|
|
Detached House with Winery
Hlavinková, Veronika ; Šibal, Jan (referee) ; Králová, Zuzana (advisor)
This bachelor thesis is focused on a design documentation of a detached house with winery within a cadastre unit of Litovel city. This is a three storey freestanding house with a layout for a family of four. The winery is located in a basement, residential area is located on the first and second floor. A structural system of an object is designed from POROTHERM with an exterior insulation system 120 mm wide. Vertical peripheral supporting structures of the 1st and the 2nd floor will be bricked up with Porotherm 50 eko+ and the basement from a permanent formwork ŽB 25. Interior bearing walls are made of Porotherm 30 profi and non-bearing walls are made of Porotherm 11,5 Aku, except the 2nd floor – these are made of plasterboards Rigips 150 mm wide. Outer coat is silicate, grooved of 2 mm, light brown color. A staircase is designed as cast-in-place reinforced concrete. A ceiling construction is made of keramo beton systém Porotherm (beams Pot and Miako inserts) 250 mm wide. There is a cast-in-place reinforced concrete ceiling over a garage, 150 mm wide. A roof is designed as a roof truss with a clay tile roofing Tondach Hranice11, Amadeus black color. Doors and windows are designed as plastic, mahogany color, a sectional garage door is also mahogany. Floor coverings are designed according to functioning of different rooms – tiles or laminate flooring. The main purpose of my bachelor thesis is to figure out a space arrangement, a suitable construction systém, structural system and a design of drawings including text documentation. This bachelor thesis is in a shape of a design documentation for building execution.
|
|
|
Low-energy building of boarding house
Rainochová, Anna-Marie ; Rubinová, Olga (referee) ; Počinková, Marcela (advisor)
The aim of the master project is to design a building of an energy-efficient boarding house. It is a three-storey building made of sand-lime masonry with a combination of a saddle roof and a flat green roof. The capacity of the building is 20 visitors. The basement contains a small wellness centre, kitchen storage, general storage, and a utility room. The first floor contains main entrance, a canteen, staff premises, and an accessible guest room. The second floor contains 7 guest rooms and a cleaning room. The third floor contains a meeting room with a kitchenette and toilets, one guest room and entrance to the green roof terrace. Whole building is ventilated by four air conditioning units. The building is heated by floor heating and radiators supplied with a geothermal heat pump and solar thermal panels. Solar thermal panels were analysed.
|
|
|
Antenna for telecommunications equipment on a building in Brno
Alánová, Anna ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
The subject of this thesis is the design of antenna mast variants on an existing building in Brno. Firstly, a professional inspection was carried out at the primary school to measure the roof and evaluate the overall condition of the structure. From the measured data, a model of the entire roof was developed in Autodesk Inventor and documentation of the actual condition was prepared. Based on this documentation, the design of the steel antenna mast was developed in two variants - a tubular mast and a truss mast composed of circular bars. The anchoring of the entire structure with the antenna mast is by threading into the bearing walls and further fixing into the rafters and collar tie. Both variants were modelled in AxisVM, the design of the connections of the tubular mast was carried out in IDEA StatiCa, the design of the connections of the truss mast was determined by manual calculation. Both of these variants were modelled in Autodesk Inventor and the drawing documentation, and an accurate statement of materials were produced from this. The roof was scaled down to the central section only for structural design purposes. The roof was first assessed in AxisVM separately and then with the effects of the structure loads from the antenna technology including the proposed roof strengthening. The assessment of the carpentry joints was determined by manual calculation.
|
|
|
Pension with hippotherapy
Zdražilová, Barbora ; Kašpárek, Stanislav (referee) ; Utíkalová, Ivana (advisor)
The subject of the diplom work was to prepare a detailed project documentation of the penzion with hippotherapy in Veseli nad Moravou. This is a document processing house with two floors and the building stables. The object of the pension are located accommodation rooms, dining room and especially apartment manager. The building is located 12 stables are housed boxes, feed stores and higienické facilities for guests.
|
|
|
Detached house, Bystrice pod Hostynem
Šindelková, Petra ; Kalábová, Tereza (referee) ; Bečkovský, David (advisor)
This bachelor’s thesis deals with a design of a detached house in a particular area in the village Bystrice pod Hostynem. The aim is to create dispositionally logically linked com-plex that will suit the requirements of a modern four or five-member family and will fit into the current development with its own look. The house is designed as a two storey, no basement and with a gabled roof. The garage for one car is structurally and functionally joined with a living area. Peripheral walls are from the SENDWIX system, which is made up of the sand-lime bricks warmed with mineral insulation of rock wool. The orientation of this house to the cardinal points is chosen according to the requirements of sunlight and the thermal comfort of separate rooms. On the south side of the house is a spacious garden which is accessible through the terrace from the living room.
|
|
|
Design of the selected parts of the concrete object
Hrvolová, Markéta ; Horák, David (referee) ; Švaříčková, Ivana (advisor)
The aim of the bachelor´s thesis is the static solution of the selected parts of the reinforced concrete object with drawing documentation included. Project describes the design and assessment of the monolitic slab structure and stairway slab by the first and second limit state. As the part of the thesis is the attachment describing the process of modeling the truss structure. For calculation of the internal forces was used software Scia Engineer.
|
|
|
Family house
Fendrich, Lukáš ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
The content of this thesis is the construction of a detached house in the Moravany village near the city of Brno. This is a house with two floors and a basement. The house is a self-contained housing unit, and is designed for 2 persons (2 children, 2 adults) for long-term accommodation. The main load-bearing walls are made of structural system Ytong and Prefa for underground walls. The non-supported walls in the basement are made of autoclaved aerated concrete, the rest of non-supported walls are made of plasterboard in the floors. The ceilings are made up of Ytong beams and autoclaved aerated concrete inserts, cast-concrete layer, forming reinforced concrete beamed ceiling. The roof is sloped, gabled, created by the construction of timber truss, purlin system.
|
|
|
Multipurpose Rekreational Facility
Holá, Ludmila ; Závorková, Kateřina (referee) ; Králová, Zuzana (advisor)
This master thesis deals with the proposal of a multifunctional recreational facility. The complex of buildings consists of a guesthouse and stables. The guesthouse is a single-storey building with a residential attic. It also includes a restaurant with a mini-brewery and a shop selling horse riding products. The guesthouse is designed to accommodate up to 41 people. The first floor is barrier-free. The main entrance of the guesthouse and the shop faces southwest. The restaurant is accessible from the southeast. There are paved guest parking areas around the buildings. The building of stables with its accompanying facilities is a single-storey which is designed to stable 17 horses. The main entrance of the stables faces southeast and the building is also accessible from the northeast and the northwest. Both buildings have a gabled roof which consists of supporting rafters. The buildings are as designed a timber-frame construction with a supporting frame made of timber pillars which is coated with the FERMACELL boards.
|
|
|
Family house
Pelc, Jan ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
Theme of this bachelor work is family house. The house is designed from POROTHERM wall system, there are two above grand and one under grand floors. The roof of the building is designed gabled. The house is situated on sloped land to the south side. Construction corresponds to the valid ČSN regulations.
|
|
| |
guest ::
