned with the calculation of the steady state in the village Hruba Vrbka. In this part is also described the KASI program which was used for the calculation of the grid’s steady state. Firstly low voltage grid’s balance in Hruba Vrbka was found out and evaluated and then there were proposed some solutions of the reconstruction for the grid improving. The suggested options of the reconstruction are considered from technical and economical point of view and the best solution is chosen. For this solution there is suggested the protection through program SICHR 9. In the end of this diploma thesis there is checked the load of the high voltage line.
|
|
|
Utilization of local systems for power system regulation
Kostov, Jiří ; Geschwinder, Lukáš (referee) ; Bartošík, Tomáš (advisor)
Bachelor’s Thesis deals general information about methods of regulation of elektrification systems, including basic principles of regulation of frequency, regulation of voltage and regulation of reactive and active power. Work includes information about aggregate remote control system, power plants that participate on regulation and self device for regulation and controlling of reactive power. Work engages on new options in section of regulation and his requirements for distribution sites. Part of work deals information about renewable natural energy sources and his requirements for distribution sites.
|
|
|
Distribution Network Development and Configuration
Pospíšil, Petr ; Beneš, Jan (referee) ; Topolánek, David (advisor)
The theme of this master‘s thesis is distribution network development and configuration in the part of Brno – Trnitá. There is expected to be investments there in the next few years. The thesis consists of two parts. For better understanding of this problem, the first theoretical part concerns with the description of electrical network (subdivision in accordance with voltage levels, conductor types, network types and other electrical network parts), solution of grid’s steady state (as a linear task and also non-linear task, elimination of the balancing node, the iterative method) and Brno distribution network characteristics. The second part concerns with distribution network development and configuration depending on anticipated load development in Trnitá. The result is proposal for transformer station construction Opuštěná fitted with three transformers of nominal output SN = 40 MVA and network configuration change required both for providing new consumption supply as well as sustaining current one.
|
|
|
Application of Sensors and Digitalization Based on IEC 61850 in Medium Voltage Networks and Switchgears
Štefanka, Martin ; Braciník, Peter (referee) ; Müller,, Zdeněk (referee) ; Toman, Petr (advisor)
Vzduchem izolované vysokonapěťové rozváděče jsou nedílnou součástí energetického distribučního řetězce a to jak v průmyslovém, tak ve veřejném sektoru. Hlavní funkcí rozváděče je ochrana pracovního personálu, rozpojování/odpojování a spínání, izolování, měření proudů a napětí, chránění a ovládání zatížení a komunikace dat do řídících systémů. V každé z výše zmíněných funkcí probíhal technologický vývoj v průběhu posledních 40 let. Dnešní rozváděče jsou spolehlivé a elektrickému oblouku odolné zařízení, zoptimalizované téměř k fyzikálním limitům dielektrických, elektromagnetických a termodynamických polí. Vakuové vypínače zajišťují stálou a spolehlivou vypínací funkci. Taktéž v oblasti chránění, řízení a komunikace došlo k mnoha technologickým proměnám. Od elektromechanických relé přes zařízení založená na tranzistorech, později na jednoúčelových mikroprocesorech, až po dnešní multifunkční vysoce výkonná mikroprocesorová inteligentní elektronická zařízení. Pouze oblast měření proudů a napětí setrvala z technologického hlediska posledních 40 let beze změny. K dominujícím měřícím technologiím dneška stále ještě patří indukčně založené transformátory proudu a napětí. Byly sice provedeny některé pokusy k obměně technologie měření jako takové, nicméně bez dosažení úspěchu. Tato dizertační práce je zaměřena na poskytnutí nového náhledu na alternativní technologii měření v elektrických sítích a ve vzduchem izolovaných vysokonapěťových rozváděčích, kterou lze využít jak pro měření proudu, tak i napětí. Tato práce vysvětluje, proč Rogowského cívky, odporové a kapacitní děliče jsou tou správnou volbou a měly by být použity ve vysokonapěťových rozváděčích a podrobně analyzuje přesnost měření a jejich příslušné meze. Dále tato práce popisuje, že pro nasazování nových měřících technologií musí být postupováno systematicky. Senzory připojené k inteligentním elektronickým přístrojům a schopností komunikace založené na IEC 61850 spolu s vysokorychlostní komunikační sběrnicí Ethernetu vytvoří systém, který zjednoduší a sjednotí konstrukci rozváděčů a umožní oddělit aspekty projektování měření od studie zkratových selektivit. V práci je také uveden příklad, jak tento nový systém může přinést změny a zjednodušení do oblastí projektování a řízení. V této práci jsou popsány výsledky několikaletého úsilí při stanovení nových měřících a digitalizovaných přístupů ve vysokonapěťových rozváděčích pod autorovým vedením. Toto úsilí také vedlo k uvedení nového produktu – UniGear Digital - konceptu od ABB. Závěrečná část práce demonstruje praktické nasazení všech výsledků v této práci při skutečných aplikacích.
