National Repository of Grey Literature 114 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
Utilization of cold spray technology for ballistic applications
Kuník, Adam ; Doubrava, Marek (referee) ; Řehořek, Lukáš (advisor)
The goal of this bachelor's thesis is to get familiar with cold spray technology, as an alternative in the field of both coating application and, among other things, its use for the repair of some parts with complex shapes within additive manufacturing. It then coveres the basic principles of this method, the metal powders used, the characteristics of the device, familiarization with the issue of ballistic protection and terminal ballistics. In the second, experimental part, the quality and mechanical properties (especially the hardness, porosity, and coating thickness) of this layer produced by the above-mentioned method, as part of ballistic protection for light armored vehicles, are evaluated.
Influence of alloying elements on the solubility of titanium in magnesium alloys
Matocha, Martin ; Buchtík, Martin (referee) ; Březina, Matěj (advisor)
This bachelor's thesis examines the influence of alloying elements on the solubility of titanium in magnesium alloys. In the theoretical part, a literature review was conducted on the topics of the creation, composition, processing, and brief analysis possibilities of magnesium alloys, with an emphasis on the potential for alloying magnesium alloys with titanium. The experimental part focused on the preparation of systems with various compositions to achieve the integration of titanium into the magnesium alloy. After preparation of the samples of the given systems, their analysis was performed using SEM/EDS and XRD. Based on the ongoing results of the samples analysis, efforts were made to optimize the holding time of the samples of the given system at a temperature of 905°C. It was found that during the stabilization of the modification of titanium, it is possible to achieve mixing of titanium, zinc, and magnesium. The condition for the formation of the modification of titanium is the highest possible temperature allowed by the system. However, the temperature must exceed at least 881°C. The stability of the modification of titanium is also supported by the absence of alloying elements that promote the stability of the modification of titanium. The mixture of elements in the aforementioned system has not yet been described in the scientific literature.
Titanium, Alloys and Intermetallics for Biological and Industrial Applications
Vespalec, Vítězslav ; Jech, David (referee) ; Čelko, Ladislav (advisor)
The creation of this Bachelor´s thesis was performed as a search retrieval, which includes basic information about titanium and its alloys. In the first chapter is stated history of titanium manufacturing. Following chapter include the most important property of pure titanium, such as alotropic modifications of the crystal grid, chemical, physical and technological characteristics, there is also space, that is assigned for using contemporary division of titanium alloys, detrimental effect of impurity, shape memory effect and intermetallics instance. Third part concern about selected application in industry. The conclusion pursue about biocompatibility factor and possibility use titanium and its alloys in implantology and dental applications.
Survey of applications of investment casting from non-ferrous alloys
Tučková, Eva ; Mikulka, Vít (referee) ; Horáček, Milan (advisor)
This bachelor thesis is research, which is focused on the theme of application of castings manufactured by technology investment casting of non-ferrous alloys, namely aluminum, magnesium and titanium, in various industries. The individual chapters describe the properties of pure metals, sorting and properties of foundry alloys and particular applications.
Analysis of material to be machined influence on the wear and tool durability
Tolkner, Josef ; Novák, Zdeněk (referee) ; Bumbálek, Bohumil (advisor)
Machining technology is a multi disciplinary field, and together with the economy are playing always more important role in the success of the enterprise market products and services. Recent studies show that it requires very close link between technology, management and information technology such as the integration process and production planning, simulation of manufacturing systems, production flexibility, virtual machines, control algorithms, etc. The key changes are based on the requirements for miniaturization of products, higher production accuracy, closer tolerances, better surface quality, part of weight reduction, reduction of lot size and reducing production costs. The report is focused on machining titanium alloys. In the theoretical part are presented the properties and the distribution of titanium alloys. In the practical part is then carried out an experiment aimed to influence the composition of workpiece material on tool wear. Experiment results and recommendations are listed at the end of this report.
Electrodeposition of thin layers TiO2
Jakubis, Ivan ; Vondrák, Jiří (referee) ; Sedlaříková, Marie (advisor)
This work deals with issues of electrochromism and making active electrochromic film of titanium dioxide. By using various precursors consisting titanium element active film was electrodeposited on glass substrates covered with transparent conductive thin-film In2O3:Sn (ITO). Electrochromic characteristics of these substrates that were electrodeposited for different times and with different voltage have been studied. Than there has been studied the impact of various annealing temperatures on electrochromic characteristics.
Multi-Platform Mobile Applications
Lang, Jiří ; Kolář, Dušan (referee) ; Burget, Radek (advisor)
This thesis describes the development for mobile devices, with a focus on cross platform development. It introduces the most used tools for multiplatform development and their principles. It also deals with design and implementation of mobile application for iOS and Android operating systems. This application serves for management of time spent on various projects and tasks using graphs and statistics. It also provides tools for better management of team projects for small businesses and entrepreneurs.
Optimization of biocompatible Ti/hydroxyapatite-based composite blends fabrication
Slovák, Tomáš ; Matějková, Michaela (referee) ; Čížek, Jan (advisor)
The bachelor's thesis deals with optimalization of biocompatible composite mixtures based on titanium and hydroxyapatite. The theoretical part is focused on biomaterials, specifying Ti and HA in more detail. The following section pertains to the principle of mechanical alloying. Preparation of the biocompatible composite mixtures by mechanical alloying and their following analyses are described in the experimental part. Results obtained in the experimental part are summarized in the discussion.
Machining of titanium alloys
Müller, Peter ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
The bachelor thesis specifies the most important properties and production processes of titanium, categorizes titanium alloys and their properties. In the experimental part, titanium alloy Ti-6Al-4V blank was machined and cutting forces were measured, depending on selected feeds per revolution. Subsequently specific cutting force was calculated and compared with values given by the tool manufacturers.
Oxidation behavior adjustment for TiAl intermetallics by Al-Y multilayers
Handrk, Jiří ; Tkachenko, Serhii (referee) ; Jan, Vít (advisor)
Mechanické vlasnosti intermetalika na bázi titan hliník Ti-46Al-7Nb-0.7Cr-0.1Si-0.2Ni jsou konstatní do teploty 700 °C. Nad touto teplotou slitina oxiduje. Cílem této práce bylo zlepšit oxidační vlastnosti pomocí kovové multivrstvy na bázi yttrium hlinik. Pro depozici vrstev byla použita metoda PVD. Na vzorky byly naneseny vrstvy čistého ytria nebo kombinace yttrium, hliník. Vzorky byly následně žíhány v inertní atmosféře na 700°C a 900°C nebo nebyly. Kvalita nanesených vrstev byla zkoumána pomocí scratch testu a EDS analýzi. Dále byly vzorky izotermicky oxidovány na 900°C po dobu 100 hodin. Na vzorcích byly po oxidaci prováděny měření pevnosti v tříbodovém obybu a měření hmotnosti. Chemické složení oxidické vrstvy bylo vyhodnoceno pomocí EDS. Žádná z vrstev s nebo bez žíhání neprokázaly zlepšení oxidických vlastností. Vyšší teplota žíhání prokýzala zlepšení mechanických vlastnotí vrstvy, ale zhoršení materiálu.

National Repository of Grey Literature : 114 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.