|
Light induced catalytic degradation of a series of common antibiotics and the corresponding HPLC analysis
Smítková, Karolína ; Klusoň, Petr (advisor) ; Krystyník, Pavel (referee)
1 Abstract The continuous advance in industry, general intensification of processes and urbanisation inevitably leads to production of new substances each year, collectively referred to as emerging pollutants (EPs). As the mass production of EPs increases, the demand for wastewater treatment plants also dramatically increases. The inadequacy of conventional tretament plants in removing EPs, such as pharmaceuticals, pesticides, personal care products, and others, results in the presence of these substances in surface and groundwater at significant concentrations. The often negative or unclear impact of EPs to the environment furhter emphasizes the urgency of this issue and requires a corresponding response. Photocatalysis belongs to the co-called advanced oxidation processes, key techniques for ensuring effective wastewater treatment. This thesis is focused on the photocatalytic degradation of tetracycline, trimethoprim and sulfamethoxazole, three common antibiotics frequently found in wastewater. Graphitic carbon nitride, a promising material in research of fotocatalytic degradation, was used as a photocatalyst and was activated by visible light emitted from a mercury xenon lamp. Experiments were conducted in batch setup and in microphotoreactor to compare the efficiency of both systems. Rhodamine B was...
|
|
Thin Film Photocatalysts on the Basis of g-C3N4
Schimon, Domonik
This study revolves around the synthesis of powder g-C3N4, fabricationof thin g-C3N4 films and their efficacy in degrading pollutants, assessed through experimentation in a batch photoreactor (BPR) and a slit geometry photomicroreactor (PMR)2. The photocatalytic activity of g-C3N4 was tested with 4 different model substances: fluorescent dye, rhodamine B, was used as a reference substance and three separate antibiotics, which are emerging wastewater pollutants, namely tetracycline, trimethoprim, sulfamethoxazole.
Plný tet: PDF
|
|
Preparation and charakterization of WO3 layers by brick and mortar method
Blecha, Tomáš ; Pekárková, Jana (referee) ; Králová, Marcela (advisor)
This master’s thesis deals with thin films of tungsten trioxide, which are prepared by combining nanoparticles and a binder. The composite consisted of either milled WO3 nanoparticles of different sizes or the combination of milled nanoparticles and dopamine stabilized peroxotungstic acid. The prepared compositions with the addition of templating agent polyethylene glycol were deposited on conductive FTO glass by spin coating method and further used as a photoanode in a photoelectrochemical cell. This work then focuses on studying the influence of the milled particle size and the amount of binder in the composition on the physicochemical properties of WO3 photoanodes in an attempt to measure the highest photocurrrents.
|
|
Hybrid titania-silica layers on polymeric supports
Bednárková, Jana ; Pekárková, Jana (referee) ; Dzik, Petr (advisor)
This bachelor thesis deals with titania-silica photocatalytic layers on polymeric supports. The theoretical part involves the study of properties and possibilities of preparing the layer and it is mainly focused on the influence of silica on the nature of layers. The experimental part of this thesis investigates the influence of layer thickness on the degradation rate of 4 different dyes.
|
|
Photocatalytic activity of printed hybrid layers of titanium dioxide
Sýkorová, Kateřina ; Krystyník, Pavel (referee) ; Veselý, Michal (advisor)
The main aim of this thesis was to optimalise composition of the titanium dioxide with a silica binder deposited on a PET foil. Emphasis was put on achieving maximum possible adhesion and hardness of the layer and the effect on photocatalytic activity. For the evaluation of photocatalytic activity comparative experiments with prepared layers were performed. Benzoic acid, dimethyl sulfoxide and azo dye Acid Orange 7 were used as model pollutants. Photocatalytic activity was investigated using UV-VIS spectrophotometry, formal rate constants and degree of conversion were also determined. The study results can be used for removing water pollutants from the water solution.
