|
| |
|
|
Proactive system maintenance machines in engineering practice
Morcinková, Lenka ; Řezníčková, Hana (referee) ; Hammer, Miloš (advisor)
This bachelor thesis concerns the technical diagnostics and maintenance of machine tools. The first part of it deals with this topic theoretically, the practical part focuses on the application of specific measures. Bachelor thesis includes vibrodiagnostic measurement of the lathe, suggestion of the proactive maintenance system and other activities that could help with the development of maintenance management in company SMC Industrial Automation CZ s.r.o.
|
|
|
Predictive machine tools maintenance system with the use of vibrodiagnostics
Semotam, Petr ; Nahodil, Petr (referee) ; Hammer, Miloš (advisor)
This diploma thesis concerns issues of predictive and condition based maintenance system of machine tools with using a vibrodiagnostics. It studies and researches its impacts through the basic processes of the maintenance system and characterizes the vibration diagnosis as its tool and mean. There is also described a process of putting condition based maintenance into practice in the practical part of the thesis. The development is realized at Siemens Ltd. Brno with all its requirements and aspects such as a maintenance audit which means the decision on the suitability of condition based maintenance within the current maintenance system, technical analysis as a part of introduction of vibration diagnosis and the practical example of acquiring, recording and assessment of measured vibration. Prior to the end the economic evaluation of the planned predictive maintenance system and the design of the general model of development and implementation of the maintenance system into practice are included.
|
|
|
Theory of maintenance and reliability
Ličko, Ľubomír ; Jankových, Róbert (referee) ; Hammer, Miloš (advisor)
This work deals with the theory of maintenance, which analyses the basic structure and systems of maintenance. Then explains the concept of reliability and maintenance affect the reliability of the technical system. Further work will focus on the reliability centered maintenance (RCM), whose solution is shown on the equipment for injection molding Ferromatik Milacron K-TEC 250.
|
|
|
INTEGRATED SOLUTION OF DIAGNOSTICS OF PRODUCTION EQUIPMENT IN THE CZECH ENERGY INDUSTRY
Cvešpr, Pavel ; Szabó,, Radek (referee) ; Kratochvíl, Petr (referee) ; Hammer, Miloš (advisor)
This dissertation thesis is concerned with the diagnostics of the main production facilities in Czech power engineering with a focus on its integrating role in the process of gaining, saving and processing information for the purpose of evaluating the technical state of the operated facilities and the plan to manage their lifetime. It is divided into two parts, theoretical and practical. The theoretical part presents the conclusions of examination of the needs of involved workers in the areas of diagnostics, maintenance and expert assessment of technical state of equipment. These conclusions were formulated based on the completed analysis of the current status ("as - is" analysis) of performing diagnostics of systems operated in the technological units of both nuclear and classical power engineering. The monitored equipment involves electrical installations and machinery, steel and building constructions, measuring instruments and vibrodiagnostics. Based on the analysis results, process diagrams are created for the solution of partial tasks. The analysis of the proposed solution for problems in question ("should - be" analysis) includes a design of the fundamental scheme of the data model for a software solution and a design of data flows from the individual data sources. The following part presents an application layer which includes a detailed description of major functionalities. Further, important activities and procedures are described that are necessary to evaluate the technical state of equipment. The practical part deals with the implementation of the LTO suite software product in the environment of power engineering in Czech Republic, specifically within ČEZ, a.s.. The LTO suite functionality is demonstrated in this part of the thesis by screens recorded within the LTO suite individual modules, which work above the actual data. It starts with the initial screen for configuration of displayed data, continues to present examples of the equipment register, planning, processing and saving of information collected through the diagnostic activities over to the module of integration – analytical layer, which is designed for evaluation of the technical state of equipment at the entered date with a reporting output. The thesis also includes the chapters on "Aims of the Study" and "Conclusion". The key chapter presents the "Benefits of the Study", whose overview describes the original results of the research as well as those applicable also outside the power engineering area.
|
|
| |
|
|
Modern approaches in the maintenance field
Pšenková, Tereza ; Řezníčková, Hana (referee) ; Hammer, Miloš (advisor)
This master thesis deals with position of the maintenance in the company structure and with modern management approaches. One of the highest levels of maintenance is the proactive maintenance, which is using the technical diagnostics to find out the causes of failures. The most inportant in case of machines are vibrodiagnostics and thermodiagnostics, which are going to be applied on the motors in company Bosch Diesel s.r.o.
|
|
|
Theory of maintenance and reliability
Novák, Marek ; Veselkov, Vladimir (referee) ; Hammer, Miloš (advisor)
The Bachelor thesis is focused on theory of maintenance and reliability. Question of maintenance and reliability is very important during service machine and it can be helpful to reduce operating costs. In the Bachelor thesis are describes basics terms asociated with the theory of maintenance and reliability. Also it provides information about gradual evolution of maintenance systems. In the last part is an examle of engeneering practice with summary and evaluation of an example.
|
|
|
Management and maintenance engineering
Pšenková, Tereza ; Řezníčková, Hana (referee) ; Hammer, Miloš (advisor)
The object of this thesis „Management and maintenance engineering” is an introduction of maintenance theory and its integration in the company. The theoretical part of this thesis deals with the basic terms and methods of maintenance management from corrective maintenance till complex productive maintenance. In practical part it is focused on the implementation and progress of TPM management at the specific workplace.
|
|
|
Contribution to the Diagnosis of Power Oil Transformers
Šimková, Martina ; Poliak,, Ján (referee) ; Szabó, Radek (referee) ; Hammer, Miloš (advisor)
This dissertation thesis deals with the diagnotics of power oil transformer. It consists of the theoretical and practical part At its beginning, the theoretical part deals with an general description of the transformer and its connection. Focus is given to aspects of the life of the transformer insulation system (oilpaper). Further, the technical diagnostics is analyzed, with description of quantities of gasliquid chromatography, the oil condition and condition of conductor insulation. Another important part of the thesis consists of an expert system, which is described generally from the past to the present. Characteristics, types and structure of expert systems are mentioned here, with its advantages and disadvantages. The practical part starts with a description of the data file, which is further used in the thesis. Main practical part is divided into three parts - the results of gas-liguid chromatography, selected results and expert systems. In the section entitled "Results of gasliquid chromatography", there is an analysis of selected properties of time series and temperature dependency of gases. Moreover, the methods of the ratios of gases such as Duval Triangle method are described. The second part entitled "Selected other results" shows the time dependency of variables and the neutralization number, along with the breakdown voltage dependency, and time of dependency, gas and moisture content in insulating oils. There is also a temperature dependency of moisture content dissolved in insulating oil discussed, as well as results of selected correlations, such as the correlation values of gas chromatography with state variables insulation of wires. The last part, "Expert systems", provides specific information about developed expert system. It describes the environment chosen for its development, followed by a description, features and verification of the expert system. Examples of the consultation results are included. All achievements of the individual parts are always summarized at the end of each section. The thesis contains chapters "Objectives of the work" and "Conclusion". The most important chapter is "The contribution of the work." It contains original work results and the results applicable in industry.
|
guest ::
