National Repository of Grey Literature 6 records found  Search took 0.00 seconds. 
Vliv alkalických kovů v kalcinovaném Co-Mn-Al LDH na katalytický rozklad N2O.
Obalová, L. ; Jirátová, Květa ; Kovanda, F. ; Galejová, K. ; Pacultová, K.
The effect of various amounts of potassium in Co-Mn-Al spinel catalyst on N2O decompositon was examined. Different catalytic performance of samples with different amount of K in th epresence of H2O and NOx could be related to changes in acidity and basicity of catalyst surface.
Vlastnosti, aktivita a selektivita kalcinovaných Co(Mg)Al(Mn prelurzorů typu hydrotalcitu při totální oxidaci VOC.
Mikulová, Zuzana ; Jirátová, Květa ; Kovanda, F. ; Balabánová, Jana ; Bastl, Zdeněk
The effect of various Co:Mg:Mn:Al molar ratios (MII/MIII being 2) on physical-chemical properties of resulting calcined catalysts was studied and on thein aktivity and selektivity in total oxidation of toluene and ethanol.
Dlouhodobá stabilita zeolitických MFI membrán
Hrabánek, Pavel ; Zikánová, Arlette ; Bernauer, B. ; Fíla, V. ; Brabec, Libor ; Šolcová, Olga ; Kočiřík, Milan
The aim of the study is to monitor zeolite membrane flux and separation factor as a function of total molar amount fed to the zeolite membrane surface area. The flux of permeating components (n-butane, isobutane) was reduced by factor of 1.6 for n-butane and 2.3 for isobutane. Ideal separation factor increased from 16 to 26 with increasing total molar amount of butane isomers fed to the membrane.
Hydrodesulfurizace na sulfidických bimetalických katalyzátorech
Vít, Zdeněk ; Kaluža, Luděk ; Gulková, Daniela ; Zdražil, Miroslav
Alumina-supported Mo sulfide catalyst was promoted by small amounts of Pd, Rh, Pt and Ru (below 0.8 %). The activity in hydrodesulfurization (HDS) of benzothiophene (BT) was compared with activities of the conventional Mo/Al2O3 and CoMo/Al2O3 catalysts at 330-390oC and 16 bar. The addition of noble metals (NM) led to the improvement of activity and to synergetic effects (SE) up to about 4. The Pd promoted sample was the most active from all NM based catalysts, but less active in comparison to the CoMo system.
Vysokopovrchové hydrodesulfurizační katalyzátory MoO3/TiO2
Gulková, Daniela ; Kaluža, Luděk ; Vít, Zdeněk ; Horáček, Jan ; Macháčková, Eva ; Zdražil, Miroslav
MoO3/TiO2 were prepared by impregnation of TiO2 supports with surface areas of 140, 230 and 407 m2g-1. MoO3 loading was in the range 2-32wt.%. The point of zero charge of the supports was 5.0, 8.1 and 10.5, respectively, and decreased with MoO3 loading to the value for MoO3 (2.1). According to the point of zero charge the supports were saturated with a molybdena monolayer at approximately 12, 24 and 14 wt.%, respectively. Temperature-programmed reduction exhibited four peaks, which were assigned to the stepwise reduction (Mo6+ to Mo4+ to Mo0) of tetrahedral monolayer species, po
Příprava zirkoniových nosičových hydrodesulfurizačních katalyzátorů rozprostíráním s asistencí vody.
Kaluža, Luděk ; Zdražil, Miroslav
Hydrodesulfurization catalysts were prepared by consecutive deposition of Mo and then Co(Ni) from aqueous slurries of e.i. MoO3, CoCO3, NiCO3.2Ni(OH)2 or by conventional way for comparison. It was found that using principles of water-assisted spreading led to highly active catalysts with monoclinic ZrO2 as the carrier in hydrodesulfurization of benzothiophene.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.