|
|
House with Place of Business
Lux, Ondřej ; Šafářová, Markéta (referee) ; Lavický, Miloš (advisor)
This is a family house with an establishment, which has its own entrance. The house is situated in the Pardubice region in the town Letohrad, cadastral Letohrad. The building consists of two floors. The house has a garage. The building is covered with a flat roof above the second floor, above the first is a flat green roof above the living room in the form of terraces. The building is designed from the structural system VELOX.
|
|
|
Apartment House
Matulíková, Monika ; Dvořák, Martin (referee) ; Lavický, Miloš (advisor)
This bachelor‘s thesis deals with a project of an apartment building in Valašské Meziříčí. This is a detached building with a slightly sloping ground with three floors above ground and one underground floor. On the above – ground floors are 3 flats of 3 rooms + kitchen corner and 3 flats of 4 rooms + kitchen corner, there is a technical background on the basement floor. Parking spaces are provided on the parcel. The construction system is made of the Porotherm masonry components. Horizontal structures are made of cast-in-place reinforced slab, the roof is designed as a flat roof.
|
|
|
Masonry House
Pražan, Tomáš ; Šafářová, Markéta (referee) ; Lavický, Miloš (advisor)
The aim of this bachelor thesis which is called ,, A brick- built detached house ‘‘si to create documentation for carrying out constrction. The house is designed for a four member family. It is situated in a suburb of village Borová u Poličky. The building has been designed as a detached house with two floors and no basement. The first floor consisted of two parts- a technical and aktive one. In the techical part, there is a garage for a car, technical room, homework room, staircase and toilet. In aktive part, there is a living room and kitchen with dining room. On the second floor, there is a three rooms, bathroom and dressing-room. The non-bearing walls in1.NP is made of brick breeze blocks Heluz, on 2.NP is made of plasterboard partitions. The ceiling is made of POT girders and ceiling inserts Miako. Family house is covered with a gable roof of roofing Bramac max 7°.
|
|
|
Apartment House
Baroň, Alexandr ; Dvořák, Martin (referee) ; Lavický, Miloš (advisor)
Topic of this bachelor's thesis is design of apartment house, located in town of Otrokovice. It is detached building with partial basement, flat roof and it is situated on a slightly sloping terrain. The object is five-storeyed. The first floor serves for technical and storage use. Second, third and fourth storey contains apartment units, always two per floor. The last storey serves as an access to roof and as a elevator machine room. Foundations are strips from plain concrete, vertical framework is from THERM type of blocks, horizontal framework is from reinforced concrete and roof is flat.
|
|
|
Boarding House
Makovský, Michal ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The subject of diploma thesis is a new-build of boarding house with restaurant. The building is situated in village Opatov. The building has three floors and another one underground. The underground floor is just under the part of the building. The building is situated on the edge of village Opatov and the terrain around is slightly steep. The object has shape of rectangle. The first floor is slightly wider than second and third floor. On the wider part of first floor is situated terrace for second floor. In the underground floor serves as technical background and storage facility. On the first floor is situated restaurant with kitchen, facilities for staff, reception with office and some other storage facilities. The second and third floor are used for lodging of guests. The capacity of pension is 42 beds and in restaurant about 64 quests. The ventilation of first floor is secured by air-handling system situated in underground floor. The second and third floor are ventilated by local air-handling systems with recuperation air conditioning. The roof of the object is saddle roof with sheet covering. The supporting construction of the main roof are truss girders. The terrace is built like flat roof with concrete pavage, the circumferential walls in the underground are made from concrete with insulation of XPS and in the upper floor are made from brick blocks with insulation from EPS with mineral wool. Interior walls are made also from brick blocks. The horizontal constructions are made as reinforced concrete ceiling slabs. Part of project documentation are assessment in terms of building physics and fire safety solution of building.
