|
|
Verification of quality of the cadastral map in cadastral unit Křtěnov u Olešnice
Žižlavská, Tereza ; Zvolská, Hana (referee) ; Berková, Alena (advisor)
This thesis deals with the verification of quality of the cadastral map in digital form in the cadastral unit Křtěnov u Olešnice. The map was created after a renewal of the cadastre documentation by reprocessing in 2012. In the terrain there were measured as many detailed points as possible. These points were compared with the points in the cadastral map. Then the parcels with differences between the cadastral map and the actual state in the terrain were solved. The software VKM was used for processing.
|
|
|
The determination perimeter of the complex land consolidation in the cadastral area Dobronice
Matušková, Veronika ; Pavlík, Milan (referee) ; Berková, Alena (advisor)
The subject of this diploma thesis is the determination perimeter of the complex land consolidation in the cadastral area Dobronice. Documents for detection of borderlines are prepared on the basis of a defined perimeter. Borderlines of perimeter is examined with an officially appointed commission and with landowners. A geometric plan is made for the partition of the land, determination borderline of lands for land consolidation and running of specify borderlines from landowners. The results of detection borderlines are created in prescribed elaborate.
|
|
|
Verification of quality of the cadastral map in cadastral unit Křtěnov u Olešnice
Ondrůšková, Hana ; Zvolská, Hana (referee) ; Berková, Alena (advisor)
The master thesis focuses on checking the quality of a digitalised cadastral map in the cadastral district Křtěnov u Olešnice, which lays in Blansko district in South Moravian Region. Determined noticeable boundaries are compare with boundaries displayed in the cadastral map by several methods - graphically, in coordinates and on the basis of side measures. Historical maps and records of detailed measurement of changes were used to achieve the aim of the master thesis. It was completed by using VKM programme.
|
|
|
Renewal of the cadastre documentation by revision in the cadastre unit Rakvice
Nováková, Martina ; Kutálek, Stanislav (referee) ; Šváb, Tomáš (advisor)
This diploma thesis deals with a renewal of cadaster documentation by revision in a cadastral area Rakvice. This work describes single phases of the renewal and some irregularities, that occurred during the work, including their solutions. The next part of the thesis deals with comparison of a digitalized cadastral map, which came from the revision, and a digital cadastral map, which was created by a new mapping. The appendix contains protocols of processes of transformation and graphic comparison of cadastral maps.
|
|
|
Renewal of cadastral documentation in cadastral unit Lomnice u Tišnova
Tolášová, Pavlína ; Cwik, Jan (referee) ; Berková, Alena (advisor)
The master’s thesis deals with renewal of the cadastre documentation by revision of analogue map in the map scale 1:2 880 in cadastral unit Lomnice u Tišnova. The area of interest is built-up area because rural area was revised by complex land consolidation. The analogue map is revised to digital map based on the Instruction for renewal of the cadastre documentation and the conversion as amended. The result of this master’s thesis is a design of the digital form of the cadastral map created in MicroGEOS Nautil and comparison of the parcel area shown on owner's folio with the parcel area determined from the graphical file.
|
|
|
Renewal of cadastral documentation in cadastral unit Lomnice u Tišnova
Svobodová, Veronika ; Cwik, Jan (referee) ; Berková, Alena (advisor)
This diploma thesis describes the procedure of renewal of the cadastre documentation by remaking original maps. Redesigned location is Lomnice u Tišnova, more precisely its urban area. For this area is still valid map in the scale of 1:2880. Digitalization of analogue maps is one of the most important tasks in the cadastre department. On the basis of these facts, this diploma thesis was created in this cadastre territory and the official renewal of these territory maps has been set on the 2015. The external area of the territory is already a digital cadastre map. Renewal of the cadastre documentation was guided by the cadastre documentation renewal guide with the latest changes. The result of this diploma thesis is a project of digital form of the cadastre map, created in MicroGEOS Nautil software.
|
|
|
Setting out of the part of the cadastral boudary
Votoupal, Martin ; Staňková, Zuzana Pecinová (referee) ; Berková, Alena (advisor)
This master thesis deals with identifying cadastral boundary between cadastral areas Holštejn and Lipovec u Blanska. The first part deals with the fundamental theoretical data that are required to create this thesis. In the second part there are analyzed the procedures and actions at various stages of formation of the thesis. The main output of this thesis will be the survey sketch for the geometric determination of cadastre unit. After consultation with employee of cadastral workplace, setting – out of the cadastral boundary will not be realized.
|
|
|
Processing of Historical And Modern results of the Survey Activities Decision
Vosyka, Luboš ; Šváb, Tomáš (referee) ; Kutálek, Stanislav (advisor)
The objective of this thesis is practical processing of historical and modern results of the survey activities decision in part of k.ú. Leština u Světlé (680541) in the range parcel KN no. 138/41 - 44, no. 138/49 - 50, no. 138/64 - 65, no. 138/72 and no. 138/81 - 96. Thesis contains description of the measurement situation in the field, data processing and description of calculations. It also contains a description for finding necessary documents and their practical processing. This thesis output is a record of setting – out the lot boundaries.
|
|
| |
|
|
Making of the survey sketch using program VKM in the digital cadaster map
Trubač, Václav ; Berková, Alena (referee) ; Sedláček, Svatopluk (advisor)
The bachelor thesis deals with the survey sketch processing in the digital cadastral map in the program VKM. The survey sketch to mark the building in the Srnojedy cadastral in the district of Pardubice, was chosen for the purpose of the work. The work is divided into two parts. The first part is theoretical and describes the digital cadastral map, the survey sketch and documentation of detailed measurements of changes. The second part is practically oriented and describes the work of the assigned survey sketch in the field and in the office. Most space is devoted to a detailed description of the creation of survey sketch in VKM. Finally, several complements and extensions are designed to the features of the program, which could facilitate the survey sketch processing. The result of this work is an analog form of survey sketch and documentation of detailed survey of changes and change processing data in the exchange format of cadastral.
|
guest ::