|
|
|
Dimensioning of Anchor Sections of MV Overhead Lines
Křepela, Pavel ; Jáhn, Vítězslav (referee) ; Orságová, Jaroslava (advisor)
Overhead lines are using in the vast majority for distribution of electricity in medium voltage level in the Czech republic. This Master’s Thesis deals with theoretical and practical knowledges to design and construction of these lines. Particularly, the mechanical properties of overheads lines and solving their calculation in accordance with applicable standards. The main task is to acquaint potentional designers in this sphere with this issue, which is recently ignored. An important benefit is the practical calculation of the actual overhead 22kV.
|
|
|
Short Circuit Currents in DC Systems
Kolařík, Robin ; Geschwinder, Lukáš (referee) ; Paar, Martin (advisor)
The bachelor thesis deals with the analysis of short-circuit currents in DC systems. The thesis introduces the possibility of application of low voltage DC distribution in commercial and industrial buildings. The second part is focused to high voltage direct current transmission. The practical part deals with the calculation of short-circuit currents of individual elements and subsequently with short-circuit conditions in the DC network. At the end of the work are evaluated advantages and disadvantages between AC and DC voltage and suitability of use in given areas.
|
|
|
Capacitance measurement of high-voltage PN junctions
Derishev, Anton ; Kosina, Petr (referee) ; Boušek, Jaroslav (advisor)
The work deals with the capacitance measurement of high-voltage PN junctions. The work is divided into theoretical and practical parts. The theoretical part presents insight into the fundamental properties of PN junctions and methods for measuring of the capacitance of PN junctions, primarily by C-V measurement. In the practical part, several kinds of measuring circuits are introduced and a suitable method of measurement is found. The calculations of basic parameters - the width of the base and resistivity are presented and discussed. The results were compared with the values obtained by calculation from the technological parameters of the junction.
|
|
|
Hihg voltage measurement at atmospheric potentials
VÁŇA, Jan
The diploma thesis deals with the experimental construction of a non-contact high-voltage voltmeter for measuring potentials on the basis of generally known and available data. The aim of this work is clear description of the production procedure, functional measuring device, comparison of the influence of material and shape of electrodes on the measurement itself. Another goal of the work is also a general direction to reusing unnecessary or non-functional parts and materials, usually intended for disposal, in various structures.
|
|
|
Design of a 22 kV network in the Lipno area after the integration of the new 110/22 kV transformer station
Žižlavský, Jakub ; Koudelka, Jan (referee) ; Ptáček, Michal (advisor)
This diploma thesis deals with the design of a new 110/22 kV substation in Horní Planá. The substation design addresses, for example, the issue of reducing the load of surrounding power lines from 110/22 kV substations, reducing the size of short-circuit ratios in the surrounding system, reliability and continuity of supply, etc. Furthermore, loads of individual outgoing feeders from the surrounding substations are analyzed, in case they will be connected to a new substation. Following this, the work also addresses the related new decay points of the lines, which are determined by calculation and simulation in the Grizzly program. The simulation results could be used to compare the current load status of individual lines and contribute to the assessment of the possible benefits of both the new substation and the implementation of other modern technologies for faster and more efficient measurement and handling during operating and fault conditions.
|
|
|
Autonomous and dispatching control of distributed power generating plants operated in the HV distribution system
Dvořáček, Jiří ; Jurík, Michal (referee) ; Drápela, Jiří (advisor)
Theses focuses on the evaluation of the possible means of active and reactive power control of generating units connected to medium voltage. First part summarizes analysis of Czech Republic medium voltage distribution grid. It summarizes means of autonomous and dispatcher control of generating units with respect to European Comission directive RfG, standard ČSN EN 50549-2 and national implementation PPDS. Following parts provide description of generating unit and distribution grid models used for simulation in PSCAD. Last part focuses on evaluation of results obtained via simulating steady-state scenarios as well as continuous simulation.
|
guest ::