|
|
|
Gluing as a method for flat roofs stabilization
Šafářová, Markéta ; Oláh,, Jozef (referee) ; Plachý,, Jan (referee) ; Lavický, Miloš (advisor)
Flat roofs are very desired type of building roofing these days. We can find flat roofs in construction of family and apartment houses, manufacturing and storage buildings, office buildings, shopping centres, etc. and not only in constructions of new building, but in substantial amount also during reconstruction. For every flat roof it is necessary to design a way of roof plies stabilization against wind suction. Gluing is one of many used methods of flat roof stabilization. The gluing itself can be implemented by innumerable adhesives of various compositions from many manufacturers. Gluing has advantages and disadvantages as every method. Lack of information can be considered as key disadvantage. Especially the lack of information about strength of gluing joints. The dissertation is focused on polyurethane adhesives, their application for stabilization of layers in flat roof and experimental determination of strength values of glued joints. The first phase of the dissertation aims to create a test methodology for experimental measurements. As a part of the methology to create a test model, a test apparatus and a procedure for experimental measurements. In next phase dissertation focuses on experimental measurements and their evaluation. Research was primarily focused on properties of gluing joint depending on the amount and type of the adhesive, material of bonding layers and technological indiscipline. The results of experimental measurement provide numerical values of strength of the gluing joints and pointed to risky situations which can occur during realization. The conclusion provides practical recommendations and possible opportunities for continuation of the work on this topic.
|
|
|
Mixed-use Building
Jaroš, Radek ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The subject of the master´s thesis is a project documentation of a mixed-use building within the scope of the implementation documentation. The main goal of the thesis is the design of the layout, construction and material solution, completed by design of the fire safety solutions and assessment in terms of building physics. The mixed-use building is designed as a stand-alone building with one underground floor and three above-ground floors. In the underground floor there is an area for mass parking, the main technical facilities of the building and other associated spaces. On the 1st above-ground floor, there is another area for mass parking, two commercial spaces (a cafe and a stationery store), the technical facilities of the building and other associated spaces. On the 2nd floor there are two separate administrative operations with large offices and associated spaces, the remaining area of the floor is occupied by a generous terrace. On the 3rd above-ground floor there are identical operations as on the 2nd floor with the exception of the terrace. The construction system is designed as a reinforced concrete monolithic skeleton supplemented with a reinforcing reinforced concrete core for two elevator shafts and further supplemented with reinforcing peripheral beams. The ceiling structures are reinforced concrete monolithic locally supported slabs. The building is founded on the reinforced concrete slab placed on drilled shafts. The outer wall is predominantly made of ground brick blocks or reinforced concrete monolithic walls with an external thermal insulation composite system and, to a lesser extent, of a curtain walling, which is made from a mullion-transom system. The roof is designed as a flat roof with a vegetation layer.
|
|
|
Logistic Centre
Hrobař, Pavel ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
This thesis deals with proposal detached three-storey office building, which consists of the brick section and monolithic reinforced concrete frame. The building is covered with a flat roof. The design focus is on the overall consistency between spatial, structural, static, fire safety, acoustic and thermal technical requirements. Documentation is prepared for the building construction. The graphical part of documentation has been processed in the AUTOCAD software.
|
|
|
Apartment House
Pražan, Tomáš ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The main goal of this diploma thesis „apartment building“ is create project documentation for building construction. This apartment building located in Policka's suburb is designed for 32 people living in 8 apartments. The building is designed as detached house on four floors, without basement. The first floor above the ground is used as a apartment for handicapped people, common rooms, cleaning room, maintenance room, and garages for 5 cars. In the second floor above the ground there are apartments. In the last floor above the ground there are entrance to rooftop and an apartment for 7 people. All floors are connected with staircase and elevator. Bearing and partition walls are lined with ceramic bricks Heluz, heating contact system. Ceiling panel system is designed Spiroll. The roof is flat.
|
|
|
Apartment House
Beran, Tomáš ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
Object of presented dissertation is proposition of apartment building. Apartment building is based on wood technology with two stages without cellar and with flat roof. Block of flats is designed with 8 flats. Some of them with big terrace. Object is situated in Olomouc, Czech Republic.
|
guest ::
