|
|
Optimal layout proposal of technological workplaces at a small mechanical engineering company
Mohorko, Martin ; Dvořák, Milan (referee) ; Štroner, Marek (advisor)
This master´s thesis is focused on technological designing in a small company ENGITEC Motosport s.r.o. In first theoretical part of the thesis is this subject described in detail and analyzed in terms of economic and technical aspect. Next part describes the current state of the company and the production hall as well with keep on its current layout. In the following chapters is chosen piston-shaped component, which is manufactured by the company and three different variants of the piston production. Then one of them is selected, to which all related capacities calculations are made. In the final part of the thesis is proposed the relevant final layout of the hall and there is also the technical-economic evaluation of the most relevant variant included. Key words
|
|
|
Optimization of Production Processes Using Lean Methodology
Jablonka, Ján ; MBA, Marek Chromý, (referee) ; Juřica, Pavel (advisor)
The aim of this thesis is the implementation of lean manufacturing principles according to the lean methodology in selected company to minimize waste and effectiveness of production. The theoretical part is focused on defining the terms lean manufacturing, waste and lean methods that serve as the foundation for the practical part. The practical part is divided into several parts. First step is to do a SWOT analysis of production in a particular company. Using the lean tools, we find the root cause of the problem and propose solutions to effectiveness the manufacturing process. Part of the proposals will also benefit the proposed solutions. It is necessary to note that according to the lean methodology, not every proposal must automatically have a financial impact.
|
|
|
Risk Analysis of a Weldment Production Process
Slámová, Aneta ; Kurucová, Šárka (referee) ; Blecha, Petr (advisor)
This diploma thesis is focused on the risk analysis of a selected production process of the company SIK METAL s.r.o. The work is divided into three parts, the theoretical part, then the analysis of the current state and the design part. The theoretical part defines the basic concepts that relate to risks. These theoretical findings are then applied in the second part of the work, where risk identification is performed using various types of analysis. Based on selected analyzes, proposals and recommendations are proposed in the final part of the diploma thesis. Proposals and recommendations contain financial quantifications.
|
|
|
Proposal of Production Process Using Lean Manufacturing Tools
Končický, Petr ; Bukvald, Vladimír (referee) ; Juřica, Pavel (advisor)
The diploma thesis is concerned with the implementation of lean components in the production process of selected company. Through the Value Stream Mapping method an analysis of the current state is performed that resulted several shortcomings of the current production process. Based on the outcomes of the analysis, proposal of new production line is made that contributes to increased customer value within a shorter production time, reduce waste and thus to streamlining the production process.
|
|
|
Software Support of Manufacturing Process Management
Miler, Filip ; Kahoun, Jindřich (referee) ; Videcká, Zdeňka (advisor)
The thesis describes the design of the information system that is supposed to support production process at the Varia, Ltd company. Theoretical background of operative production management and information systems is described in the first part. The second part contains the analysis of the processes inside company in which the problematical areas were identified. Based on the analysis results and the theoretical background, the particular design of information system was created. This system is supposed to support operative production management and to eliminate the production process weaknesses.
|
|
|
Automation of machining of the aluminum castings
Filistein, Jakub ; Prokop, Jaroslav (referee) ; Osička, Karel (advisor)
The diploma work focuses on designing an automated machining, finishing and assembly line. Described in the chapters are the current technology of production, suggestions, the choice of a new solution and a technological-economical evaluation including capacitive and costs of running the production line and a comparison with the current technology. The result is proof that the return of the investment is roughly in one third.
|
|
|
Development and Implementation of Energy Savings and Energy Management Methodology in an Industrial Enterprise
Dudarev, Ivan ; Demeč, Peter (referee) ; Suchánek, Rostislav (referee) ; Blecha, Petr (advisor)
V současné době se problematika energetických úspor dostává do popředí zájmu jak na úrovni jednotlivých podniků, tak i na úrovni celého státu. Často bývá příčinou sporů ve vědeckých kruzích i mezi odborníky z praxe. Lidstvo tradičně začalo využívat energii z minerálních přírodních zdrojů, které však ve srovnání s obnovitelnými zdroji energie mají omezení. Výzkum a implementace moderních technologií jsou ztíženy otázkou investic a časově omezeny. Proto se evropská strategie energetické bezpečnosti zaměřuje na energetickou účinnost, která je jedním z nejefektivnějších způsobů zlepšení bezpečnosti spotřeby energie. Velké společnosti a podniky jsou jedním z hlavních spotřebitelů energie. Proto je tato vědecká práce zaměřena na problematiku úspor energie a zlepšování energetické účinnosti podniku. Těžiště práce spočívá ve vytvoření a zavedení metodiky pro úsporu energie a managementu hospodaření s energií ve výrobním procesu automobilového podniku. Dále je pro účely této práce vytvořen a popsán způsob vizualizace spotřeby energie v prostředí virtuální reality
|
|
|
Project of grouping for brass bearing separators production
Křížek, Stanislav ; Heinl, Zdeněk (referee) ; Rumíšek, Pavel (advisor)
This diploma thesis deals with a project to centralize the production of brass cage bearings in the company ZKL Hanušovice, a.s. The first part is focused on the description of the current production process, which has many disadvatages. From the analysis of these disadvantages we can make suggestions for making the production process more effective. The second part of the thesis focuses on these suggestions for the cetralized production proccess. The best of these suggestions has been elaborated into a technological project including capacity calculation and technical drawings. The final part of the thesis provils a technical-economic evaluation of the project, focusing mainly on the efficiency of investment in new production equipment and its impact on company management.
|
|
| |
|
|
Data Monitoring for Production Process Modelling
Havelka, Martin ; Opletal, Tomáš (referee) ; Videcká, Zdeňka (advisor)
The abstrakt of this bachelor thesis is presenting of the simulation method with focus on data collection in company ALPS ELECTRIC CZECH, s.r.o. Thesis briefly introduces the questions of manufacture process simulations. It shows what data are required for making real models, in what way are these data capable of being measured and filed.
|
guest ::