|
|
Photocatalytic activity of hybrid layers of titanium dioxide for water disinfection
Morávková, Eva ; Krystyník, Pavel (referee) ; Veselý, Michal (advisor)
This bachelor thesis deals with the preparation of thin layers based on nanoparticles of titanium dioxide and organosilica binder. The effect of the ratio of the two components on the properties of the formed immobilized layers is studied. Two different ratios between TiO2 and organosilica binder and two different types of commercially available oxides were used. The work focuses mainly on the formation of thin immobilized TiO2 layers and their properties. Their photocatalytic activity was determined by degradation of model pollutant in solution, as well as their mechanical hardness and layer adhesion were determined. All prepared layers were treated with muffle furnace annealing and UV-C curing. Samples that had undergone a complete treatment were subjected to individual tests. The model dye was Acid Orange 7. Photocatalytic activity was characterized by a formal 1st order rate constant, which was detected by UV/VIS spectrophotometry. Mechanical hardness and adhesion were determined using ISO standards.
|
|
Material printing of UV dosimeters
Třešňáková, Andrea ; Čeppan, Michal (referee) ; Veselý, Michal (advisor)
The subject of this theses is a preparation of chemical UV dosimeters working on diverse principles and their printing. Three UV dosimeters were prepared. The first one is based on a photocalalytic reaction of titanium dioxide with redox dyes. Two other dosimeters are based on a reaction of a photolabile substance able to produce an intermediate reacting with a dye. Prepared dosimeter compositions were coated using a material roll-to-roll printing machine on a corona-treated PET foil. Prepared dosimeter compositions were calibrated for desired exposition to UV radiation doses. Validity of a reciprocity law was verified.
|
|
Experimental verification of photocatalytic activity of TiO2 in concrete
Steinbergerová, Ivana ; Přikryl, Jan (referee) ; Hela, Rudolf (advisor)
This thesis is focused on gathering all available information on the application forms of photocatalytic TiO2 in concretes, especially in the surface layers of precast and monolithic structures. The paper describes in detail the properties of titanium dioxide alone, his special abilities, leading to a substantial improvement of the environment, through photocatalysis. Further verification methods are described photocatalytic activity of titanium dioxide and titanium dioxide application in real projects. The practical part is tested recipes of secondary coatings from the production of company Precheza a.s. Přerov.
|
|
Preparation of photocatalytically active layers of titanium dioxide
Šeffer, Lukáš ; Jančovičová, Viera (referee) ; Veselý, Michal (advisor)
This bachelor work gives an overview about preparation of titanium dioxide and silicon dioxide thin films by sol-gel process, using coating methods as spin coating, dip coating, capillary and cell coating, flow coating, spray coating, pyrosol process, chemical vapour deposition and printing. The procedures of composite films preparation obtained by mixed sols of titanium dioxide and silica dioxide are also discussed together with preparation of double layer films, when titanium dioxide is coated on glass substrate covered by a silica dioxide layer. The methods of photocatalytic activity testing are the important part of this work.
|
|
Study of xenobiotics and biologically active compounds degradation on titanium dioxide
Píšťková, Veronika ; Lisá,, Hana (referee) ; Vávrová, Milada (advisor)
Heterogenous photocatalysis using titanium dioxide seems to be a promising method for disposal xenobiotics from the environment. The aim of this diploma thesis is the study of degradation of selected xenobiotics and biologically active substrances applying this method. Theoretical part of diploma thesis deals with the principals of heterogenous photocatalysis by means of a semiconductor TiO2 and the examples of its possible application are mentioned too. The compounds which could be appropriate for a study of degradation were selected from the group of pharmaceuticals and pesticides. The properties of target substances and their environmental impact were described. Furthermore, a bibliographic search focused on the possibilities of their analytical determination was conducted. The experimental part of the thesis describes the experiments with photocatalyst in a form of powder as well as with immobilized photocatalyst in thin layer on a carrier. Identification and quantification of analytes was realized by high performance liquid chromatography with mass spectrometic detection.
|